Re: Firewire quits
Reid <[email protected]> Mon, 14 Mar 2011 21:22:41 -0400
| Newsgroups | gmane.comp.video.kino.devel |
|---|---|
| Message-ID | <1300152161.2443.10.camel@rsv-linux> |
--===============0603227165031000723== Content-Type: multipart/alternative; boundary="=-H0TpOOwZvHqK8XHcE4Ms" --=-H0TpOOwZvHqK8XHcE4Ms Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit On Sun, 2011-03-13 at 17:33 +0100, Stefan Richter wrote: > On Mar 13 Reid wrote: > > I'm running Kino 1.3.4 on Ubuntu 10.10 and am having trouble importing > > DV from my camcorder using firewire. > > > > My Panasonic camcorder is recognized and the capture starts but then > > quits after a minute or two. Also, after that the camcorder is no longer > > recognized. Like it's forgotten. Computer needs to be rebooted and > > then is seen again. > > Plugging it out and in again does not help either? > > > I have looked around the 'Net and seen comments from uses that say to > > start Kino as root, > > Never run application programs as root, it's too dangerous. > > > and to use the pads command to start Kino, but it > > doesn't seem to make any difference with this issue, though that has > > helped the sound recording issue. It's odd that his just popped up > > because everything was working fine two months ago. Or so I thought. > > > > Happy to provide added spec info if needed. > > The output of "lspci -nn" would be good, also the output of "dmesg" from a > session in which you captured something and connection breaks up as you > described. Stefan - Here's the output you suggested. It's a LOT. Thanks for helping. To me, this behaves like kernel bug. For example, firewire capture also fails in kdenlive. And yet, I don't believe it's hardware (though I guess it's possible) because everything worked just fine a few months ago. Of course I realize that hardware can just fail.... I do notice in CLI capture and AVC status error..whatever that might indicate.... Anyway here the info.. And thanks. Reid reid@rsv-linux:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11) 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 06) 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) 02:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTX 285M] [10de:060f] (rev a2) 03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235] 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) 09:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] 09:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] 09:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] 09:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04) ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04) ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04) ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04) ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04) ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04) ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04) ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04) ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04) ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04) ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04) ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04) ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04) ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04) ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04) reid@rsv-linux:~$ ________________________________________________________________________________________________________________________________________________________________ reid@rsv-linux:~$ reid@rsv-linux:~$ reid@rsv-linux:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-27-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: | | | | Clipped out | | [ 2.177569] fuse init (API version 7.14) [ 2.177658] msgmni has been set to 7895 [ 2.179739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.179741] io scheduler noop registered [ 2.179743] io scheduler deadline registered [ 2.179780] io scheduler cfq registered (default) [ 2.179891] pcieport 0000:00:03.0: setting latency timer to 64 [ 2.179916] alloc irq_desc for 45 on node -1 [ 2.179918] alloc kstat_irqs on node -1 [ 2.179926] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X [ 2.179984] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.180013] alloc irq_desc for 46 on node -1 [ 2.180017] alloc kstat_irqs on node -1 [ 2.180024] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X [ 2.180086] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.180115] alloc irq_desc for 47 on node -1 [ 2.180117] alloc kstat_irqs on node -1 [ 2.180124] pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X [ 2.180189] pcieport 0000:00:1c.3: setting latency timer to 64 [ 2.180219] alloc irq_desc for 48 on node -1 [ 2.180220] alloc kstat_irqs on node -1 [ 2.180227] pcieport 0000:00:1c.3: irq 48 for MSI/MSI-X [ 2.180289] pcieport 0000:00:1c.4: setting latency timer to 64 [ 2.180319] alloc irq_desc for 49 on node -1 [ 2.180320] alloc kstat_irqs on node -1 [ 2.180327] pcieport 0000:00:1c.4: irq 49 for MSI/MSI-X [ 2.180517] \_SB_.PCI0:_OSC invalid UUID [ 2.180519] _OSC request data:1 0 1f [ 2.180523] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed [ 2.180543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.180642] \_SB_.PCI0:_OSC invalid UUID [ 2.180644] _OSC request data:1 0 1f [ 2.180753] \_SB_.PCI0:_OSC invalid UUID [ 2.180755] _OSC request data:1 0 1f [ 2.180863] \_SB_.PCI0:_OSC invalid UUID [ 2.180864] _OSC request data:1 0 1f [ 2.180972] \_SB_.PCI0:_OSC invalid UUID [ 2.180974] _OSC request data:1 0 1f [ 2.181095] \_SB_.PCI0:_OSC invalid UUID [ 2.181097] _OSC request data:1 0 1f [ 2.181204] \_SB_.PCI0:_OSC invalid UUID [ 2.181206] _OSC request data:1 0 1f [ 2.181313] \_SB_.PCI0:_OSC invalid UUID [ 2.181315] _OSC request data:1 0 1f [ 2.181422] \_SB_.PCI0:_OSC invalid UUID [ 2.181423] _OSC request data:1 0 1f [ 2.181445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.181514] intel_idle: MWAIT substates: 0x1120 [ 2.181516] intel_idle: v0.4 model 0x1E [ 2.181517] intel_idle: lapic_timer_reliable_states 0x2 [ 2.215821] ACPI: AC Adapter [AC] (on-line) [ 2.215897] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.215904] ACPI: Power Button [PWRB] [ 2.215937] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.215941] ACPI: Sleep Button [SLPB] [ 2.215975] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.285709] ACPI: Lid Switch [LID0] [ 2.285753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.285757] ACPI: Power Button [PWRF] [ 2.286414] ACPI: acpi_idle yielding to intel_idle [ 4.962489] thermal LNXTHERM:01: registered as thermal_zone0 [ 4.962499] ACPI: Thermal Zone [TZ0] (52 C) [ 4.962564] ERST: Table is not found! [ 5.002577] Linux agpgart interface v0.103 [ 5.002597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.003761] brd: module loaded [ 5.004191] loop: module loaded [ 5.004583] Fixed MDIO Bus: probed [ 5.004609] PPP generic driver version 2.4.2 [ 5.004638] tun: Universal TUN/TAP device driver, 1.6 [ 5.004640] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 5.004703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.004722] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.004739] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.004742] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.004772] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.004798] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.008717] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 5.008732] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0e06000 [ 5.024218] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.024343] hub 1-0:1.0: USB hub found [ 5.024347] hub 1-0:1.0: 3 ports detected [ 5.024407] alloc irq_desc for 23 on node -1 [ 5.024409] alloc kstat_irqs on node -1 [ 5.024414] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.024427] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.024430] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.024462] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.024485] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.028419] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 5.028432] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0e06400 [ 5.044194] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.044310] hub 2-0:1.0: USB hub found [ 5.044314] hub 2-0:1.0: 3 ports detected [ 5.044374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.044386] uhci_hcd: USB Universal Host Controller Interface driver [ 5.044473] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 5.048199] i8042.c: Detected active multiplexing controller, rev 1.1. [ 5.050663] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.050669] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 5.050671] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 5.050674] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 5.050677] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 5.050731] mice: PS/2 mouse device common for all mice [ 5.050869] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 5.050894] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 5.050980] device-mapper: uevent: version 1.0.3 [ 5.051049] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected] [ 5.051190] device-mapper: multipath: version 1.1.1 loaded [ 5.051192] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.051663] cpuidle: using governor ladder [ 5.051951] cpuidle: using governor menu [ 5.052201] TCP cubic registered [ 5.052316] NET: Registered protocol family 10 [ 5.052845] lo: Disabled Privacy Extensions [ 5.053161] NET: Registered protocol family 17 [ 5.088241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 5.342085] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.492734] hub 1-1:1.0: USB hub found [ 5.492937] hub 1-1:1.0: 6 ports detected [ 5.611747] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 5.763501] hub 2-1:1.0: USB hub found [ 5.763720] hub 2-1:1.0: 8 ports detected [ 5.841735] usb 1-1.1: new high speed USB device using ehci_hcd and address 3 [ 6.114587] PM: Resume from disk failed. [ 6.114592] registered taskstats version 1 [ 6.114890] Magic number: 3:787:708 [ 6.115045] rtc_cmos 00:06: setting system clock to 2011-03-15 00:44:24 UTC (1300149864) [ 6.115050] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.115053] EDD information not available. [ 6.115135] Freeing unused kernel memory: 912k freed [ 6.115261] Write protecting the kernel read-only data: 10240k [ 6.115503] Freeing unused kernel memory: 408k freed [ 6.115781] Freeing unused kernel memory: 1644k freed [ 6.131219] udev[147]: starting version 163 [ 6.192431] usb 1-1.3: new full speed USB device using ehci_hcd and address 4 [ 6.371075] usb 2-1.4: new low speed USB device using ehci_hcd and address 3 [ 6.497621] usbcore: registered new interface driver hiddev [ 6.500435] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5 [ 6.500489] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0 [ 6.502774] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1 [ 6.502800] usbcore: registered new interface driver usbhid [ 6.502803] usbhid: USB HID core driver [ 6.730813] ACPI: Battery Slot [BAT] (battery present) [ 7.420989] ahci 0000:00:1f.2: version 3.0 [ 7.421006] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.421062] alloc irq_desc for 50 on node -1 [ 7.421065] alloc kstat_irqs on node -1 [ 7.421077] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X [ 7.421113] ahci: SSS flag set, parallel bus scan disabled [ 7.423493] sdhci: Secure Digital Host Controller Interface driver [ 7.423497] sdhci: Copyright(c) Pierre Ossman [ 7.425733] sdhci-pci 0000:09:00.1: SDHCI controller found [197b:2382] (rev 0) [ 7.425754] sdhci-pci 0000:09:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.425837] sdhci-pci 0000:09:00.1: setting latency timer to 64 [ 7.425876] Registered led device: mmc0:: [ 7.425913] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA [ 7.425927] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 0) [ 7.425946] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.425954] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface. [ 7.425962] sdhci-pci 0000:09:00.2: PCI INT A disabled [ 7.432588] firewire_ohci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.432596] firewire_ohci 0000:09:00.0: setting latency timer to 64 [ 7.432916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.432933] r8169 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.432979] r8169 0000:07:00.0: setting latency timer to 64 [ 7.433024] alloc irq_desc for 51 on node -1 [ 7.433027] alloc kstat_irqs on node -1 [ 7.433040] r8169 0000:07:00.0: irq 51 for MSI/MSI-X [ 7.433421] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc90000678000, 00:90:f5:9f:c4:46, XID 081000c0 IRQ 51 [ 7.433958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode [ 7.433964] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 7.433967] ahci 0000:00:1f.2: setting latency timer to 64 [ 7.514200] scsi0 : ahci [ 7.514560] scsi1 : ahci [ 7.514814] scsi2 : ahci [ 7.515071] scsi3 : ahci [ 7.515289] scsi4 : ahci [ 7.515507] scsi5 : ahci [ 7.515603] ata1: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05100 irq 50 [ 7.515608] ata2: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05180 irq 50 [ 7.515613] ata3: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05200 irq 50 [ 7.515617] ata4: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05280 irq 50 [ 7.515622] ata5: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05300 irq 50 [ 7.515625] ata6: DUMMY [ 7.574237] firewire_ohci: isochronous cycle inconsistent [ 7.589422] firewire_ohci: Added fw-ohci device 0000:09:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x0 [ 7.859077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.861164] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133 [ 7.861170] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.863729] ata1.00: configured for UDMA/133 [ 7.879220] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5 [ 7.879389] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.879480] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.879567] sd 0:0:0:0: [sda] Write Protect is off [ 7.879573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.879627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.879931] sda: sda1 sda2 < sda5 > [ 7.938345] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.068832] firewire_core: created device fw0: GUID ffe473fffffffffe, S400 [ 8.077935] firewire_core: created device fw1: GUID 00804580112bc4b8, S100 [ 8.077941] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 8.090971] firewire_core: skipped bus generations, destroying all nodes [ 8.588178] firewire_core: rediscovered device fw0 [ 8.628143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.640929] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100 [ 8.656222] ata2.00: configured for UDMA/100 [ 8.670535] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5 [ 8.686834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.686839] Uniform CD-ROM driver Revision: 3.20 [ 8.686968] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.687031] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.038855] ata3: SATA link down (SStatus 0 SControl 300) [ 9.407224] ata4: SATA link down (SStatus 0 SControl 300) [ 9.779888] ata5: SATA link down (SStatus 0 SControl 300) [ 10.261803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.336349] Adding 11852796k swap on /dev/sda5. Priority:-1 extents:1 across:11852796k [ 18.430763] udev[514]: starting version 163 [ 18.439616] lp: driver loaded but no devices found [ 18.451867] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS [ 18.452242] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 18.608848] acpi device:48: registered as cooling_device8 [ 18.609343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input6 [ 18.609388] ACPI: Video Device [MXM3] (multi-head: yes rom: no post: no) [ 18.870991] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 19.100275] type=1400 audit(1300149877.496:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=678 comm="apparmor_parser" [ 19.100633] type=1400 audit(1300149877.496:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser" [ 19.100828] type=1400 audit(1300149877.496:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser" [ 19.157456] r8169 0000:07:00.0: eth0: link down [ 19.157830] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.287371] EDAC MC: Ver: 2.1.0 Feb 22 2011 [ 19.304523] cfg80211: Calling CRDA to update world regulatory domain [ 19.308610] nvidia: module license 'NVIDIA' taints kernel. [ 19.308613] Disabling lock debugging due to kernel taint [ 19.308626] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 19.309779] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.309787] jmb38x_ms 0000:09:00.3: setting latency timer to 64 [ 19.329597] cfg80211: World regulatory domain updated: [ 19.329599] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.329602] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.329605] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.329607] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.329609] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.329611] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.356230] Linux video capture interface: v2.00 [ 19.364467] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0343) [ 19.367023] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7 [ 19.367094] usbcore: registered new interface driver uvcvideo [ 19.367097] USB Video Class driver (v0.1.0) [ 19.393734] type=1400 audit(1300149877.786:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1122 comm="apparmor_parser" [ 19.394904] type=1400 audit(1300149877.786:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1116 comm="apparmor_parser" [ 19.394969] type=1400 audit(1300149877.786:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser" [ 19.395466] type=1400 audit(1300149877.786:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser" [ 19.395530] type=1400 audit(1300149877.786:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1120 comm="apparmor_parser" [ 19.395769] type=1400 audit(1300149877.786:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1116 comm="apparmor_parser" [ 19.413938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 19.413941] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 19.413992] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.414000] iwlagn 0000:03:00.0: setting latency timer to 64 [ 19.414046] iwlagn 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 [ 19.435222] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 19.435274] alloc irq_desc for 52 on node -1 [ 19.435276] alloc kstat_irqs on node -1 [ 19.435293] iwlagn 0000:03:00.0: irq 52 for MSI/MSI-X [ 19.448365] alloc irq_desc for 22 on node -1 [ 19.448367] alloc kstat_irqs on node -1 [ 19.448373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.448486] alloc irq_desc for 53 on node -1 [ 19.448488] alloc kstat_irqs on node -1 [ 19.448497] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 19.448517] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.493459] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 19.499857] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.676282] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.676288] nvidia 0000:02:00.0: setting latency timer to 64 [ 19.676292] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 19.676415] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010 [ 19.747338] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.773233] Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 2 [ 19.828348] ppdev: user-space parallel port driver [ 20.190409] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio4/input/input8 [ 21.237792] vboxdrv: Found 8 processor cores. [ 21.237839] VBoxDrv: dbg - g_abExecMemory=ffffffffa0de05e0 [ 21.238190] vboxdrv: fAsync=0 offMin=0x1bb offMax=0xbaf4 [ 21.238224] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.238226] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000). [ 23.375210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.530241] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 39.840376] firewire_core: giving up on config rom for node id ffc1 [ 39.840384] firewire_core: phy config: card 0, new root=ffc0, gap_count=5 [ 39.864710] firewire_core: skipped bus generations, destroying all nodes [ 40.363665] firewire_core: rediscovered device fw0 [ 40.459771] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 40.484001] firewire_core: skipped bus generations, destroying all nodes [ 40.979176] firewire_core: rediscovered device fw0 [ 40.990075] firewire_core: created device fw1: GUID 00804580112bc4b8, S100 [ 40.990080] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 41.013281] firewire_core: skipped bus generations, destroying all nodes [ 41.508513] firewire_core: rediscovered device fw0 [ 41.608378] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 41.628887] firewire_core: skipped bus generations, destroying all nodes [ 42.127785] firewire_core: rediscovered device fw0 [ 42.227641] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 42.251858] firewire_core: skipped bus generations, destroying all nodes [ 42.746973] firewire_core: rediscovered device fw0 [ 42.846850] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 42.868590] firewire_core: skipped bus generations, destroying all nodes [ 43.366305] firewire_core: rediscovered device fw0 [ 43.466171] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 43.490404] firewire_core: skipped bus generations, destroying all nodes [ 43.509859] firewire_core: giving up on config rom for node id ffc0 [ 43.985543] firewire_core: rediscovered device fw0 [ 44.085402] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 44.109636] firewire_core: skipped bus generations, destroying all nodes [ 44.604784] firewire_core: rediscovered device fw0 [ 44.614784] firewire_core: giving up on config rom for node id ffc0 [ 44.704648] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 44.728901] firewire_core: skipped bus generations, destroying all nodes [ 45.224039] firewire_core: rediscovered device fw0 [ 45.323910] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 45.348161] firewire_core: skipped bus generations, destroying all nodes [ 45.367636] firewire_core: giving up on config rom for node id ffc0 [ 45.843316] firewire_core: rediscovered device fw0 [ 45.851031] firewire_core: rediscovered device fw1 [ 45.857031] firewire_core: giving up on config rom for node id ffc0 [ 46.472533] firewire_core: giving up on config rom for node id ffc0 [ 47.091801] firewire_core: giving up on config rom for node id ffc0 [ 47.711022] firewire_core: giving up on config rom for node id ffc0 [ 48.330300] firewire_core: giving up on config rom for node id ffc0 [ 110.108578] wlan0: authenticate with 00:14:bf:46:34:dc (try 1) [ 110.111652] wlan0: authenticated [ 110.111696] wlan0: associate with 00:14:bf:46:34:dc (try 1) [ 110.114056] wlan0: RX AssocResp from 00:14:bf:46:34:dc (capab=0x411 status=0 aid=2) [ 110.114062] wlan0: associated [ 110.117318] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 111.147459] Intel AES-NI instructions are not detected. [ 111.230736] padlock: VIA PadLock not detected. [ 120.816438] wlan0: no IPv6 routers present reid@rsv-linux:~$ --=-H0TpOOwZvHqK8XHcE4Ms Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 7bit <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.30.3"> </HEAD> <BODY> On Sun, 2011-03-13 at 17:33 +0100, Stefan Richter wrote: <BLOCKQUOTE TYPE=CITE> <PRE> On Mar 13 Reid wrote: > I'm running Kino 1.3.4 on Ubuntu 10.10 and am having trouble importing > DV from my camcorder using firewire. > > My Panasonic camcorder is recognized and the capture starts but then > quits after a minute or two. Also, after that the camcorder is no longer > recognized. Like it's forgotten. Computer needs to be rebooted and > then is seen again. Plugging it out and in again does not help either? > I have looked around the 'Net and seen comments from uses that say to > start Kino as root, Never run application programs as root, it's too dangerous. > and to use the pads command to start Kino, but it > doesn't seem to make any difference with this issue, though that has > helped the sound recording issue. It's odd that his just popped up > because everything was working fine two months ago. Or so I thought. > > Happy to provide added spec info if needed. The output of "lspci -nn" would be good, also the output of "dmesg" from a session in which you captured something and connection breaks up as you described. </PRE> </BLOCKQUOTE> Stefan -<BR> <BR> Here's the output you suggested. It's a LOT. Thanks for helping. To me, this behaves like kernel bug. For example, firewire capture also fails in kdenlive. And yet, I don't believe it's hardware (though I guess it's possible) because everything worked just fine a few months ago. Of course I realize that hardware can just fail.... <BR> <BR> I do notice in CLI capture and AVC status error..whatever that might indicate....<BR> <BR> Anyway here the info.. <BR> <BR> And thanks.<BR> <BR> Reid<BR> <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ lspci -nn<BR> 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11)<BR> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)<BR> 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)<BR> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)<BR> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)<BR> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)<BR> 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)<BR> 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)<BR> 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)<BR> 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)<BR> 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)<BR> 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)<BR> 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)<BR> 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)<BR> 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)<BR> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)<BR> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 06)<BR> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06)<BR> 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)<BR> 02:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTX 285M] [10de:060f] (rev a2)<BR> 03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]<BR> 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)<BR> 09:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]<BR> 09:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382]<BR> 09:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381]<BR> 09:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383]<BR> ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04)<BR> ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)<BR> ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)<BR> ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)<BR> ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)<BR> ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)<BR> ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)<BR> ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)<BR> ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)<BR> ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)<BR> ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)<BR> ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)<BR> ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)<BR> ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)<BR> ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)<BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <BR> <BR> ________________________________________________________________________________________________________________________________________________________________<BR> <BR> <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ dmesg<BR> [ 0.000000] Initializing cgroup subsys cpuset<BR> [ 0.000000] Initializing cgroup subsys cpu<BR> [ 0.000000] Linux version 2.6.35-27-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11)<BR> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash<BR> [ 0.000000] BIOS-provided physical RAM map:<BR> <BR> <BR> |<BR> |<BR> |<BR> | Clipped out<BR> |<BR> |<BR> <BR> [ 2.177569] fuse init (API version 7.14)<BR> [ 2.177658] msgmni has been set to 7895<BR> [ 2.179739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)<BR> [ 2.179741] io scheduler noop registered<BR> [ 2.179743] io scheduler deadline registered<BR> [ 2.179780] io scheduler cfq registered (default)<BR> [ 2.179891] pcieport 0000:00:03.0: setting latency timer to 64<BR> [ 2.179916] alloc irq_desc for 45 on node -1<BR> [ 2.179918] alloc kstat_irqs on node -1<BR> [ 2.179926] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X<BR> [ 2.179984] pcieport 0000:00:1c.0: setting latency timer to 64<BR> [ 2.180013] alloc irq_desc for 46 on node -1<BR> [ 2.180017] alloc kstat_irqs on node -1<BR> [ 2.180024] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X<BR> [ 2.180086] pcieport 0000:00:1c.1: setting latency timer to 64<BR> [ 2.180115] alloc irq_desc for 47 on node -1<BR> [ 2.180117] alloc kstat_irqs on node -1<BR> [ 2.180124] pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X<BR> [ 2.180189] pcieport 0000:00:1c.3: setting latency timer to 64<BR> [ 2.180219] alloc irq_desc for 48 on node -1<BR> [ 2.180220] alloc kstat_irqs on node -1<BR> [ 2.180227] pcieport 0000:00:1c.3: irq 48 for MSI/MSI-X<BR> [ 2.180289] pcieport 0000:00:1c.4: setting latency timer to 64<BR> [ 2.180319] alloc irq_desc for 49 on node -1<BR> [ 2.180320] alloc kstat_irqs on node -1<BR> [ 2.180327] pcieport 0000:00:1c.4: irq 49 for MSI/MSI-X<BR> [ 2.180517] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180519] _OSC request data:1 0 1f <BR> [ 2.180523] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed<BR> [ 2.180543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5<BR> [ 2.180642] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180644] _OSC request data:1 0 1f <BR> [ 2.180753] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180755] _OSC request data:1 0 1f <BR> [ 2.180863] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180864] _OSC request data:1 0 1f <BR> [ 2.180972] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180974] _OSC request data:1 0 1f <BR> [ 2.181095] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181097] _OSC request data:1 0 1f <BR> [ 2.181204] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181206] _OSC request data:1 0 1f <BR> [ 2.181313] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181315] _OSC request data:1 0 1f <BR> [ 2.181422] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181423] _OSC request data:1 0 1f <BR> [ 2.181445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4<BR> [ 2.181514] intel_idle: MWAIT substates: 0x1120<BR> [ 2.181516] intel_idle: v0.4 model 0x1E<BR> [ 2.181517] intel_idle: lapic_timer_reliable_states 0x2<BR> [ 2.215821] ACPI: AC Adapter [AC] (on-line)<BR> [ 2.215897] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0<BR> [ 2.215904] ACPI: Power Button [PWRB]<BR> [ 2.215937] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1<BR> [ 2.215941] ACPI: Sleep Button [SLPB]<BR> [ 2.215975] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2<BR> [ 2.285709] ACPI: Lid Switch [LID0]<BR> [ 2.285753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3<BR> [ 2.285757] ACPI: Power Button [PWRF]<BR> [ 2.286414] ACPI: acpi_idle yielding to intel_idle<BR> [ 4.962489] thermal LNXTHERM:01: registered as thermal_zone0<BR> [ 4.962499] ACPI: Thermal Zone [TZ0] (52 C)<BR> [ 4.962564] ERST: Table is not found!<BR> [ 5.002577] Linux agpgart interface v0.103<BR> [ 5.002597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled<BR> [ 5.003761] brd: module loaded<BR> [ 5.004191] loop: module loaded<BR> [ 5.004583] Fixed MDIO Bus: probed<BR> [ 5.004609] PPP generic driver version 2.4.2<BR> [ 5.004638] tun: Universal TUN/TAP device driver, 1.6<BR> [ 5.004640] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><BR> [ 5.004703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<BR> [ 5.004722] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 5.004739] ehci_hcd 0000:00:1a.0: setting latency timer to 64<BR> [ 5.004742] ehci_hcd 0000:00:1a.0: EHCI Host Controller<BR> [ 5.004772] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1<BR> [ 5.004798] ehci_hcd 0000:00:1a.0: debug port 2<BR> [ 5.008717] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported<BR> [ 5.008732] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0e06000<BR> [ 5.024218] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00<BR> [ 5.024343] hub 1-0:1.0: USB hub found<BR> [ 5.024347] hub 1-0:1.0: 3 ports detected<BR> [ 5.024407] alloc irq_desc for 23 on node -1<BR> [ 5.024409] alloc kstat_irqs on node -1<BR> [ 5.024414] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23<BR> [ 5.024427] ehci_hcd 0000:00:1d.0: setting latency timer to 64<BR> [ 5.024430] ehci_hcd 0000:00:1d.0: EHCI Host Controller<BR> [ 5.024462] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2<BR> [ 5.024485] ehci_hcd 0000:00:1d.0: debug port 2<BR> [ 5.028419] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported<BR> [ 5.028432] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0e06400<BR> [ 5.044194] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00<BR> [ 5.044310] hub 2-0:1.0: USB hub found<BR> [ 5.044314] hub 2-0:1.0: 3 ports detected<BR> [ 5.044374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<BR> [ 5.044386] uhci_hcd: USB Universal Host Controller Interface driver<BR> [ 5.044473] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12<BR> [ 5.048199] i8042.c: Detected active multiplexing controller, rev 1.1.<BR> [ 5.050663] serio: i8042 KBD port at 0x60,0x64 irq 1<BR> [ 5.050669] serio: i8042 AUX0 port at 0x60,0x64 irq 12<BR> [ 5.050671] serio: i8042 AUX1 port at 0x60,0x64 irq 12<BR> [ 5.050674] serio: i8042 AUX2 port at 0x60,0x64 irq 12<BR> [ 5.050677] serio: i8042 AUX3 port at 0x60,0x64 irq 12<BR> [ 5.050731] mice: PS/2 mouse device common for all mice<BR> [ 5.050869] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0<BR> [ 5.050894] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs<BR> [ 5.050980] device-mapper: uevent: version 1.0.3<BR> [ 5.051049] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]<BR> [ 5.051190] device-mapper: multipath: version 1.1.1 loaded<BR> [ 5.051192] device-mapper: multipath round-robin: version 1.0.0 loaded<BR> [ 5.051663] cpuidle: using governor ladder<BR> [ 5.051951] cpuidle: using governor menu<BR> [ 5.052201] TCP cubic registered<BR> [ 5.052316] NET: Registered protocol family 10<BR> [ 5.052845] lo: Disabled Privacy Extensions<BR> [ 5.053161] NET: Registered protocol family 17<BR> [ 5.088241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4<BR> [ 5.342085] usb 1-1: new high speed USB device using ehci_hcd and address 2<BR> [ 5.492734] hub 1-1:1.0: USB hub found<BR> [ 5.492937] hub 1-1:1.0: 6 ports detected<BR> [ 5.611747] usb 2-1: new high speed USB device using ehci_hcd and address 2<BR> [ 5.763501] hub 2-1:1.0: USB hub found<BR> [ 5.763720] hub 2-1:1.0: 8 ports detected<BR> [ 5.841735] usb 1-1.1: new high speed USB device using ehci_hcd and address 3<BR> [ 6.114587] PM: Resume from disk failed.<BR> [ 6.114592] registered taskstats version 1<BR> [ 6.114890] Magic number: 3:787:708<BR> [ 6.115045] rtc_cmos 00:06: setting system clock to 2011-03-15 00:44:24 UTC (1300149864)<BR> [ 6.115050] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found<BR> [ 6.115053] EDD information not available.<BR> [ 6.115135] Freeing unused kernel memory: 912k freed<BR> [ 6.115261] Write protecting the kernel read-only data: 10240k<BR> [ 6.115503] Freeing unused kernel memory: 408k freed<BR> [ 6.115781] Freeing unused kernel memory: 1644k freed<BR> [ 6.131219] udev[147]: starting version 163<BR> [ 6.192431] usb 1-1.3: new full speed USB device using ehci_hcd and address 4<BR> [ 6.371075] usb 2-1.4: new low speed USB device using ehci_hcd and address 3<BR> [ 6.497621] usbcore: registered new interface driver hiddev<BR> [ 6.500435] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5<BR> [ 6.500489] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0<BR> [ 6.502774] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1<BR> [ 6.502800] usbcore: registered new interface driver usbhid<BR> [ 6.502803] usbhid: USB HID core driver<BR> [ 6.730813] ACPI: Battery Slot [BAT] (battery present)<BR> [ 7.420989] ahci 0000:00:1f.2: version 3.0<BR> [ 7.421006] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19<BR> [ 7.421062] alloc irq_desc for 50 on node -1<BR> [ 7.421065] alloc kstat_irqs on node -1<BR> [ 7.421077] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X<BR> [ 7.421113] ahci: SSS flag set, parallel bus scan disabled<BR> [ 7.423493] sdhci: Secure Digital Host Controller Interface driver<BR> [ 7.423497] sdhci: Copyright(c) Pierre Ossman<BR> [ 7.425733] sdhci-pci 0000:09:00.1: SDHCI controller found [197b:2382] (rev 0)<BR> [ 7.425754] sdhci-pci 0000:09:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.425837] sdhci-pci 0000:09:00.1: setting latency timer to 64<BR> [ 7.425876] Registered led device: mmc0::<BR> [ 7.425913] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA<BR> [ 7.425927] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 0)<BR> [ 7.425946] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.425954] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.<BR> [ 7.425962] sdhci-pci 0000:09:00.2: PCI INT A disabled<BR> [ 7.432588] firewire_ohci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.432596] firewire_ohci 0000:09:00.0: setting latency timer to 64<BR> [ 7.432916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded<BR> [ 7.432933] r8169 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19<BR> [ 7.432979] r8169 0000:07:00.0: setting latency timer to 64<BR> [ 7.433024] alloc irq_desc for 51 on node -1<BR> [ 7.433027] alloc kstat_irqs on node -1<BR> [ 7.433040] r8169 0000:07:00.0: irq 51 for MSI/MSI-X<BR> [ 7.433421] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc90000678000, 00:90:f5:9f:c4:46, XID 081000c0 IRQ 51<BR> [ 7.433958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode<BR> [ 7.433964] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst <BR> [ 7.433967] ahci 0000:00:1f.2: setting latency timer to 64<BR> [ 7.514200] scsi0 : ahci<BR> [ 7.514560] scsi1 : ahci<BR> [ 7.514814] scsi2 : ahci<BR> [ 7.515071] scsi3 : ahci<BR> [ 7.515289] scsi4 : ahci<BR> [ 7.515507] scsi5 : ahci<BR> [ 7.515603] ata1: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05100 irq 50<BR> [ 7.515608] ata2: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05180 irq 50<BR> [ 7.515613] ata3: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05200 irq 50<BR> [ 7.515617] ata4: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05280 irq 50<BR> [ 7.515622] ata5: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05300 irq 50<BR> [ 7.515625] ata6: DUMMY<BR> [ 7.574237] firewire_ohci: isochronous cycle inconsistent<BR> [ 7.589422] firewire_ohci: Added fw-ohci device 0000:09:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x0<BR> [ 7.859077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)<BR> [ 7.861164] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133<BR> [ 7.861170] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)<BR> [ 7.863729] ata1.00: configured for UDMA/133<BR> [ 7.879220] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5<BR> [ 7.879389] sd 0:0:0:0: Attached scsi generic sg0 type 0<BR> [ 7.879480] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)<BR> [ 7.879567] sd 0:0:0:0: [sda] Write Protect is off<BR> [ 7.879573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<BR> [ 7.879627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA<BR> [ 7.879931] sda: sda1 sda2 < sda5 ><BR> [ 7.938345] sd 0:0:0:0: [sda] Attached SCSI disk<BR> [ 8.068832] firewire_core: created device fw0: GUID ffe473fffffffffe, S400<BR> [ 8.077935] firewire_core: created device fw1: GUID 00804580112bc4b8, S100<BR> [ 8.077941] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 8.090971] firewire_core: skipped bus generations, destroying all nodes<BR> [ 8.588178] firewire_core: rediscovered device fw0<BR> [ 8.628143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<BR> [ 8.640929] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100<BR> [ 8.656222] ata2.00: configured for UDMA/100<BR> [ 8.670535] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5<BR> [ 8.686834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<BR> [ 8.686839] Uniform CD-ROM driver Revision: 3.20<BR> [ 8.686968] sr 1:0:0:0: Attached scsi CD-ROM sr0<BR> [ 8.687031] sr 1:0:0:0: Attached scsi generic sg1 type 5<BR> [ 9.038855] ata3: SATA link down (SStatus 0 SControl 300)<BR> [ 9.407224] ata4: SATA link down (SStatus 0 SControl 300)<BR> [ 9.779888] ata5: SATA link down (SStatus 0 SControl 300)<BR> [ 10.261803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)<BR> [ 18.336349] Adding 11852796k swap on /dev/sda5. Priority:-1 extents:1 across:11852796k <BR> [ 18.430763] udev[514]: starting version 163<BR> [ 18.439616] lp: driver loaded but no devices found<BR> [ 18.451867] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS<BR> [ 18.452242] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function<BR> [ 18.608848] acpi device:48: registered as cooling_device8<BR> [ 18.609343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input6<BR> [ 18.609388] ACPI: Video Device [MXM3] (multi-head: yes rom: no post: no)<BR> [ 18.870991] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro<BR> [ 19.100275] type=1400 audit(1300149877.496:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=678 comm="apparmor_parser"<BR> [ 19.100633] type=1400 audit(1300149877.496:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"<BR> [ 19.100828] type=1400 audit(1300149877.496:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"<BR> [ 19.157456] r8169 0000:07:00.0: eth0: link down<BR> [ 19.157830] ADDRCONF(NETDEV_UP): eth0: link is not ready<BR> [ 19.287371] EDAC MC: Ver: 2.1.0 Feb 22 2011<BR> [ 19.304523] cfg80211: Calling CRDA to update world regulatory domain<BR> [ 19.308610] nvidia: module license 'NVIDIA' taints kernel.<BR> [ 19.308613] Disabling lock debugging due to kernel taint<BR> [ 19.308626] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50<BR> [ 19.309779] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.309787] jmb38x_ms 0000:09:00.3: setting latency timer to 64<BR> [ 19.329597] cfg80211: World regulatory domain updated:<BR> [ 19.329599] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)<BR> [ 19.329602] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329605] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329607] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329609] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329611] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.356230] Linux video capture interface: v2.00<BR> [ 19.364467] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0343)<BR> [ 19.367023] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7<BR> [ 19.367094] usbcore: registered new interface driver uvcvideo<BR> [ 19.367097] USB Video Class driver (v0.1.0)<BR> [ 19.393734] type=1400 audit(1300149877.786:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1122 comm="apparmor_parser"<BR> [ 19.394904] type=1400 audit(1300149877.786:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1116 comm="apparmor_parser"<BR> [ 19.394969] type=1400 audit(1300149877.786:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser"<BR> [ 19.395466] type=1400 audit(1300149877.786:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser"<BR> [ 19.395530] type=1400 audit(1300149877.786:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1120 comm="apparmor_parser"<BR> [ 19.395769] type=1400 audit(1300149877.786:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1116 comm="apparmor_parser"<BR> [ 19.413938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:<BR> [ 19.413941] iwlagn: Copyright(c) 2003-2010 Intel Corporation<BR> [ 19.413992] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.414000] iwlagn 0000:03:00.0: setting latency timer to 64<BR> [ 19.414046] iwlagn 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24<BR> [ 19.435222] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels<BR> [ 19.435274] alloc irq_desc for 52 on node -1<BR> [ 19.435276] alloc kstat_irqs on node -1<BR> [ 19.435293] iwlagn 0000:03:00.0: irq 52 for MSI/MSI-X<BR> [ 19.448365] alloc irq_desc for 22 on node -1<BR> [ 19.448367] alloc kstat_irqs on node -1<BR> [ 19.448373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22<BR> [ 19.448486] alloc irq_desc for 53 on node -1<BR> [ 19.448488] alloc kstat_irqs on node -1<BR> [ 19.448497] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X<BR> [ 19.448517] HDA Intel 0000:00:1b.0: setting latency timer to 64<BR> [ 19.493459] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12<BR> [ 19.499857] phy0: Selected rate control algorithm 'iwl-agn-rs'<BR> [ 19.676282] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.676288] nvidia 0000:02:00.0: setting latency timer to 64<BR> [ 19.676292] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem<BR> [ 19.676415] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010<BR> [ 19.747338] ADDRCONF(NETDEV_UP): wlan0: link is not ready<BR> [ 19.773233] Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 2<BR> [ 19.828348] ppdev: user-space parallel port driver<BR> [ 20.190409] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio4/input/input8<BR> [ 21.237792] vboxdrv: Found 8 processor cores.<BR> [ 21.237839] VBoxDrv: dbg - g_abExecMemory=ffffffffa0de05e0<BR> [ 21.238190] vboxdrv: fAsync=0 offMin=0x1bb offMax=0xbaf4<BR> [ 21.238224] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.<BR> [ 21.238226] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).<BR> [ 23.375210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0<BR> [ 25.530241] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0<BR> [ 39.840376] firewire_core: giving up on config rom for node id ffc1<BR> [ 39.840384] firewire_core: phy config: card 0, new root=ffc0, gap_count=5<BR> [ 39.864710] firewire_core: skipped bus generations, destroying all nodes<BR> [ 40.363665] firewire_core: rediscovered device fw0<BR> [ 40.459771] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 40.484001] firewire_core: skipped bus generations, destroying all nodes<BR> [ 40.979176] firewire_core: rediscovered device fw0<BR> [ 40.990075] firewire_core: created device fw1: GUID 00804580112bc4b8, S100<BR> [ 40.990080] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 41.013281] firewire_core: skipped bus generations, destroying all nodes<BR> [ 41.508513] firewire_core: rediscovered device fw0<BR> [ 41.608378] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 41.628887] firewire_core: skipped bus generations, destroying all nodes<BR> [ 42.127785] firewire_core: rediscovered device fw0<BR> [ 42.227641] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 42.251858] firewire_core: skipped bus generations, destroying all nodes<BR> [ 42.746973] firewire_core: rediscovered device fw0<BR> [ 42.846850] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 42.868590] firewire_core: skipped bus generations, destroying all nodes<BR> [ 43.366305] firewire_core: rediscovered device fw0<BR> [ 43.466171] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 43.490404] firewire_core: skipped bus generations, destroying all nodes<BR> [ 43.509859] firewire_core: giving up on config rom for node id ffc0<BR> [ 43.985543] firewire_core: rediscovered device fw0<BR> [ 44.085402] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 44.109636] firewire_core: skipped bus generations, destroying all nodes<BR> [ 44.604784] firewire_core: rediscovered device fw0<BR> [ 44.614784] firewire_core: giving up on config rom for node id ffc0<BR> [ 44.704648] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 44.728901] firewire_core: skipped bus generations, destroying all nodes<BR> [ 45.224039] firewire_core: rediscovered device fw0<BR> [ 45.323910] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 45.348161] firewire_core: skipped bus generations, destroying all nodes<BR> [ 45.367636] firewire_core: giving up on config rom for node id ffc0<BR> [ 45.843316] firewire_core: rediscovered device fw0<BR> [ 45.851031] firewire_core: rediscovered device fw1<BR> [ 45.857031] firewire_core: giving up on config rom for node id ffc0<BR> [ 46.472533] firewire_core: giving up on config rom for node id ffc0<BR> [ 47.091801] firewire_core: giving up on config rom for node id ffc0<BR> [ 47.711022] firewire_core: giving up on config rom for node id ffc0<BR> [ 48.330300] firewire_core: giving up on config rom for node id ffc0<BR> [ 110.108578] wlan0: authenticate with 00:14:bf:46:34:dc (try 1)<BR> [ 110.111652] wlan0: authenticated<BR> [ 110.111696] wlan0: associate with 00:14:bf:46:34:dc (try 1)<BR> [ 110.114056] wlan0: RX AssocResp from 00:14:bf:46:34:dc (capab=0x411 status=0 aid=2)<BR> [ 110.114062] wlan0: associated<BR> [ 110.117318] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<BR> [ 111.147459] Intel AES-NI instructions are not detected.<BR> [ 111.230736] padlock: VIA PadLock not detected.<BR> [ 120.816438] wlan0: no IPv6 routers present<BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <BR> <BR> <BR> <BR> </BODY> </HTML> --=-H0TpOOwZvHqK8XHcE4Ms-- --===============0603227165031000723== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d --===============0603227165031000723== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Kino-dev mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kino-dev --===============0603227165031000723==--