Re: Canon MD101 with firewire?

post the output of

 > carl@dv67:~$ dmesg|grep 1394

Carl K

Jeremy Stocks wrote:
 > Carl,
 >
 > Thanky for the help. I get
 >
 > Error: no camera exists
 >
 > when I use dvgrab
 >
 > Jeremy
 >
 > Jeremy Stocks......father of Elena and Dominic, not-quite Masterchef and 
gardener to the slugs at http://www.theenglishgardener.blogspot.com/
 >
 > --- Carl Karsten <[email protected]> schrieb am Fr, 13.3.2009:
 > Von: Carl Karsten <[email protected]>
 > Betreff: Re: [Kino-dev] Canon MD101 with firewire?
 > An: [email protected]
 > Datum: Freitag, 13. März 2009, 15:29
 >
 > Try using dvgrab - until you get things working, just dvgrab, no options.
 >
 > make sure you have rights to /dev/raw1394 - debian/ubuntu recently changed to
 > root:root - it's up to you to change it to something appropriate for the
 > device being plugged in (it gets used for disk and networking too)  I did:
 >
 > carl@dv67:~$ ls -l /dev/raw1394
 > crw-rw---- 1 root disk 171, 0 2009-03-13 09:26 /dev/raw1394
 >
 > carl@dv67:~$ groups
 > carl adm disk dialout cdrom sudo audio video plugdev lpadmin admin
 >
 > If you are still having troubple, post the output of dvgrab, and
 >
 > carl@dv67:~$ dmesg|grep 1394
 > [   15.015011] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5
 > (level, low) -> IRQ 5
 > [   15.067002] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]
 > MMIO=[f6100000-f61007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
 > [   16.360248] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00964cac00]
 > [34481.024044] ieee1394: Error parsing configrom for node 0-00:1023
 > [34481.705047] ieee1394: Error parsing configrom for node 0-01:1023
 > [34484.085697] ieee1394: Node added: ID:BUS[0-00:1023]  GUID[00008500017c9cea]
 > [34484.085797] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
 > [34484.214831] ieee1394: raw1394: /dev/raw1394 device initialized
 > [34484.298707] NOTE: The dv1394 driver is unsupported and may be removed in a
 > future Linux release. Use raw1394 instead.
 >
 > Carl K
 >
 > Jeremy Stocks wrote:
 >> Hi there,
 >>
 >> I think your software is brilliant and can't wait to use it.
 >>
 >> I own a Canon MD101 DV camera with a Firewire card. I went through all the
 >> forums in detail for about a week trying to get this camera to
 > "speak" to
 >> Ubuntu )V8 Intrepid Ibex - I have only recently last few months switched
 > from
 >> MS to Ubuntu). I won't buy a Canon DV camera again, but meantime I
 > have lots
 >> of DV tapes to import and simply can't do it. I have run knio under
 > sudo and
 >> tried everything. I think my Firewire works also. I've tried in
 >> Edit/preferences in Kino but can't see the device.
 >>
 >> I am not a newbie to Linux but neither am I an expert. I can follow basic
 >> "compile" and "make" sequences okay if there are any
 > fixes oiut there.
 >> Any ideas why it doesnt work?
 >>
 >> You'd be stars if you could help!
 >>
 >> Jeremy
 >>
 >>
 >>
 >> Jeremy Stocks......father of Elena and Dominic, not-quite Masterchef and
 >> gardener to the slugs at http://www.theenglishgardener.blogspot.com/
 >>
 >>


------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com