Re: Digest Number 95

Masami,
You seem to be saying that each of your BRIs has only one SPID and
directory number.    It has been my experience that bonding will not work
unless you have the BRIs conditioned with 2 SPIDs and Directory numbers,
such as National-1 specs.      All three BRIs must be identical, and all
have identical routing.   We had an instance where one of our BRIs was
assigned to a different CO than the others, and those would not bond.
Attached to separate email to you is a spec we give to our service
providers that works well, although they usually say Huh!????

On the other hand, you may be able to dial each BRI separately, and get
them all up at the same time without bonding.   Our Adtran IMUX would do
that, and although it was difficult, we could do a non-bonded 384K call
that way when we had difficulties.    We got rid of most of our ISDN, now
use Internet2 doing most of our calls via IP.   If you can do an IP call to
a bridging service, or connect your V.35 to a bridge that is connected to a
PRI, have the bridge admin. dial for you, you will usually avoid many
headaches associated with ISDN dialing.

Paul Wagner, Assistant Director,
Media Equipment Services and Engineering
Florida International University
University Park, GL175
Miami, FL 33199
305-348-3123 - direct


                                                                                                                                                   
                      polycom-video-conference@yaho                                                                                                
                      ogroups.com                          To:       [email protected]                                      
                                                           cc:                                                                                     
                      01/24/2005 01:57 PM                  Subject:  [polycom-video-conference] Digest Number 95                                   
                      Please respond to                                                                                                            
                      polycom-video-conference                                                                                                     
                                                                                                                                                   
                                                                                                                                                   





There is 1 message in this issue.

Topics in this digest:

      1. need your assistance, please
           From: "masami" <[email protected]>


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Mon, 24 Jan 2005 09:35:11 +0900
   From: "masami" <[email protected]>
Subject: need your assistance, please

Dear Polycom users:

My name is Masami Kikuchi (http://www.onlineworkshop.net/).
I am preparing Polycom iPower 600 for realizing the cultural programme
between Beijing and Tokyo, scheduled on Saturday, 29th January (Japan and
China Time:  http://www.onlineworkshop.net/pamf/pamf.pdf), using the bonded
ISDN at 384kbps.

The problem is that:
I have three ISDN lines, 03-3655-****; 03-5678-****; and 03-5678-XXXX, and
they work okay within the border of Japan with the test calls at 128kbps
respectively.
However, to call Beijing at 001-010-10-86-****-****, only one of my ISDN
lines could connect and be visible/communicable with Beijing; the other two
lines were inactive.
Is anyone out there knowledgeable about such a phenomenon and trouble?

I would appreciate your urgent possible assitance.
This is very valuable for everybody on the list.

Best regards,

09:34JST, Monday, 24th January, 2005
Masami Kikuchi
founder/producer
Video Online Workshop
email: [email protected]
        [email protected]
URL: http://www.onlineworkshop.net/archives/
member of Satellite Application Development and Promotion Committee, Japan
Aerospace Exploration Agency (JAXA)



________________________________________________________________________
________________________________________________________________________


Archives of past messages are available by selecting My Groups |
polycom-video-conference | Messages after logging in at
http://www.YahooGroups.com
------------------------------------------------------------------------
Yahoo! Groups Links




------------------------------------------------------------------------









Archives of past messages are available by selecting My Groups | polycom-video-conference | Messages after logging in at http://www.YahooGroups.com 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/polycom-video-conference/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/