Re: Firewire quits
Reid <[email protected]> Mon, 14 Mar 2011 21:04:34 -0400
| Newsgroups | gmane.comp.video.kino.devel |
|---|---|
| Message-ID | <1300151074.2443.7.camel@rsv-linux> |
--===============3456009896198750014== Content-Type: multipart/alternative; boundary="=-xdVI6roPTa8PGoOza9uz" --=-xdVI6roPTa8PGoOza9uz Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit On Sun, 2011-03-13 at 17:33 +0100, Stefan Richter wrote: > On Mar 13 Reid wrote: > > I'm running Kino 1.3.4 on Ubuntu 10.10 and am having trouble importing > > DV from my camcorder using firewire. > > > > My Panasonic camcorder is recognized and the capture starts but then > > quits after a minute or two. Also, after that the camcorder is no longer > > recognized. Like it's forgotten. Computer needs to be rebooted and > > then is seen again. > > Plugging it out and in again does not help either? > > > I have looked around the 'Net and seen comments from uses that say to > > start Kino as root, > > Never run application programs as root, it's too dangerous. > > > and to use the pads command to start Kino, but it > > doesn't seem to make any difference with this issue, though that has > > helped the sound recording issue. It's odd that his just popped up > > because everything was working fine two months ago. Or so I thought. > > > > Happy to provide added spec info if needed. > > The output of "lspci -nn" would be good, also the output of "dmesg" from a > session in which you captured something and connection breaks up as you > described. Stefan - Here's the output you suggested. It's a LOT. Thanks for helping. To me, this behaves like kernel bug. For example, firewire capture also fails in kdenlive. And yet, I don't believe it's hardware (though I guess it's possible) because everything worked just fine a few months ago. Of course I realize that hardware can just fail.... I do notice in CLI capture and AVC status error..whatever that might indicate.... Anyway here the info.. And thanks. Reid reid@rsv-linux:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11) 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 06) 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) 02:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTX 285M] [10de:060f] (rev a2) 03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235] 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) 09:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] 09:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] 09:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] 09:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04) ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04) ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04) ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04) ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04) ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04) ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04) ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04) ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04) ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04) ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04) ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04) ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04) ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04) ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04) reid@rsv-linux:~$ reid@rsv-linux:~$ padsp kino > help language code en > Kino Common being built > Creating page editor > Creating Capture Page > Creating Export Page > Creating Export1394 Page > Creating ExportAVI Page > Creating ExportStills Page > Creating ExportAudio Page > Creating ExportMJPEG Page /usr/share/kino/scripts/dvdauthor/dvdauthor.sh /usr/share/kino/scripts/dvdauthor/dvdauthor-brasero.sh /usr/share/kino/scripts/dvdauthor/qdvdauthor.sh /usr/share/kino/scripts/dvdauthor/growisofs.sh /usr/share/kino/scripts/dvdauthor/none.sh /usr/share/kino/scripts/dvdauthor/dvdauthor-k3b.sh > Initializing MJPEG Export Page settings from Preferences > Creating ExportPipe Page /usr/share/kino/scripts/exports/ffmpeg_mp4.sh /usr/share/kino/scripts/exports/ffmpeg_mov.sh /usr/share/kino/scripts/exports/ffmpeg_dvd.sh /usr/share/kino/scripts/exports/ffmpeg_vcd.sh /usr/share/kino/scripts/exports/gstreamer_utils.sh /usr/share/kino/scripts/exports/gstreamer_theora.sh /usr/share/kino/scripts/exports/ffmpeg_dvd_dual.sh /usr/share/kino/scripts/exports/ffmpeg_utils.sh /usr/share/kino/scripts/exports/ffmpeg_divx_dual.sh /usr/share/kino/scripts/exports/ffmpeg_h264_ps3.sh /usr/share/kino/scripts/exports/ffmpeg_3gp.sh /usr/share/kino/scripts/exports/ffmpeg_h264.sh /usr/share/kino/scripts/exports/ffmpeg_mp4_dual.sh /usr/share/kino/scripts/exports/ffmpeg_huffyuv.sh /usr/share/kino/scripts/exports/ffmpeg_mp3.sh /usr/share/kino/scripts/exports/ffmpeg_xvid_dual.sh /usr/share/kino/scripts/exports/ffmpeg_divx.sh /usr/share/kino/scripts/exports/ffmpeg2theora.sh /usr/share/kino/scripts/exports/ffmpeg2dirac.sh /usr/share/kino/scripts/exports/rawplay.sh /usr/share/kino/scripts/exports/extract_chapters /usr/share/kino/scripts/exports/mencoder.sh /usr/share/kino/scripts/exports/ffmpeg_flv.sh /usr/share/kino/scripts/exports/ffmpeg_h264_dual.sh /usr/share/kino/scripts/exports/ffmpeg_xvid.sh > Creating page trim >>> Image Create: Colour Range >>> Image Create: Fixed Colour >>> Image Create: From File >>> Image Create: Gradient >>> Image Create: Random noise >>> Image Filter: No Change >>> Image Filter: Black & White >>> Image Filter: Kaleidoscope >>> Image Filter: Fade In >>> Image Filter: Fade Out >>> Image Filter: Flip >>> Image Filter: Mirror >>> Image Filter: Reverse Video >>> Image Filter: Sepia >>> Image Transition: Dissolve >>> Image Transition: Barn Door Wipe >>> Image Transition: Differences >>> Image Transition: No Change >>> Image Transition: Push Wipe >>> Image Transition: Switch >>> Audio Filter: No Change >>> Audio Filter: Dub >>> Audio Filter: Fade In >>> Audio Filter: Fade Out >>> Audio Filter: Gain >>> Audio Filter: Mix >>> Audio Filter: Silence >>> Audio Transition: Cross Fade >>> Audio Transition: No Change > Creating Magick Page >> Searching /usr/lib/kino-gtk2 for plugins >>> Registering plugin /usr/lib/kino-gtk2/libdvtitler.so >>> Registering plugin /usr/lib/kino-gtk2/libtimfx.so >>> Registering plugin /usr/lib/kino-gtk2/libkinoplus.so >>> Image Filter: Superimpose >>> Image Filter: Titler >>> Image Filter: Blur >>> Image Filter: Colour Hold >>> Image Filter: Soft Focus >>> Image Transition: Luma Wipe >>> Image Filter: Colour Average >>> Image Filter: Charcoal >>> Image Filter: Jerky >>> Image Filter: Levels >>> Image Filter: Pan and Zoom >>> Image Filter: Pixelate >>> Image Transition: Composite >>> Image Transition: Blue Chroma Key >>> Image Transition: Green Chroma Key >> Creating undo/redo buffer > setting video preview size to 427x240 >> Starting Editor >> Kino Common newFile >>> Received playlist to store at position 0 >>>> Adding to end >> Leaving Editor >> Left Editor >> Starting Capture >> AV/C Enabled >>> Using iec61883 capture rom1394_0 warning: read failed: 0x0000fffff0000414 >>> iec61883Reader::StartThread on port 0 >>> AVC enabled >> Constructing File Capture tracker rom1394_0 warning: read failed: 0x0000fffff0000414 >> Leaving Capture >> Starting Capture >>> Using iec61883 capture rom1394_0 warning: read failed: 0x0000fffff0000414 >>> iec61883Reader::StartThread on port 0 >>> AVC enabled >>> Trying /home/reid/Video1/Christmas '10 & Lunar New Year '11/CAC Dances-four001.dv >>>> Registering /home/reid/Video1/Christmas '10 & Lunar New Year '11/CAC Dances-four001.dv with the tracker >> Trying XVideo at 720x480 >>> XvQueryAdaptors count: 1 >>> Xv: NV17 Video Texture: ports 310 - 341 >>> formats supported: 4 >>> 0x32595559 (YUY2) packed >>> 0x32315659 (YV12) planar >>> 0x59565955 (UYVY) packed >>> 0x30323449 (I420) planar >>> 0: XV_IMAGE, 8192x8192 rate = 1/1 send oops send oops send oops >>> AVC status error send oops send oops send oops >>> AVC status error send oops send oops send oops send oops send oops send oops send oops Killed ________________________________________________________________________________________________________________________________________________________________ reid@rsv-linux:~$ reid@rsv-linux:~$ reid@rsv-linux:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-27-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c727c000 (usable) [ 0.000000] BIOS-e820: 00000000c727c000 - 00000000c7282000 (reserved) [ 0.000000] BIOS-e820: 00000000c7282000 - 00000000c73ea000 (usable) [ 0.000000] BIOS-e820: 00000000c73ea000 - 00000000c740f000 (reserved) [ 0.000000] BIOS-e820: 00000000c740f000 - 00000000c746f000 (usable) [ 0.000000] BIOS-e820: 00000000c746f000 - 00000000c7470000 (reserved) [ 0.000000] BIOS-e820: 00000000c7470000 - 00000000c74f1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c74f1000 - 00000000c770f000 (reserved) [ 0.000000] BIOS-e820: 00000000c770f000 - 00000000c7717000 (usable) [ 0.000000] BIOS-e820: 00000000c7717000 - 00000000c771f000 (reserved) [ 0.000000] BIOS-e820: 00000000c771f000 - 00000000c7782000 (usable) [ 0.000000] BIOS-e820: 00000000c7782000 - 00000000c779f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c779f000 - 00000000c77e3000 (usable) [ 0.000000] BIOS-e820: 00000000c77e3000 - 00000000c77ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c77ff000 - 00000000c7800000 (usable) [ 0.000000] BIOS-e820: 00000000c7800000 - 00000000c8000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0e04000 - 00000000f0e05000 (reserved) [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back [ 0.000000] 4 base 100000000 mask FE0000000 write-back [ 0.000000] 5 base 120000000 mask FF0000000 write-back [ 0.000000] 6 base 130000000 mask FF8000000 write-back [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7800 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c727c000 (usable) [ 0.000000] modified: 00000000c727c000 - 00000000c7282000 (reserved) [ 0.000000] modified: 00000000c7282000 - 00000000c73ea000 (usable) [ 0.000000] modified: 00000000c73ea000 - 00000000c740f000 (reserved) [ 0.000000] modified: 00000000c740f000 - 00000000c746f000 (usable) [ 0.000000] modified: 00000000c746f000 - 00000000c7470000 (reserved) [ 0.000000] modified: 00000000c7470000 - 00000000c74f1000 (ACPI NVS) [ 0.000000] modified: 00000000c74f1000 - 00000000c770f000 (reserved) [ 0.000000] modified: 00000000c770f000 - 00000000c7717000 (usable) [ 0.000000] modified: 00000000c7717000 - 00000000c771f000 (reserved) [ 0.000000] modified: 00000000c771f000 - 00000000c7782000 (usable) [ 0.000000] modified: 00000000c7782000 - 00000000c779f000 (ACPI NVS) [ 0.000000] modified: 00000000c779f000 - 00000000c77e3000 (usable) [ 0.000000] modified: 00000000c77e3000 - 00000000c77ff000 (ACPI data) [ 0.000000] modified: 00000000c77ff000 - 00000000c7800000 (usable) [ 0.000000] modified: 00000000c7800000 - 00000000c8000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000f0e04000 - 00000000f0e05000 (reserved) [ 0.000000] modified: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f6850] f6850 [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7800000 [ 0.000000] 0000000000 - 00c7800000 page 2M [ 0.000000] kernel direct mapping tables up to c7800000 @ 16000-1b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000 [ 0.000000] 0100000000 - 0138000000 page 2M [ 0.000000] kernel direct mapping tables up to 138000000 @ 19000-1f000 [ 0.000000] RAMDISK: 37571000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6790 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000c77f5102 00054 (v01 MSTEST TESTONLY 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000c77e5000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: DSDT 00000000c77e6000 0994C (v02 Intel CALPELLA 06040000 INTL 20060912) [ 0.000000] ACPI: FACS 00000000c779bfc0 00040 [ 0.000000] ACPI: HPET 00000000c77fec42 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: MCFG 00000000c77fec7a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: APIC 00000000c77fecb6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: SLIC 00000000c77fed72 00176 (v01 MSTEST TESTONLY 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000c77e4000 009F7 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000138000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00138000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000c727c [ 0.000000] 0: 0x000c7282 -> 0x000c73ea [ 0.000000] 0: 0x000c740f -> 0x000c746f [ 0.000000] 0: 0x000c770f -> 0x000c7717 [ 0.000000] 0: 0x000c771f -> 0x000c7782 [ 0.000000] 0: 0x000c779f -> 0x000c77e3 [ 0.000000] 0: 0x000c77ff -> 0x000c7800 [ 0.000000] 0: 0x00100000 -> 0x00138000 [ 0.000000] On node 0 totalpages: 1045632 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3924 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 797996 pages, LIFO batch:31 [ 0.000000] Normal zone: 3136 pages used for memmap [ 0.000000] Normal zone: 226240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff] [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000 [ 0.000000] early_res array is doubled to 128 at [1a800 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 00000000c73ea000 - 00000000c740f000 [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000 [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000 [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000 [ 0.000000] PM: Registered nosave memory: 00000000c7717000 - 00000000c771f000 [ 0.000000] PM: Registered nosave memory: 00000000c7782000 - 00000000c779f000 [ 0.000000] PM: Registered nosave memory: 00000000c77e3000 - 00000000c77ff000 [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000 [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f0e04000 [ 0.000000] PM: Registered nosave memory: 00000000f0e04000 - 00000000f0e05000 [ 0.000000] PM: Registered nosave memory: 00000000f0e05000 - 00000000feaff000 [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028160 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (84 early reservations) [ 0.000000] #1 [0001000000 - 0001d18114] TEXT DATA BSS [ 0.000000] #2 [0037571000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d19000 - 0001d191e4] BRK [ 0.000000] #4 [00000f6860 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f6850 - 00000f6860] MP-table mpf [ 0.000000] #6 [000009c400 - 000009c971] BIOS reserved [ 0.000000] #7 [000009cb35 - 00000f6850] BIOS reserved [ 0.000000] #8 [000009c971 - 000009cb35] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000019000] PGTABLE [ 0.000000] #12 [0000019000 - 000001a000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d19200 - 0001d1a200] BOOTMEM [ 0.000000] #15 [0001d18140 - 0001d18440] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001d18440 - 0001d185c0] BOOTMEM [ 0.000000] #20 [0001d1a200 - 0001d32200] BOOTMEM [ 0.000000] #21 [0001d32200 - 0001d38200] BOOTMEM [ 0.000000] #22 [0001d39000 - 0001d3a000] BOOTMEM [ 0.000000] #23 [0001d185c0 - 0001d18601] BOOTMEM [ 0.000000] #24 [0001d18640 - 0001d18683] BOOTMEM [ 0.000000] #25 [0001d186c0 - 0001d18d18] BOOTMEM [ 0.000000] #26 [0001d18d40 - 0001d18da8] BOOTMEM [ 0.000000] #27 [0001d18dc0 - 0001d18e28] BOOTMEM [ 0.000000] #28 [0001d18e40 - 0001d18ea8] BOOTMEM [ 0.000000] #29 [0001d18ec0 - 0001d18f28] BOOTMEM [ 0.000000] #30 [0001d18f40 - 0001d18fa8] BOOTMEM [ 0.000000] #31 [0001d38200 - 0001d38268] BOOTMEM [ 0.000000] #32 [0001d38280 - 0001d382e8] BOOTMEM [ 0.000000] #33 [0001d38300 - 0001d38368] BOOTMEM [ 0.000000] #34 [0001d38380 - 0001d383e8] BOOTMEM [ 0.000000] #35 [0001d38400 - 0001d38468] BOOTMEM [ 0.000000] #36 [0001d38480 - 0001d384e8] BOOTMEM [ 0.000000] #37 [0001d38500 - 0001d38568] BOOTMEM [ 0.000000] #38 [0001d38580 - 0001d385e8] BOOTMEM [ 0.000000] #39 [0001d38600 - 0001d38668] BOOTMEM [ 0.000000] #40 [0001d38680 - 0001d386e8] BOOTMEM [ 0.000000] #41 [0001d38700 - 0001d38768] BOOTMEM [ 0.000000] #42 [0001d38780 - 0001d387e8] BOOTMEM [ 0.000000] #43 [0001d38800 - 0001d38868] BOOTMEM [ 0.000000] #44 [0001d38880 - 0001d388e8] BOOTMEM [ 0.000000] #45 [0001d38900 - 0001d38968] BOOTMEM [ 0.000000] #46 [0001d38980 - 0001d389e8] BOOTMEM [ 0.000000] #47 [0001d38a00 - 0001d38a68] BOOTMEM [ 0.000000] #48 [0001d38a80 - 0001d38ae8] BOOTMEM [ 0.000000] #49 [0001d38b00 - 0001d38b68] BOOTMEM [ 0.000000] #50 [0001d38b80 - 0001d38be8] BOOTMEM [ 0.000000] #51 [0001d38c00 - 0001d38c68] BOOTMEM [ 0.000000] #52 [0001d38c80 - 0001d38ce8] BOOTMEM [ 0.000000] #53 [0001d38d00 - 0001d38d68] BOOTMEM [ 0.000000] #54 [0001d18fc0 - 0001d18fe0] BOOTMEM [ 0.000000] #55 [0001d38d80 - 0001d38da0] BOOTMEM [ 0.000000] #56 [0001d38dc0 - 0001d38de0] BOOTMEM [ 0.000000] #57 [0001d38e00 - 0001d38e20] BOOTMEM [ 0.000000] #58 [0001d38e40 - 0001d38e60] BOOTMEM [ 0.000000] #59 [0001d38e80 - 0001d38ea0] BOOTMEM [ 0.000000] #60 [0001d38ec0 - 0001d38ee0] BOOTMEM [ 0.000000] #61 [0001d38f00 - 0001d38f20] BOOTMEM [ 0.000000] #62 [0001d38f40 - 0001d38faa] BOOTMEM [ 0.000000] #63 [0001d3a000 - 0001d3a06a] BOOTMEM [ 0.000000] #64 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #65 [0001e40000 - 0001e5e000] BOOTMEM [ 0.000000] #66 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #67 [0001ec0000 - 0001ede000] BOOTMEM [ 0.000000] #68 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #69 [0001f40000 - 0001f5e000] BOOTMEM [ 0.000000] #70 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #71 [0001fc0000 - 0001fde000] BOOTMEM [ 0.000000] #72 [0001d38fc0 - 0001d38fc8] BOOTMEM [ 0.000000] #73 [0001d3c080 - 0001d3c088] BOOTMEM [ 0.000000] #74 [0001d3c0c0 - 0001d3c0e0] BOOTMEM [ 0.000000] #75 [0001d3c100 - 0001d3c140] BOOTMEM [ 0.000000] #76 [0001d3c140 - 0001d3c260] BOOTMEM [ 0.000000] #77 [0001d3c280 - 0001d3c2c8] BOOTMEM [ 0.000000] #78 [0001d3c300 - 0001d3c348] BOOTMEM [ 0.000000] #79 [0001d3c380 - 0001d44380] BOOTMEM [ 0.000000] #80 [0001fde000 - 0005fde000] BOOTMEM [ 0.000000] #81 [0001d44380 - 0001d64380] BOOTMEM [ 0.000000] #82 [0001d64380 - 0001da4380] BOOTMEM [ 0.000000] #83 [000001b800 - 0000023800] BOOTMEM [ 0.000000] Memory: 4031820k/5111808k available (5716k kernel code, 929280k absent, 150708k reserved, 5375k data, 912k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 1733.504 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3467.00 BogoMIPS (lpj=17335040) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.000030] Security Framework initialized [ 0.000045] AppArmor: AppArmor initialized [ 0.000047] Yama: becoming mindful. [ 0.000504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001507] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001909] Mount-cache hash table entries: 256 [ 0.002010] Initializing cgroup subsys ns [ 0.002014] Initializing cgroup subsys cpuacct [ 0.002018] Initializing cgroup subsys memory [ 0.002025] Initializing cgroup subsys devices [ 0.002027] Initializing cgroup subsys freezer [ 0.002029] Initializing cgroup subsys net_cls [ 0.002050] CPU: Physical Processor ID: 0 [ 0.002052] CPU: Processor Core ID: 0 [ 0.002057] mce: CPU supports 9 MCE banks [ 0.002066] CPU0: Thermal monitoring handled by SMI [ 0.002072] using mwait in idle threads. [ 0.002074] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.002081] ... version: 3 [ 0.002082] ... bit width: 48 [ 0.002083] ... generic registers: 4 [ 0.002085] ... value mask: 0000ffffffffffff [ 0.002087] ... max period: 000000007fffffff [ 0.002088] ... fixed-purpose events: 3 [ 0.002090] ... event mask: 000000070000000f [ 0.004328] ACPI: Core revision 20100428 [ 0.023951] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.023955] ftrace: allocating 22687 entries in 89 pages [ 0.032078] Setting APIC routing to flat [ 0.032415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.132303] CPU0: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz stepping 05 [ 0.248170] Booting Node 0, Processors #1 [ 0.407874] CPU1: Thermal monitoring handled by SMI [ 0.427951] #2 [ 0.587642] CPU2: Thermal monitoring handled by SMI [ 0.607733] #3 [ 0.767409] CPU3: Thermal monitoring handled by SMI [ 0.787510] #4 [ 0.947178] CPU4: Thermal monitoring handled by SMI [ 0.967301] #5 [ 1.126943] CPU5: Thermal monitoring handled by SMI [ 1.147083] #6 [ 1.306710] CPU6: Thermal monitoring handled by SMI [ 1.326864] #7 Ok. [ 1.486477] CPU7: Thermal monitoring handled by SMI [ 1.506484] Brought up 8 CPUs [ 1.506487] Total of 8 processors activated (27734.09 BogoMIPS). [ 1.510680] devtmpfs: initialized [ 1.511741] regulator: core version 0.5 [ 1.511766] Time: 0:44:19 Date: 03/15/11 [ 1.511795] NET: Registered protocol family 16 [ 1.511880] Trying to unpack rootfs image as initramfs... [ 1.511897] ACPI: bus type pci registered [ 1.511965] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.511969] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.579277] PCI: Using configuration type 1 for base access [ 1.580091] bio: create slab <bio-0> at 0 [ 1.582016] ACPI: EC: Look up EC in DSDT [ 1.590158] ACPI: BIOS _OSI(Linux) query ignored [ 1.591303] ACPI: SSDT 00000000c771ac18 00298 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 1.591800] ACPI: Dynamic OEM Table Load: [ 1.591803] ACPI: SSDT (null) 00298 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 1.592039] ACPI: SSDT 00000000c7718a18 00471 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 1.592518] ACPI: Dynamic OEM Table Load: [ 1.592520] ACPI: SSDT (null) 00471 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 1.593051] ACPI: SSDT 00000000c7719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 1.593622] ACPI: Dynamic OEM Table Load: [ 1.593624] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 1.593813] ACPI: SSDT 00000000c7717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 1.594328] ACPI: Dynamic OEM Table Load: [ 1.594331] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 1.598390] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1.768534] Freeing initrd memory: 10748k freed [ 1.776302] ACPI: Interpreter enabled [ 1.776306] ACPI: (supports S0 S3 S4 S5) [ 1.776334] ACPI: Using IOAPIC for interrupt routing [ 1.776854] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 1.861041] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 1.946513] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 1.946784] ACPI: No dock devices found. [ 1.946787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.947657] \_SB_.PCI0:_OSC invalid UUID [ 1.947659] _OSC request data:1 8 1f [ 1.947664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.948914] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.948917] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.948920] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.948922] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 1.948925] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 1.948927] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 1.948930] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 1.948933] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xfeafffff] [ 1.949024] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.949028] pci 0000:00:03.0: PME# disabled [ 1.949295] pci 0000:00:1a.0: reg 10: [mem 0xf0e06000-0xf0e063ff] [ 1.949349] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.949353] pci 0000:00:1a.0: PME# disabled [ 1.949386] pci 0000:00:1b.0: reg 10: [mem 0xf0e00000-0xf0e03fff 64bit] [ 1.949427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.949431] pci 0000:00:1b.0: PME# disabled [ 1.949494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.949498] pci 0000:00:1c.0: PME# disabled [ 1.949563] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.949567] pci 0000:00:1c.1: PME# disabled [ 1.949632] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.949636] pci 0000:00:1c.3: PME# disabled [ 1.949701] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.949704] pci 0000:00:1c.4: PME# disabled [ 1.949748] pci 0000:00:1d.0: reg 10: [mem 0xf0e06400-0xf0e067ff] [ 1.949802] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.949806] pci 0000:00:1d.0: PME# disabled [ 1.949970] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837] [ 1.949976] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827] [ 1.949981] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f] [ 1.949987] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823] [ 1.949992] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f] [ 1.949998] pci 0000:00:1f.2: reg 24: [mem 0xf0e05000-0xf0e057ff] [ 1.950029] pci 0000:00:1f.2: PME# supported from D3hot [ 1.950032] pci 0000:00:1f.2: PME# disabled [ 1.950059] pci 0000:00:1f.3: reg 10: [mem 0xf0e06800-0xf0e068ff 64bit] [ 1.950072] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f] [ 1.950145] pci 0000:02:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 1.950156] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.950167] pci 0000:02:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] [ 1.950174] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f] [ 1.950181] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.965976] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 1.965982] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 1.965987] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff] [ 1.965995] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.966099] pci 0000:03:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit] [ 1.966193] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.966199] pci 0000:03:00.0: PME# disabled [ 1.985956] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 1.985960] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 1.985964] pci 0000:00:1c.0: bridge window [mem 0xf0900000-0xf09fffff] [ 1.985969] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.986010] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 1.986014] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 1.986018] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff] [ 1.986023] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 1.986090] pci 0000:07:00.0: reg 10: [io 0x5000-0x50ff] [ 1.986110] pci 0000:07:00.0: reg 18: [mem 0xf0504000-0xf0504fff 64bit pref] [ 1.986124] pci 0000:07:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 1.986133] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.986172] pci 0000:07:00.0: supports D1 D2 [ 1.986174] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.986179] pci 0000:07:00.0: PME# disabled [ 2.005933] pci 0000:00:1c.3: PCI bridge to [bus 07-08] [ 2.005939] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 2.005945] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff] [ 2.005953] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 2.006040] pci 0000:09:00.0: reg 10: [mem 0xf0b00800-0xf0b00fff] [ 2.006050] pci 0000:09:00.0: reg 14: [mem 0xf0b01000-0xf0b0107f] [ 2.006077] pci 0000:09:00.0: reg 20: [mem 0xf0b00400-0xf0b0047f] [ 2.006088] pci 0000:09:00.0: reg 24: [mem 0xf0b00000-0xf0b0007f] [ 2.006184] pci 0000:09:00.1: reg 10: [mem 0xf0b01400-0xf0b014ff] [ 2.006307] pci 0000:09:00.2: reg 10: [mem 0xf0b01800-0xf0b018ff] [ 2.006429] pci 0000:09:00.3: reg 10: [mem 0xf0b01c00-0xf0b01cff] [ 2.025913] pci 0000:00:1c.4: PCI bridge to [bus 09-0a] [ 2.025917] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 2.025921] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0bfffff] [ 2.025927] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 2.025987] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 2.025992] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.025996] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.026002] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.026004] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.026007] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.026009] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.026012] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.026014] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.026016] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.026019] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.026021] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfeafffff] (subtractive decode) [ 2.026050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.026338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.026594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 2.026748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 2.026904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 2.027066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 2.027285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] [ 2.027556] \_SB_.PCI0:_OSC invalid UUID [ 2.027558] _OSC request data:1 1f 1f [ 2.046430] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 2.047393] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 2.047519] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 2.047642] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 2.047765] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 2.047887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 2.048010] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 2.048133] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 2.048255] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.048314] HEST: Table is not found! [ 2.048388] vgaarb: device added: PCI:0000:02:00.0,decodes=io +mem,owns=io+mem,locks=none [ 2.048398] vgaarb: loaded [ 2.048521] SCSI subsystem initialized [ 2.048657] libata version 3.00 loaded. [ 2.048703] usbcore: registered new interface driver usbfs [ 2.048713] usbcore: registered new interface driver hub [ 2.048731] usbcore: registered new device driver usb [ 2.049027] ACPI: WMI: Mapper loaded [ 2.049029] PCI: Using ACPI for IRQ routing [ 2.049031] PCI: pci_cache_line_size set to 64 bytes [ 2.049150] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 2.049152] reserve RAM buffer: 00000000c727c000 - 00000000c7ffffff [ 2.049157] reserve RAM buffer: 00000000c73ea000 - 00000000c7ffffff [ 2.049161] reserve RAM buffer: 00000000c746f000 - 00000000c7ffffff [ 2.049165] reserve RAM buffer: 00000000c7717000 - 00000000c7ffffff [ 2.049168] reserve RAM buffer: 00000000c7782000 - 00000000c7ffffff [ 2.049170] reserve RAM buffer: 00000000c77e3000 - 00000000c7ffffff [ 2.049173] reserve RAM buffer: 00000000c7800000 - 00000000c7ffffff [ 2.049252] NetLabel: Initializing [ 2.049253] NetLabel: domain hash size = 128 [ 2.049255] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.049266] NetLabel: unlabeled traffic allowed by default [ 2.049299] alloc irq_desc for 40 on node -1 [ 2.049300] alloc kstat_irqs on node -1 [ 2.049307] alloc irq_desc for 41 on node -1 [ 2.049309] alloc kstat_irqs on node -1 [ 2.049313] alloc irq_desc for 42 on node -1 [ 2.049315] alloc kstat_irqs on node -1 [ 2.049318] alloc irq_desc for 43 on node -1 [ 2.049320] alloc kstat_irqs on node -1 [ 2.049323] alloc irq_desc for 44 on node -1 [ 2.049325] alloc kstat_irqs on node -1 [ 2.049328] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 2.049335] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0 [ 2.049342] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.055806] hpet: hpet2 irq 40 for MSI [ 2.055867] hpet: hpet3 irq 41 for MSI [ 2.065871] hpet: hpet4 irq 42 for MSI [ 2.075867] hpet: hpet5 irq 43 for MSI [ 2.085878] hpet: hpet6 irq 44 for MSI [ 2.105822] Switching to clocksource tsc [ 2.113437] AppArmor: AppArmor Filesystem Enabled [ 2.113445] pnp: PnP ACPI init [ 2.113455] ACPI: bus type pnp registered [ 2.147922] pnp: PnP ACPI: found 11 devices [ 2.147924] ACPI: ACPI bus type pnp unregistered [ 2.147934] system 00:05: [io 0x0680-0x069f] has been reserved [ 2.147940] system 00:05: [io 0x0500-0x050f] has been reserved [ 2.147942] system 00:05: [io 0x0600-0x0603] has been reserved [ 2.147945] system 00:05: [io 0xffff] has been reserved [ 2.147947] system 00:05: [io 0x0400-0x047f] has been reserved [ 2.147950] system 00:05: [io 0x1180-0x11ff] has been reserved [ 2.147952] system 00:05: [io 0x164e-0x164f] has been reserved [ 2.147955] system 00:05: [io 0xfe00] has been reserved [ 2.147961] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.147965] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 2.147968] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 2.147971] system 00:09: [mem 0xf0e04000-0xf0e04fff] has been reserved [ 2.147973] system 00:09: [mem 0xc8000000-0xc8000fff] has been reserved [ 2.147976] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.147979] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.147981] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.147984] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 2.147987] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.153713] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 2.153716] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.153719] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 2.153723] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff] [ 2.153726] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.153732] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 2.153734] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.153739] pci 0000:00:1c.0: bridge window [mem 0xf0900000-0xf09fffff] [ 2.153743] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 2.153749] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 2.153752] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 2.153756] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff] [ 2.153760] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 2.153767] pci 0000:07:00.0: BAR 6: assigned [mem 0xf0420000-0xf043ffff pref] [ 2.153769] pci 0000:00:1c.3: PCI bridge to [bus 07-08] [ 2.153772] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 2.153777] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff] [ 2.153781] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 2.153787] pci 0000:00:1c.4: PCI bridge to [bus 09-0a] [ 2.153790] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 2.153795] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0bfffff] [ 2.153799] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 2.153804] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 2.153806] pci 0000:00:1e.0: bridge window [io disabled] [ 2.153810] pci 0000:00:1e.0: bridge window [mem disabled] [ 2.153814] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 2.153825] alloc irq_desc for 16 on node -1 [ 2.153827] alloc kstat_irqs on node -1 [ 2.153832] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.153836] pci 0000:00:03.0: setting latency timer to 64 [ 2.153844] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.153848] pci 0000:00:1c.0: setting latency timer to 64 [ 2.153858] alloc irq_desc for 17 on node -1 [ 2.153859] alloc kstat_irqs on node -1 [ 2.153863] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.153867] pci 0000:00:1c.1: setting latency timer to 64 [ 2.153874] alloc irq_desc for 19 on node -1 [ 2.153875] alloc kstat_irqs on node -1 [ 2.153879] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.153883] pci 0000:00:1c.3: setting latency timer to 64 [ 2.153890] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.153894] pci 0000:00:1c.4: setting latency timer to 64 [ 2.153900] pci 0000:00:1e.0: setting latency timer to 64 [ 2.153904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.153906] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.153908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.153910] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.153913] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.153915] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.153917] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 2.153919] pci_bus 0000:00: resource 11 [mem 0xc8000000-0xfeafffff] [ 2.153921] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.153923] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xceffffff] [ 2.153926] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.153928] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 2.153930] pci_bus 0000:03: resource 1 [mem 0xf0900000-0xf09fffff] [ 2.153932] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 2.153935] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 2.153937] pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf08fffff] [ 2.153939] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 2.153941] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff] [ 2.153943] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff] [ 2.153945] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 2.153948] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff] [ 2.153950] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0bfffff] [ 2.153952] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 2.153954] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 2.153956] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 2.153958] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 2.153961] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.153963] pci_bus 0000:0b: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.153965] pci_bus 0000:0b: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.153967] pci_bus 0000:0b: resource 10 [mem 0x000dc000-0x000dffff] [ 2.153969] pci_bus 0000:0b: resource 11 [mem 0xc8000000-0xfeafffff] [ 2.153997] NET: Registered protocol family 2 [ 2.154144] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.155178] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.158264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.158634] TCP: Hash tables configured (established 524288 bind 65536) [ 2.158637] TCP reno registered [ 2.158648] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 2.158690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 2.158801] NET: Registered protocol family 1 [ 2.158908] pci 0000:02:00.0: Boot video device [ 2.158952] PCI: CLS 64 bytes, default 64 [ 2.158954] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.158957] Placing 64MB software IO TLB between ffff880001fde000 - ffff880005fde000 [ 2.158959] software IO TLB at phys 0x1fde000 - 0x5fde000 [ 2.159403] Scanning for low memory corruption every 60 seconds [ 2.159509] audit: initializing netlink socket (disabled) [ 2.159516] type=2000 audit(1300149859.980:1): initialized [ 2.175509] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.176961] VFS: Disk quotas dquot_6.5.2 [ 2.177017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.177569] fuse init (API version 7.14) [ 2.177658] msgmni has been set to 7895 [ 2.179739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.179741] io scheduler noop registered [ 2.179743] io scheduler deadline registered [ 2.179780] io scheduler cfq registered (default) [ 2.179891] pcieport 0000:00:03.0: setting latency timer to 64 [ 2.179916] alloc irq_desc for 45 on node -1 [ 2.179918] alloc kstat_irqs on node -1 [ 2.179926] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X [ 2.179984] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.180013] alloc irq_desc for 46 on node -1 [ 2.180017] alloc kstat_irqs on node -1 [ 2.180024] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X [ 2.180086] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.180115] alloc irq_desc for 47 on node -1 [ 2.180117] alloc kstat_irqs on node -1 [ 2.180124] pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X [ 2.180189] pcieport 0000:00:1c.3: setting latency timer to 64 [ 2.180219] alloc irq_desc for 48 on node -1 [ 2.180220] alloc kstat_irqs on node -1 [ 2.180227] pcieport 0000:00:1c.3: irq 48 for MSI/MSI-X [ 2.180289] pcieport 0000:00:1c.4: setting latency timer to 64 [ 2.180319] alloc irq_desc for 49 on node -1 [ 2.180320] alloc kstat_irqs on node -1 [ 2.180327] pcieport 0000:00:1c.4: irq 49 for MSI/MSI-X [ 2.180517] \_SB_.PCI0:_OSC invalid UUID [ 2.180519] _OSC request data:1 0 1f [ 2.180523] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed [ 2.180543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.180642] \_SB_.PCI0:_OSC invalid UUID [ 2.180644] _OSC request data:1 0 1f [ 2.180753] \_SB_.PCI0:_OSC invalid UUID [ 2.180755] _OSC request data:1 0 1f [ 2.180863] \_SB_.PCI0:_OSC invalid UUID [ 2.180864] _OSC request data:1 0 1f [ 2.180972] \_SB_.PCI0:_OSC invalid UUID [ 2.180974] _OSC request data:1 0 1f [ 2.181095] \_SB_.PCI0:_OSC invalid UUID [ 2.181097] _OSC request data:1 0 1f [ 2.181204] \_SB_.PCI0:_OSC invalid UUID [ 2.181206] _OSC request data:1 0 1f [ 2.181313] \_SB_.PCI0:_OSC invalid UUID [ 2.181315] _OSC request data:1 0 1f [ 2.181422] \_SB_.PCI0:_OSC invalid UUID [ 2.181423] _OSC request data:1 0 1f [ 2.181445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.181514] intel_idle: MWAIT substates: 0x1120 [ 2.181516] intel_idle: v0.4 model 0x1E [ 2.181517] intel_idle: lapic_timer_reliable_states 0x2 [ 2.215821] ACPI: AC Adapter [AC] (on-line) [ 2.215897] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.215904] ACPI: Power Button [PWRB] [ 2.215937] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.215941] ACPI: Sleep Button [SLPB] [ 2.215975] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.285709] ACPI: Lid Switch [LID0] [ 2.285753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.285757] ACPI: Power Button [PWRF] [ 2.286414] ACPI: acpi_idle yielding to intel_idle [ 4.962489] thermal LNXTHERM:01: registered as thermal_zone0 [ 4.962499] ACPI: Thermal Zone [TZ0] (52 C) [ 4.962564] ERST: Table is not found! [ 5.002577] Linux agpgart interface v0.103 [ 5.002597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.003761] brd: module loaded [ 5.004191] loop: module loaded [ 5.004583] Fixed MDIO Bus: probed [ 5.004609] PPP generic driver version 2.4.2 [ 5.004638] tun: Universal TUN/TAP device driver, 1.6 [ 5.004640] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 5.004703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.004722] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.004739] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.004742] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.004772] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.004798] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.008717] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 5.008732] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0e06000 [ 5.024218] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.024343] hub 1-0:1.0: USB hub found [ 5.024347] hub 1-0:1.0: 3 ports detected [ 5.024407] alloc irq_desc for 23 on node -1 [ 5.024409] alloc kstat_irqs on node -1 [ 5.024414] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.024427] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.024430] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.024462] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.024485] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.028419] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 5.028432] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0e06400 [ 5.044194] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.044310] hub 2-0:1.0: USB hub found [ 5.044314] hub 2-0:1.0: 3 ports detected [ 5.044374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.044386] uhci_hcd: USB Universal Host Controller Interface driver [ 5.044473] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 5.048199] i8042.c: Detected active multiplexing controller, rev 1.1. [ 5.050663] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.050669] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 5.050671] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 5.050674] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 5.050677] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 5.050731] mice: PS/2 mouse device common for all mice [ 5.050869] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 5.050894] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 5.050980] device-mapper: uevent: version 1.0.3 [ 5.051049] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected] [ 5.051190] device-mapper: multipath: version 1.1.1 loaded [ 5.051192] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.051663] cpuidle: using governor ladder [ 5.051951] cpuidle: using governor menu [ 5.052201] TCP cubic registered [ 5.052316] NET: Registered protocol family 10 [ 5.052845] lo: Disabled Privacy Extensions [ 5.053161] NET: Registered protocol family 17 [ 5.088241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 5.342085] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.492734] hub 1-1:1.0: USB hub found [ 5.492937] hub 1-1:1.0: 6 ports detected [ 5.611747] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 5.763501] hub 2-1:1.0: USB hub found [ 5.763720] hub 2-1:1.0: 8 ports detected [ 5.841735] usb 1-1.1: new high speed USB device using ehci_hcd and address 3 [ 6.114587] PM: Resume from disk failed. [ 6.114592] registered taskstats version 1 [ 6.114890] Magic number: 3:787:708 [ 6.115045] rtc_cmos 00:06: setting system clock to 2011-03-15 00:44:24 UTC (1300149864) [ 6.115050] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.115053] EDD information not available. [ 6.115135] Freeing unused kernel memory: 912k freed [ 6.115261] Write protecting the kernel read-only data: 10240k [ 6.115503] Freeing unused kernel memory: 408k freed [ 6.115781] Freeing unused kernel memory: 1644k freed [ 6.131219] udev[147]: starting version 163 [ 6.192431] usb 1-1.3: new full speed USB device using ehci_hcd and address 4 [ 6.371075] usb 2-1.4: new low speed USB device using ehci_hcd and address 3 [ 6.497621] usbcore: registered new interface driver hiddev [ 6.500435] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5 [ 6.500489] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0 [ 6.502774] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1 [ 6.502800] usbcore: registered new interface driver usbhid [ 6.502803] usbhid: USB HID core driver [ 6.730813] ACPI: Battery Slot [BAT] (battery present) [ 7.420989] ahci 0000:00:1f.2: version 3.0 [ 7.421006] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.421062] alloc irq_desc for 50 on node -1 [ 7.421065] alloc kstat_irqs on node -1 [ 7.421077] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X [ 7.421113] ahci: SSS flag set, parallel bus scan disabled [ 7.423493] sdhci: Secure Digital Host Controller Interface driver [ 7.423497] sdhci: Copyright(c) Pierre Ossman [ 7.425733] sdhci-pci 0000:09:00.1: SDHCI controller found [197b:2382] (rev 0) [ 7.425754] sdhci-pci 0000:09:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.425837] sdhci-pci 0000:09:00.1: setting latency timer to 64 [ 7.425876] Registered led device: mmc0:: [ 7.425913] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA [ 7.425927] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 0) [ 7.425946] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.425954] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface. [ 7.425962] sdhci-pci 0000:09:00.2: PCI INT A disabled [ 7.432588] firewire_ohci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.432596] firewire_ohci 0000:09:00.0: setting latency timer to 64 [ 7.432916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.432933] r8169 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.432979] r8169 0000:07:00.0: setting latency timer to 64 [ 7.433024] alloc irq_desc for 51 on node -1 [ 7.433027] alloc kstat_irqs on node -1 [ 7.433040] r8169 0000:07:00.0: irq 51 for MSI/MSI-X [ 7.433421] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc90000678000, 00:90:f5:9f:c4:46, XID 081000c0 IRQ 51 [ 7.433958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode [ 7.433964] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 7.433967] ahci 0000:00:1f.2: setting latency timer to 64 [ 7.514200] scsi0 : ahci [ 7.514560] scsi1 : ahci [ 7.514814] scsi2 : ahci [ 7.515071] scsi3 : ahci [ 7.515289] scsi4 : ahci [ 7.515507] scsi5 : ahci [ 7.515603] ata1: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05100 irq 50 [ 7.515608] ata2: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05180 irq 50 [ 7.515613] ata3: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05200 irq 50 [ 7.515617] ata4: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05280 irq 50 [ 7.515622] ata5: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05300 irq 50 [ 7.515625] ata6: DUMMY [ 7.574237] firewire_ohci: isochronous cycle inconsistent [ 7.589422] firewire_ohci: Added fw-ohci device 0000:09:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x0 [ 7.859077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.861164] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133 [ 7.861170] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.863729] ata1.00: configured for UDMA/133 [ 7.879220] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5 [ 7.879389] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.879480] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.879567] sd 0:0:0:0: [sda] Write Protect is off [ 7.879573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.879627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.879931] sda: sda1 sda2 < sda5 > [ 7.938345] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.068832] firewire_core: created device fw0: GUID ffe473fffffffffe, S400 [ 8.077935] firewire_core: created device fw1: GUID 00804580112bc4b8, S100 [ 8.077941] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 8.090971] firewire_core: skipped bus generations, destroying all nodes [ 8.588178] firewire_core: rediscovered device fw0 [ 8.628143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.640929] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100 [ 8.656222] ata2.00: configured for UDMA/100 [ 8.670535] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5 [ 8.686834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.686839] Uniform CD-ROM driver Revision: 3.20 [ 8.686968] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.687031] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.038855] ata3: SATA link down (SStatus 0 SControl 300) [ 9.407224] ata4: SATA link down (SStatus 0 SControl 300) [ 9.779888] ata5: SATA link down (SStatus 0 SControl 300) [ 10.261803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.336349] Adding 11852796k swap on /dev/sda5. Priority:-1 extents:1 across:11852796k [ 18.430763] udev[514]: starting version 163 [ 18.439616] lp: driver loaded but no devices found [ 18.451867] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS [ 18.452242] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 18.608848] acpi device:48: registered as cooling_device8 [ 18.609343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input6 [ 18.609388] ACPI: Video Device [MXM3] (multi-head: yes rom: no post: no) [ 18.870991] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 19.100275] type=1400 audit(1300149877.496:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=678 comm="apparmor_parser" [ 19.100633] type=1400 audit(1300149877.496:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser" [ 19.100828] type=1400 audit(1300149877.496:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser" [ 19.157456] r8169 0000:07:00.0: eth0: link down [ 19.157830] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.287371] EDAC MC: Ver: 2.1.0 Feb 22 2011 [ 19.304523] cfg80211: Calling CRDA to update world regulatory domain [ 19.308610] nvidia: module license 'NVIDIA' taints kernel. [ 19.308613] Disabling lock debugging due to kernel taint [ 19.308626] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 19.309779] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.309787] jmb38x_ms 0000:09:00.3: setting latency timer to 64 [ 19.329597] cfg80211: World regulatory domain updated: [ 19.329599] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.329602] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.329605] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.329607] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.329609] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.329611] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.356230] Linux video capture interface: v2.00 [ 19.364467] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0343) [ 19.367023] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7 [ 19.367094] usbcore: registered new interface driver uvcvideo [ 19.367097] USB Video Class driver (v0.1.0) [ 19.393734] type=1400 audit(1300149877.786:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1122 comm="apparmor_parser" [ 19.394904] type=1400 audit(1300149877.786:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1116 comm="apparmor_parser" [ 19.394969] type=1400 audit(1300149877.786:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser" [ 19.395466] type=1400 audit(1300149877.786:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser" [ 19.395530] type=1400 audit(1300149877.786:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1120 comm="apparmor_parser" [ 19.395769] type=1400 audit(1300149877.786:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1116 comm="apparmor_parser" [ 19.413938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 19.413941] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 19.413992] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.414000] iwlagn 0000:03:00.0: setting latency timer to 64 [ 19.414046] iwlagn 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 [ 19.435222] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 19.435274] alloc irq_desc for 52 on node -1 [ 19.435276] alloc kstat_irqs on node -1 [ 19.435293] iwlagn 0000:03:00.0: irq 52 for MSI/MSI-X [ 19.448365] alloc irq_desc for 22 on node -1 [ 19.448367] alloc kstat_irqs on node -1 [ 19.448373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.448486] alloc irq_desc for 53 on node -1 [ 19.448488] alloc kstat_irqs on node -1 [ 19.448497] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 19.448517] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.493459] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 19.499857] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.676282] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.676288] nvidia 0000:02:00.0: setting latency timer to 64 [ 19.676292] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 19.676415] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010 [ 19.747338] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.773233] Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 2 [ 19.828348] ppdev: user-space parallel port driver [ 20.190409] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio4/input/input8 [ 21.237792] vboxdrv: Found 8 processor cores. [ 21.237839] VBoxDrv: dbg - g_abExecMemory=ffffffffa0de05e0 [ 21.238190] vboxdrv: fAsync=0 offMin=0x1bb offMax=0xbaf4 [ 21.238224] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.238226] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000). [ 23.375210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.530241] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 39.840376] firewire_core: giving up on config rom for node id ffc1 [ 39.840384] firewire_core: phy config: card 0, new root=ffc0, gap_count=5 [ 39.864710] firewire_core: skipped bus generations, destroying all nodes [ 40.363665] firewire_core: rediscovered device fw0 [ 40.459771] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 40.484001] firewire_core: skipped bus generations, destroying all nodes [ 40.979176] firewire_core: rediscovered device fw0 [ 40.990075] firewire_core: created device fw1: GUID 00804580112bc4b8, S100 [ 40.990080] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 41.013281] firewire_core: skipped bus generations, destroying all nodes [ 41.508513] firewire_core: rediscovered device fw0 [ 41.608378] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 41.628887] firewire_core: skipped bus generations, destroying all nodes [ 42.127785] firewire_core: rediscovered device fw0 [ 42.227641] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 42.251858] firewire_core: skipped bus generations, destroying all nodes [ 42.746973] firewire_core: rediscovered device fw0 [ 42.846850] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 42.868590] firewire_core: skipped bus generations, destroying all nodes [ 43.366305] firewire_core: rediscovered device fw0 [ 43.466171] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 43.490404] firewire_core: skipped bus generations, destroying all nodes [ 43.509859] firewire_core: giving up on config rom for node id ffc0 [ 43.985543] firewire_core: rediscovered device fw0 [ 44.085402] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 44.109636] firewire_core: skipped bus generations, destroying all nodes [ 44.604784] firewire_core: rediscovered device fw0 [ 44.614784] firewire_core: giving up on config rom for node id ffc0 [ 44.704648] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 44.728901] firewire_core: skipped bus generations, destroying all nodes [ 45.224039] firewire_core: rediscovered device fw0 [ 45.323910] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 45.348161] firewire_core: skipped bus generations, destroying all nodes [ 45.367636] firewire_core: giving up on config rom for node id ffc0 [ 45.843316] firewire_core: rediscovered device fw0 [ 45.851031] firewire_core: rediscovered device fw1 [ 45.857031] firewire_core: giving up on config rom for node id ffc0 [ 46.472533] firewire_core: giving up on config rom for node id ffc0 [ 47.091801] firewire_core: giving up on config rom for node id ffc0 [ 47.711022] firewire_core: giving up on config rom for node id ffc0 [ 48.330300] firewire_core: giving up on config rom for node id ffc0 [ 110.108578] wlan0: authenticate with 00:14:bf:46:34:dc (try 1) [ 110.111652] wlan0: authenticated [ 110.111696] wlan0: associate with 00:14:bf:46:34:dc (try 1) [ 110.114056] wlan0: RX AssocResp from 00:14:bf:46:34:dc (capab=0x411 status=0 aid=2) [ 110.114062] wlan0: associated [ 110.117318] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 111.147459] Intel AES-NI instructions are not detected. [ 111.230736] padlock: VIA PadLock not detected. [ 120.816438] wlan0: no IPv6 routers present reid@rsv-linux:~$ --=-xdVI6roPTa8PGoOza9uz Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 7bit <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.30.3"> </HEAD> <BODY> On Sun, 2011-03-13 at 17:33 +0100, Stefan Richter wrote: <BLOCKQUOTE TYPE=CITE> <PRE> On Mar 13 Reid wrote: > I'm running Kino 1.3.4 on Ubuntu 10.10 and am having trouble importing > DV from my camcorder using firewire. > > My Panasonic camcorder is recognized and the capture starts but then > quits after a minute or two. Also, after that the camcorder is no longer > recognized. Like it's forgotten. Computer needs to be rebooted and > then is seen again. Plugging it out and in again does not help either? > I have looked around the 'Net and seen comments from uses that say to > start Kino as root, Never run application programs as root, it's too dangerous. > and to use the pads command to start Kino, but it > doesn't seem to make any difference with this issue, though that has > helped the sound recording issue. It's odd that his just popped up > because everything was working fine two months ago. Or so I thought. > > Happy to provide added spec info if needed. The output of "lspci -nn" would be good, also the output of "dmesg" from a session in which you captured something and connection breaks up as you described. </PRE> </BLOCKQUOTE> Stefan -<BR> <BR> Here's the output you suggested. It's a LOT. Thanks for helping. To me, this behaves like kernel bug. For example, firewire capture also fails in kdenlive. And yet, I don't believe it's hardware (though I guess it's possible) because everything worked just fine a few months ago. Of course I realize that hardware can just fail.... <BR> <BR> I do notice in CLI capture and AVC status error..whatever that might indicate....<BR> <BR> Anyway here the info.. <BR> <BR> And thanks.<BR> <BR> Reid<BR> <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ lspci -nn<BR> 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11)<BR> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)<BR> 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)<BR> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)<BR> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)<BR> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)<BR> 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)<BR> 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)<BR> 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)<BR> 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)<BR> 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)<BR> 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)<BR> 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)<BR> 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)<BR> 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)<BR> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)<BR> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 06)<BR> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06)<BR> 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)<BR> 02:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTX 285M] [10de:060f] (rev a2)<BR> 03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]<BR> 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)<BR> 09:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]<BR> 09:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382]<BR> 09:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381]<BR> 09:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383]<BR> ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04)<BR> ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)<BR> ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)<BR> ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)<BR> ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)<BR> ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)<BR> ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)<BR> ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)<BR> ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)<BR> ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)<BR> ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)<BR> ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)<BR> ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)<BR> ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)<BR> ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)<BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <BR> <BR> <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ padsp kino<BR> > help language code en<BR> > Kino Common being built<BR> > Creating page editor<BR> > Creating Capture Page<BR> > Creating Export Page<BR> > Creating Export1394 Page<BR> > Creating ExportAVI Page<BR> > Creating ExportStills Page<BR> > Creating ExportAudio Page<BR> > Creating ExportMJPEG Page<BR> /usr/share/kino/scripts/dvdauthor/dvdauthor.sh<BR> /usr/share/kino/scripts/dvdauthor/dvdauthor-brasero.sh<BR> /usr/share/kino/scripts/dvdauthor/qdvdauthor.sh<BR> /usr/share/kino/scripts/dvdauthor/growisofs.sh<BR> /usr/share/kino/scripts/dvdauthor/none.sh<BR> /usr/share/kino/scripts/dvdauthor/dvdauthor-k3b.sh<BR> > Initializing MJPEG Export Page settings from Preferences<BR> > Creating ExportPipe Page<BR> /usr/share/kino/scripts/exports/ffmpeg_mp4.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_mov.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_dvd.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_vcd.sh<BR> /usr/share/kino/scripts/exports/gstreamer_utils.sh<BR> /usr/share/kino/scripts/exports/gstreamer_theora.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_dvd_dual.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_utils.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_divx_dual.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_h264_ps3.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_3gp.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_h264.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_mp4_dual.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_huffyuv.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_mp3.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_xvid_dual.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_divx.sh<BR> /usr/share/kino/scripts/exports/ffmpeg2theora.sh<BR> /usr/share/kino/scripts/exports/ffmpeg2dirac.sh<BR> /usr/share/kino/scripts/exports/rawplay.sh<BR> /usr/share/kino/scripts/exports/extract_chapters<BR> /usr/share/kino/scripts/exports/mencoder.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_flv.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_h264_dual.sh<BR> /usr/share/kino/scripts/exports/ffmpeg_xvid.sh<BR> > Creating page trim<BR> >>> Image Create: Colour Range<BR> >>> Image Create: Fixed Colour<BR> >>> Image Create: From File<BR> >>> Image Create: Gradient<BR> >>> Image Create: Random noise<BR> >>> Image Filter: No Change<BR> >>> Image Filter: Black & White<BR> >>> Image Filter: Kaleidoscope<BR> >>> Image Filter: Fade In<BR> >>> Image Filter: Fade Out<BR> >>> Image Filter: Flip<BR> >>> Image Filter: Mirror<BR> >>> Image Filter: Reverse Video<BR> >>> Image Filter: Sepia<BR> >>> Image Transition: Dissolve<BR> >>> Image Transition: Barn Door Wipe<BR> >>> Image Transition: Differences<BR> >>> Image Transition: No Change<BR> >>> Image Transition: Push Wipe<BR> >>> Image Transition: Switch<BR> >>> Audio Filter: No Change<BR> >>> Audio Filter: Dub<BR> >>> Audio Filter: Fade In<BR> >>> Audio Filter: Fade Out<BR> >>> Audio Filter: Gain<BR> >>> Audio Filter: Mix<BR> >>> Audio Filter: Silence<BR> >>> Audio Transition: Cross Fade<BR> >>> Audio Transition: No Change<BR> > Creating Magick Page<BR> >> Searching /usr/lib/kino-gtk2 for plugins<BR> >>> Registering plugin /usr/lib/kino-gtk2/libdvtitler.so<BR> >>> Registering plugin /usr/lib/kino-gtk2/libtimfx.so<BR> >>> Registering plugin /usr/lib/kino-gtk2/libkinoplus.so<BR> >>> Image Filter: Superimpose<BR> >>> Image Filter: Titler<BR> >>> Image Filter: Blur<BR> >>> Image Filter: Colour Hold<BR> >>> Image Filter: Soft Focus<BR> >>> Image Transition: Luma Wipe<BR> >>> Image Filter: Colour Average<BR> >>> Image Filter: Charcoal<BR> >>> Image Filter: Jerky<BR> >>> Image Filter: Levels<BR> >>> Image Filter: Pan and Zoom<BR> >>> Image Filter: Pixelate<BR> >>> Image Transition: Composite<BR> >>> Image Transition: Blue Chroma Key<BR> >>> Image Transition: Green Chroma Key<BR> >> Creating undo/redo buffer<BR> > setting video preview size to 427x240<BR> >> Starting Editor<BR> >> Kino Common newFile<BR> >>> Received playlist to store at position 0<BR> >>>> Adding to end<BR> >> Leaving Editor<BR> >> Left Editor<BR> >> Starting Capture<BR> >> AV/C Enabled<BR> >>> Using iec61883 capture<BR> rom1394_0 warning: read failed: 0x0000fffff0000414<BR> >>> iec61883Reader::StartThread on port 0<BR> >>> AVC enabled <BR> >> Constructing File Capture tracker<BR> rom1394_0 warning: read failed: 0x0000fffff0000414<BR> >> Leaving Capture<BR> >> Starting Capture<BR> >>> Using iec61883 capture<BR> rom1394_0 warning: read failed: 0x0000fffff0000414<BR> >>> iec61883Reader::StartThread on port 0<BR> >>> AVC enabled <BR> >>> Trying /home/reid/Video1/Christmas '10 & Lunar New Year '11/CAC Dances-four001.dv<BR> >>>> Registering /home/reid/Video1/Christmas '10 & Lunar New Year '11/CAC Dances-four001.dv with the tracker<BR> >> Trying XVideo at 720x480<BR> >>> XvQueryAdaptors count: 1<BR> >>> Xv: NV17 Video Texture: ports 310 - 341<BR> >>> formats supported: 4<BR> >>> 0x32595559 (YUY2) packed<BR> >>> 0x32315659 (YV12) planar<BR> >>> 0x59565955 (UYVY) packed<BR> >>> 0x30323449 (I420) planar<BR> >>> 0: XV_IMAGE, 8192x8192 rate = 1/1<BR> send oops<BR> send oops<BR> send oops<BR> >>> AVC status error<BR> send oops<BR> send oops<BR> send oops<BR> >>> AVC status error<BR> send oops<BR> send oops<BR> send oops<BR> send oops<BR> send oops<BR> send oops<BR> send oops<BR> Killed<BR> <BR> ________________________________________________________________________________________________________________________________________________________________<BR> <BR> <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ dmesg<BR> [ 0.000000] Initializing cgroup subsys cpuset<BR> [ 0.000000] Initializing cgroup subsys cpu<BR> [ 0.000000] Linux version 2.6.35-27-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11)<BR> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash<BR> [ 0.000000] BIOS-provided physical RAM map:<BR> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)<BR> [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)<BR> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c727c000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c727c000 - 00000000c7282000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000c7282000 - 00000000c73ea000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c73ea000 - 00000000c740f000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000c740f000 - 00000000c746f000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c746f000 - 00000000c7470000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000c7470000 - 00000000c74f1000 (ACPI NVS)<BR> [ 0.000000] BIOS-e820: 00000000c74f1000 - 00000000c770f000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000c770f000 - 00000000c7717000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c7717000 - 00000000c771f000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000c771f000 - 00000000c7782000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c7782000 - 00000000c779f000 (ACPI NVS)<BR> [ 0.000000] BIOS-e820: 00000000c779f000 - 00000000c77e3000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c77e3000 - 00000000c77ff000 (ACPI data)<BR> [ 0.000000] BIOS-e820: 00000000c77ff000 - 00000000c7800000 (usable)<BR> [ 0.000000] BIOS-e820: 00000000c7800000 - 00000000c8000000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000f0e04000 - 00000000f0e05000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)<BR> [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)<BR> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)<BR> [ 0.000000] NX (Execute Disable) protection: active<BR> [ 0.000000] DMI present.<BR> [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.<BR> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)<BR> [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)<BR> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)<BR> [ 0.000000] No AGP bridge found<BR> [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000<BR> [ 0.000000] MTRR default type: uncachable<BR> [ 0.000000] MTRR fixed ranges enabled:<BR> [ 0.000000] 00000-9FFFF write-back<BR> [ 0.000000] A0000-BFFFF uncachable<BR> [ 0.000000] C0000-CFFFF write-protect<BR> [ 0.000000] D0000-DBFFF uncachable<BR> [ 0.000000] DC000-FFFFF write-through<BR> [ 0.000000] MTRR variable ranges enabled:<BR> [ 0.000000] 0 disabled<BR> [ 0.000000] 1 base 000000000 mask F80000000 write-back<BR> [ 0.000000] 2 base 080000000 mask FC0000000 write-back<BR> [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back<BR> [ 0.000000] 4 base 100000000 mask FE0000000 write-back<BR> [ 0.000000] 5 base 120000000 mask FF0000000 write-back<BR> [ 0.000000] 6 base 130000000 mask FF8000000 write-back<BR> [ 0.000000] 7 disabled<BR> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106<BR> [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)<BR> [ 0.000000] last_pfn = 0xc7800 max_arch_pfn = 0x400000000<BR> [ 0.000000] Scanning 0 areas for low memory corruption<BR> [ 0.000000] modified physical RAM map:<BR> [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)<BR> [ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)<BR> [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved)<BR> [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)<BR> [ 0.000000] modified: 0000000000100000 - 00000000c727c000 (usable)<BR> [ 0.000000] modified: 00000000c727c000 - 00000000c7282000 (reserved)<BR> [ 0.000000] modified: 00000000c7282000 - 00000000c73ea000 (usable)<BR> [ 0.000000] modified: 00000000c73ea000 - 00000000c740f000 (reserved)<BR> [ 0.000000] modified: 00000000c740f000 - 00000000c746f000 (usable)<BR> [ 0.000000] modified: 00000000c746f000 - 00000000c7470000 (reserved)<BR> [ 0.000000] modified: 00000000c7470000 - 00000000c74f1000 (ACPI NVS)<BR> [ 0.000000] modified: 00000000c74f1000 - 00000000c770f000 (reserved)<BR> [ 0.000000] modified: 00000000c770f000 - 00000000c7717000 (usable)<BR> [ 0.000000] modified: 00000000c7717000 - 00000000c771f000 (reserved)<BR> [ 0.000000] modified: 00000000c771f000 - 00000000c7782000 (usable)<BR> [ 0.000000] modified: 00000000c7782000 - 00000000c779f000 (ACPI NVS)<BR> [ 0.000000] modified: 00000000c779f000 - 00000000c77e3000 (usable)<BR> [ 0.000000] modified: 00000000c77e3000 - 00000000c77ff000 (ACPI data)<BR> [ 0.000000] modified: 00000000c77ff000 - 00000000c7800000 (usable)<BR> [ 0.000000] modified: 00000000c7800000 - 00000000c8000000 (reserved)<BR> [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)<BR> [ 0.000000] modified: 00000000f0e04000 - 00000000f0e05000 (reserved)<BR> [ 0.000000] modified: 00000000feaff000 - 00000000feb00000 (reserved)<BR> [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)<BR> [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)<BR> [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)<BR> [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)<BR> [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)<BR> [ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable)<BR> [ 0.000000] initial memory mapped : 0 - 20000000<BR> [ 0.000000] found SMP MP-table at [ffff8800000f6850] f6850<BR> [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7800000<BR> [ 0.000000] 0000000000 - 00c7800000 page 2M<BR> [ 0.000000] kernel direct mapping tables up to c7800000 @ 16000-1b000<BR> [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000<BR> [ 0.000000] 0100000000 - 0138000000 page 2M<BR> [ 0.000000] kernel direct mapping tables up to 138000000 @ 19000-1f000<BR> [ 0.000000] RAMDISK: 37571000 - 37ff0000<BR> [ 0.000000] ACPI: RSDP 00000000000f6790 00024 (v02 PTLTD )<BR> [ 0.000000] ACPI: XSDT 00000000c77f5102 00054 (v01 MSTEST TESTONLY 06040000 LTP 00000000)<BR> [ 0.000000] ACPI: FACP 00000000c77e5000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)<BR> [ 0.000000] ACPI: DSDT 00000000c77e6000 0994C (v02 Intel CALPELLA 06040000 INTL 20060912)<BR> [ 0.000000] ACPI: FACS 00000000c779bfc0 00040<BR> [ 0.000000] ACPI: HPET 00000000c77fec42 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)<BR> [ 0.000000] ACPI: MCFG 00000000c77fec7a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)<BR> [ 0.000000] ACPI: APIC 00000000c77fecb6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)<BR> [ 0.000000] ACPI: SLIC 00000000c77fed72 00176 (v01 MSTEST TESTONLY 06040000 LTP 00000000)<BR> [ 0.000000] ACPI: SSDT 00000000c77e4000 009F7 (v01 PmRef CpuPm 00003000 INTL 20060912)<BR> [ 0.000000] ACPI: Local APIC address 0xfee00000<BR> [ 0.000000] No NUMA configuration found<BR> [ 0.000000] Faking a node at 0000000000000000-0000000138000000<BR> [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000<BR> [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]<BR> [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0<BR> [ 0.000000] Zone PFN ranges:<BR> [ 0.000000] DMA 0x00000010 -> 0x00001000<BR> [ 0.000000] DMA32 0x00001000 -> 0x00100000<BR> [ 0.000000] Normal 0x00100000 -> 0x00138000<BR> [ 0.000000] Movable zone start PFN for each node<BR> [ 0.000000] early_node_map[9] active PFN ranges<BR> [ 0.000000] 0: 0x00000010 -> 0x0000009c<BR> [ 0.000000] 0: 0x00000100 -> 0x000c727c<BR> [ 0.000000] 0: 0x000c7282 -> 0x000c73ea<BR> [ 0.000000] 0: 0x000c740f -> 0x000c746f<BR> [ 0.000000] 0: 0x000c770f -> 0x000c7717<BR> [ 0.000000] 0: 0x000c771f -> 0x000c7782<BR> [ 0.000000] 0: 0x000c779f -> 0x000c77e3<BR> [ 0.000000] 0: 0x000c77ff -> 0x000c7800<BR> [ 0.000000] 0: 0x00100000 -> 0x00138000<BR> [ 0.000000] On node 0 totalpages: 1045632<BR> [ 0.000000] DMA zone: 56 pages used for memmap<BR> [ 0.000000] DMA zone: 0 pages reserved<BR> [ 0.000000] DMA zone: 3924 pages, LIFO batch:0<BR> [ 0.000000] DMA32 zone: 14280 pages used for memmap<BR> [ 0.000000] DMA32 zone: 797996 pages, LIFO batch:31<BR> [ 0.000000] Normal zone: 3136 pages used for memmap<BR> [ 0.000000] Normal zone: 226240 pages, LIFO batch:31<BR> [ 0.000000] ACPI: PM-Timer IO Port: 0x408<BR> [ 0.000000] ACPI: Local APIC address 0xfee00000<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)<BR> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])<BR> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])<BR> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])<BR> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23<BR> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)<BR> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)<BR> [ 0.000000] ACPI: IRQ0 used by override.<BR> [ 0.000000] ACPI: IRQ2 used by override.<BR> [ 0.000000] ACPI: IRQ9 used by override.<BR> [ 0.000000] Using ACPI (MADT) for SMP configuration information<BR> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000<BR> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs<BR> [ 0.000000] nr_irqs_gsi: 40<BR> [ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff]<BR> [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000<BR> [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000<BR> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000<BR> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000<BR> [ 0.000000] early_res array is doubled to 128 at [1a800 - 1b7ff]<BR> [ 0.000000] PM: Registered nosave memory: 00000000c73ea000 - 00000000c740f000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c7717000 - 00000000c771f000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c7782000 - 00000000c779f000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c77e3000 - 00000000c77ff000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000<BR> [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000<BR> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000<BR> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f0e04000<BR> [ 0.000000] PM: Registered nosave memory: 00000000f0e04000 - 00000000f0e05000<BR> [ 0.000000] PM: Registered nosave memory: 00000000f0e05000 - 00000000feaff000<BR> [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000<BR> [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000<BR> [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000<BR> [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000<BR> [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:18000000)<BR> [ 0.000000] Booting paravirtualized kernel on bare hardware<BR> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1<BR> [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144<BR> [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152<BR> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 <BR> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028160<BR> [ 0.000000] Policy zone: Normal<BR> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=3be83d1d-2ecd-4406-80ec-5822c983da36 ro quiet splash<BR> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)<BR> [ 0.000000] Checking aperture...<BR> [ 0.000000] No AGP bridge found<BR> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area<BR> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!<BR> [ 0.000000] Subtract (84 early reservations)<BR> [ 0.000000] #1 [0001000000 - 0001d18114] TEXT DATA BSS<BR> [ 0.000000] #2 [0037571000 - 0037ff0000] RAMDISK<BR> [ 0.000000] #3 [0001d19000 - 0001d191e4] BRK<BR> [ 0.000000] #4 [00000f6860 - 0000100000] BIOS reserved<BR> [ 0.000000] #5 [00000f6850 - 00000f6860] MP-table mpf<BR> [ 0.000000] #6 [000009c400 - 000009c971] BIOS reserved<BR> [ 0.000000] #7 [000009cb35 - 00000f6850] BIOS reserved<BR> [ 0.000000] #8 [000009c971 - 000009cb35] MP-table mpc<BR> [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE<BR> [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP<BR> [ 0.000000] #11 [0000016000 - 0000019000] PGTABLE<BR> [ 0.000000] #12 [0000019000 - 000001a000] PGTABLE<BR> [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA<BR> [ 0.000000] #14 [0001d19200 - 0001d1a200] BOOTMEM<BR> [ 0.000000] #15 [0001d18140 - 0001d18440] BOOTMEM<BR> [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM<BR> [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM<BR> [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0<BR> [ 0.000000] #19 [0001d18440 - 0001d185c0] BOOTMEM<BR> [ 0.000000] #20 [0001d1a200 - 0001d32200] BOOTMEM<BR> [ 0.000000] #21 [0001d32200 - 0001d38200] BOOTMEM<BR> [ 0.000000] #22 [0001d39000 - 0001d3a000] BOOTMEM<BR> [ 0.000000] #23 [0001d185c0 - 0001d18601] BOOTMEM<BR> [ 0.000000] #24 [0001d18640 - 0001d18683] BOOTMEM<BR> [ 0.000000] #25 [0001d186c0 - 0001d18d18] BOOTMEM<BR> [ 0.000000] #26 [0001d18d40 - 0001d18da8] BOOTMEM<BR> [ 0.000000] #27 [0001d18dc0 - 0001d18e28] BOOTMEM<BR> [ 0.000000] #28 [0001d18e40 - 0001d18ea8] BOOTMEM<BR> [ 0.000000] #29 [0001d18ec0 - 0001d18f28] BOOTMEM<BR> [ 0.000000] #30 [0001d18f40 - 0001d18fa8] BOOTMEM<BR> [ 0.000000] #31 [0001d38200 - 0001d38268] BOOTMEM<BR> [ 0.000000] #32 [0001d38280 - 0001d382e8] BOOTMEM<BR> [ 0.000000] #33 [0001d38300 - 0001d38368] BOOTMEM<BR> [ 0.000000] #34 [0001d38380 - 0001d383e8] BOOTMEM<BR> [ 0.000000] #35 [0001d38400 - 0001d38468] BOOTMEM<BR> [ 0.000000] #36 [0001d38480 - 0001d384e8] BOOTMEM<BR> [ 0.000000] #37 [0001d38500 - 0001d38568] BOOTMEM<BR> [ 0.000000] #38 [0001d38580 - 0001d385e8] BOOTMEM<BR> [ 0.000000] #39 [0001d38600 - 0001d38668] BOOTMEM<BR> [ 0.000000] #40 [0001d38680 - 0001d386e8] BOOTMEM<BR> [ 0.000000] #41 [0001d38700 - 0001d38768] BOOTMEM<BR> [ 0.000000] #42 [0001d38780 - 0001d387e8] BOOTMEM<BR> [ 0.000000] #43 [0001d38800 - 0001d38868] BOOTMEM<BR> [ 0.000000] #44 [0001d38880 - 0001d388e8] BOOTMEM<BR> [ 0.000000] #45 [0001d38900 - 0001d38968] BOOTMEM<BR> [ 0.000000] #46 [0001d38980 - 0001d389e8] BOOTMEM<BR> [ 0.000000] #47 [0001d38a00 - 0001d38a68] BOOTMEM<BR> [ 0.000000] #48 [0001d38a80 - 0001d38ae8] BOOTMEM<BR> [ 0.000000] #49 [0001d38b00 - 0001d38b68] BOOTMEM<BR> [ 0.000000] #50 [0001d38b80 - 0001d38be8] BOOTMEM<BR> [ 0.000000] #51 [0001d38c00 - 0001d38c68] BOOTMEM<BR> [ 0.000000] #52 [0001d38c80 - 0001d38ce8] BOOTMEM<BR> [ 0.000000] #53 [0001d38d00 - 0001d38d68] BOOTMEM<BR> [ 0.000000] #54 [0001d18fc0 - 0001d18fe0] BOOTMEM<BR> [ 0.000000] #55 [0001d38d80 - 0001d38da0] BOOTMEM<BR> [ 0.000000] #56 [0001d38dc0 - 0001d38de0] BOOTMEM<BR> [ 0.000000] #57 [0001d38e00 - 0001d38e20] BOOTMEM<BR> [ 0.000000] #58 [0001d38e40 - 0001d38e60] BOOTMEM<BR> [ 0.000000] #59 [0001d38e80 - 0001d38ea0] BOOTMEM<BR> [ 0.000000] #60 [0001d38ec0 - 0001d38ee0] BOOTMEM<BR> [ 0.000000] #61 [0001d38f00 - 0001d38f20] BOOTMEM<BR> [ 0.000000] #62 [0001d38f40 - 0001d38faa] BOOTMEM<BR> [ 0.000000] #63 [0001d3a000 - 0001d3a06a] BOOTMEM<BR> [ 0.000000] #64 [0001e00000 - 0001e1e000] BOOTMEM<BR> [ 0.000000] #65 [0001e40000 - 0001e5e000] BOOTMEM<BR> [ 0.000000] #66 [0001e80000 - 0001e9e000] BOOTMEM<BR> [ 0.000000] #67 [0001ec0000 - 0001ede000] BOOTMEM<BR> [ 0.000000] #68 [0001f00000 - 0001f1e000] BOOTMEM<BR> [ 0.000000] #69 [0001f40000 - 0001f5e000] BOOTMEM<BR> [ 0.000000] #70 [0001f80000 - 0001f9e000] BOOTMEM<BR> [ 0.000000] #71 [0001fc0000 - 0001fde000] BOOTMEM<BR> [ 0.000000] #72 [0001d38fc0 - 0001d38fc8] BOOTMEM<BR> [ 0.000000] #73 [0001d3c080 - 0001d3c088] BOOTMEM<BR> [ 0.000000] #74 [0001d3c0c0 - 0001d3c0e0] BOOTMEM<BR> [ 0.000000] #75 [0001d3c100 - 0001d3c140] BOOTMEM<BR> [ 0.000000] #76 [0001d3c140 - 0001d3c260] BOOTMEM<BR> [ 0.000000] #77 [0001d3c280 - 0001d3c2c8] BOOTMEM<BR> [ 0.000000] #78 [0001d3c300 - 0001d3c348] BOOTMEM<BR> [ 0.000000] #79 [0001d3c380 - 0001d44380] BOOTMEM<BR> [ 0.000000] #80 [0001fde000 - 0005fde000] BOOTMEM<BR> [ 0.000000] #81 [0001d44380 - 0001d64380] BOOTMEM<BR> [ 0.000000] #82 [0001d64380 - 0001da4380] BOOTMEM<BR> [ 0.000000] #83 [000001b800 - 0000023800] BOOTMEM<BR> [ 0.000000] Memory: 4031820k/5111808k available (5716k kernel code, 929280k absent, 150708k reserved, 5375k data, 912k init)<BR> [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1<BR> [ 0.000000] Hierarchical RCU implementation.<BR> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.<BR> [ 0.000000] RCU-based detection of stalled CPUs is disabled.<BR> [ 0.000000] Verbose stalled-CPUs detection is disabled.<BR> [ 0.000000] NR_IRQS:4352 nr_irqs:744<BR> [ 0.000000] Extended CMOS year: 2000<BR> [ 0.000000] Console: colour VGA+ 80x25<BR> [ 0.000000] console [tty0] enabled<BR> [ 0.000000] allocated 41943040 bytes of page_cgroup<BR> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups<BR> [ 0.000000] hpet clockevent registered<BR> [ 0.000000] Fast TSC calibration using PIT<BR> [ 0.010000] Detected 1733.504 MHz processor.<BR> [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3467.00 BogoMIPS (lpj=17335040)<BR> [ 0.000010] pid_max: default: 32768 minimum: 301<BR> [ 0.000030] Security Framework initialized<BR> [ 0.000045] AppArmor: AppArmor initialized<BR> [ 0.000047] Yama: becoming mindful.<BR> [ 0.000504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)<BR> [ 0.001507] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)<BR> [ 0.001909] Mount-cache hash table entries: 256<BR> [ 0.002010] Initializing cgroup subsys ns<BR> [ 0.002014] Initializing cgroup subsys cpuacct<BR> [ 0.002018] Initializing cgroup subsys memory<BR> [ 0.002025] Initializing cgroup subsys devices<BR> [ 0.002027] Initializing cgroup subsys freezer<BR> [ 0.002029] Initializing cgroup subsys net_cls<BR> [ 0.002050] CPU: Physical Processor ID: 0<BR> [ 0.002052] CPU: Processor Core ID: 0<BR> [ 0.002057] mce: CPU supports 9 MCE banks<BR> [ 0.002066] CPU0: Thermal monitoring handled by SMI<BR> [ 0.002072] using mwait in idle threads.<BR> [ 0.002074] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.<BR> [ 0.002081] ... version: 3<BR> [ 0.002082] ... bit width: 48<BR> [ 0.002083] ... generic registers: 4<BR> [ 0.002085] ... value mask: 0000ffffffffffff<BR> [ 0.002087] ... max period: 000000007fffffff<BR> [ 0.002088] ... fixed-purpose events: 3<BR> [ 0.002090] ... event mask: 000000070000000f<BR> [ 0.004328] ACPI: Core revision 20100428<BR> [ 0.023951] ftrace: converting mcount calls to 0f 1f 44 00 00<BR> [ 0.023955] ftrace: allocating 22687 entries in 89 pages<BR> [ 0.032078] Setting APIC routing to flat<BR> [ 0.032415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1<BR> [ 0.132303] CPU0: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz stepping 05<BR> [ 0.248170] Booting Node 0, Processors #1<BR> [ 0.407874] CPU1: Thermal monitoring handled by SMI<BR> [ 0.427951] #2<BR> [ 0.587642] CPU2: Thermal monitoring handled by SMI<BR> [ 0.607733] #3<BR> [ 0.767409] CPU3: Thermal monitoring handled by SMI<BR> [ 0.787510] #4<BR> [ 0.947178] CPU4: Thermal monitoring handled by SMI<BR> [ 0.967301] #5<BR> [ 1.126943] CPU5: Thermal monitoring handled by SMI<BR> [ 1.147083] #6<BR> [ 1.306710] CPU6: Thermal monitoring handled by SMI<BR> [ 1.326864] #7 Ok.<BR> [ 1.486477] CPU7: Thermal monitoring handled by SMI<BR> [ 1.506484] Brought up 8 CPUs<BR> [ 1.506487] Total of 8 processors activated (27734.09 BogoMIPS).<BR> [ 1.510680] devtmpfs: initialized<BR> [ 1.511741] regulator: core version 0.5<BR> [ 1.511766] Time: 0:44:19 Date: 03/15/11<BR> [ 1.511795] NET: Registered protocol family 16<BR> [ 1.511880] Trying to unpack rootfs image as initramfs...<BR> [ 1.511897] ACPI: bus type pci registered<BR> [ 1.511965] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)<BR> [ 1.511969] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820<BR> [ 1.579277] PCI: Using configuration type 1 for base access<BR> [ 1.580091] bio: create slab <bio-0> at 0<BR> [ 1.582016] ACPI: EC: Look up EC in DSDT<BR> [ 1.590158] ACPI: BIOS _OSI(Linux) query ignored<BR> [ 1.591303] ACPI: SSDT 00000000c771ac18 00298 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)<BR> [ 1.591800] ACPI: Dynamic OEM Table Load:<BR> [ 1.591803] ACPI: SSDT (null) 00298 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)<BR> [ 1.592039] ACPI: SSDT 00000000c7718a18 00471 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)<BR> [ 1.592518] ACPI: Dynamic OEM Table Load:<BR> [ 1.592520] ACPI: SSDT (null) 00471 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)<BR> [ 1.593051] ACPI: SSDT 00000000c7719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)<BR> [ 1.593622] ACPI: Dynamic OEM Table Load:<BR> [ 1.593624] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)<BR> [ 1.593813] ACPI: SSDT 00000000c7717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)<BR> [ 1.594328] ACPI: Dynamic OEM Table Load:<BR> [ 1.594331] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)<BR> [ 1.598390] ACPI: EC: GPE storm detected, transactions will use polling mode<BR> [ 1.768534] Freeing initrd memory: 10748k freed<BR> [ 1.776302] ACPI: Interpreter enabled<BR> [ 1.776306] ACPI: (supports S0 S3 S4 S5)<BR> [ 1.776334] ACPI: Using IOAPIC for interrupt routing<BR> [ 1.776854] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function<BR> [ 1.861041] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function<BR> [ 1.946513] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62<BR> [ 1.946784] ACPI: No dock devices found.<BR> [ 1.946787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug<BR> [ 1.947657] \_SB_.PCI0:_OSC invalid UUID<BR> [ 1.947659] _OSC request data:1 8 1f <BR> [ 1.947664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])<BR> [ 1.948914] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]<BR> [ 1.948917] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]<BR> [ 1.948920] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]<BR> [ 1.948922] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]<BR> [ 1.948925] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]<BR> [ 1.948927] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]<BR> [ 1.948930] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]<BR> [ 1.948933] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xfeafffff]<BR> [ 1.949024] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold<BR> [ 1.949028] pci 0000:00:03.0: PME# disabled<BR> [ 1.949295] pci 0000:00:1a.0: reg 10: [mem 0xf0e06000-0xf0e063ff]<BR> [ 1.949349] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold<BR> [ 1.949353] pci 0000:00:1a.0: PME# disabled<BR> [ 1.949386] pci 0000:00:1b.0: reg 10: [mem 0xf0e00000-0xf0e03fff 64bit]<BR> [ 1.949427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold<BR> [ 1.949431] pci 0000:00:1b.0: PME# disabled<BR> [ 1.949494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold<BR> [ 1.949498] pci 0000:00:1c.0: PME# disabled<BR> [ 1.949563] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold<BR> [ 1.949567] pci 0000:00:1c.1: PME# disabled<BR> [ 1.949632] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold<BR> [ 1.949636] pci 0000:00:1c.3: PME# disabled<BR> [ 1.949701] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold<BR> [ 1.949704] pci 0000:00:1c.4: PME# disabled<BR> [ 1.949748] pci 0000:00:1d.0: reg 10: [mem 0xf0e06400-0xf0e067ff]<BR> [ 1.949802] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold<BR> [ 1.949806] pci 0000:00:1d.0: PME# disabled<BR> [ 1.949970] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]<BR> [ 1.949976] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]<BR> [ 1.949981] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]<BR> [ 1.949987] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]<BR> [ 1.949992] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]<BR> [ 1.949998] pci 0000:00:1f.2: reg 24: [mem 0xf0e05000-0xf0e057ff]<BR> [ 1.950029] pci 0000:00:1f.2: PME# supported from D3hot<BR> [ 1.950032] pci 0000:00:1f.2: PME# disabled<BR> [ 1.950059] pci 0000:00:1f.3: reg 10: [mem 0xf0e06800-0xf0e068ff 64bit]<BR> [ 1.950072] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]<BR> [ 1.950145] pci 0000:02:00.0: reg 10: [mem 0xce000000-0xceffffff]<BR> [ 1.950156] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]<BR> [ 1.950167] pci 0000:02:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]<BR> [ 1.950174] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f]<BR> [ 1.950181] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]<BR> [ 1.965976] pci 0000:00:03.0: PCI bridge to [bus 02-02]<BR> [ 1.965982] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]<BR> [ 1.965987] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff]<BR> [ 1.965995] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]<BR> [ 1.966099] pci 0000:03:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]<BR> [ 1.966193] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold<BR> [ 1.966199] pci 0000:03:00.0: PME# disabled<BR> [ 1.985956] pci 0000:00:1c.0: PCI bridge to [bus 03-04]<BR> [ 1.985960] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]<BR> [ 1.985964] pci 0000:00:1c.0: bridge window [mem 0xf0900000-0xf09fffff]<BR> [ 1.985969] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]<BR> [ 1.986010] pci 0000:00:1c.1: PCI bridge to [bus 05-06]<BR> [ 1.986014] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]<BR> [ 1.986018] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff]<BR> [ 1.986023] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]<BR> [ 1.986090] pci 0000:07:00.0: reg 10: [io 0x5000-0x50ff]<BR> [ 1.986110] pci 0000:07:00.0: reg 18: [mem 0xf0504000-0xf0504fff 64bit pref]<BR> [ 1.986124] pci 0000:07:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]<BR> [ 1.986133] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]<BR> [ 1.986172] pci 0000:07:00.0: supports D1 D2<BR> [ 1.986174] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold<BR> [ 1.986179] pci 0000:07:00.0: PME# disabled<BR> [ 2.005933] pci 0000:00:1c.3: PCI bridge to [bus 07-08]<BR> [ 2.005939] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]<BR> [ 2.005945] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]<BR> [ 2.005953] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]<BR> [ 2.006040] pci 0000:09:00.0: reg 10: [mem 0xf0b00800-0xf0b00fff]<BR> [ 2.006050] pci 0000:09:00.0: reg 14: [mem 0xf0b01000-0xf0b0107f]<BR> [ 2.006077] pci 0000:09:00.0: reg 20: [mem 0xf0b00400-0xf0b0047f]<BR> [ 2.006088] pci 0000:09:00.0: reg 24: [mem 0xf0b00000-0xf0b0007f]<BR> [ 2.006184] pci 0000:09:00.1: reg 10: [mem 0xf0b01400-0xf0b014ff]<BR> [ 2.006307] pci 0000:09:00.2: reg 10: [mem 0xf0b01800-0xf0b018ff]<BR> [ 2.006429] pci 0000:09:00.3: reg 10: [mem 0xf0b01c00-0xf0b01cff]<BR> [ 2.025913] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]<BR> [ 2.025917] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]<BR> [ 2.025921] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0bfffff]<BR> [ 2.025927] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]<BR> [ 2.025987] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)<BR> [ 2.025992] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)<BR> [ 2.025996] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)<BR> [ 2.026002] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)<BR> [ 2.026004] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)<BR> [ 2.026007] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)<BR> [ 2.026009] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)<BR> [ 2.026012] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)<BR> [ 2.026014] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)<BR> [ 2.026016] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)<BR> [ 2.026019] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)<BR> [ 2.026021] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfeafffff] (subtractive decode)<BR> [ 2.026050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]<BR> [ 2.026338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]<BR> [ 2.026594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]<BR> [ 2.026748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]<BR> [ 2.026904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]<BR> [ 2.027066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]<BR> [ 2.027285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]<BR> [ 2.027556] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.027558] _OSC request data:1 1f 1f <BR> [ 2.046430] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])<BR> [ 2.047393] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11<BR> [ 2.047519] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10<BR> [ 2.047642] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)<BR> [ 2.047765] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)<BR> [ 2.047887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.<BR> [ 2.048010] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.<BR> [ 2.048133] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)<BR> [ 2.048255] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)<BR> [ 2.048314] HEST: Table is not found!<BR> [ 2.048388] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none<BR> [ 2.048398] vgaarb: loaded<BR> [ 2.048521] SCSI subsystem initialized<BR> [ 2.048657] libata version 3.00 loaded.<BR> [ 2.048703] usbcore: registered new interface driver usbfs<BR> [ 2.048713] usbcore: registered new interface driver hub<BR> [ 2.048731] usbcore: registered new device driver usb<BR> [ 2.049027] ACPI: WMI: Mapper loaded<BR> [ 2.049029] PCI: Using ACPI for IRQ routing<BR> [ 2.049031] PCI: pci_cache_line_size set to 64 bytes<BR> [ 2.049150] reserve RAM buffer: 000000000009c400 - 000000000009ffff <BR> [ 2.049152] reserve RAM buffer: 00000000c727c000 - 00000000c7ffffff <BR> [ 2.049157] reserve RAM buffer: 00000000c73ea000 - 00000000c7ffffff <BR> [ 2.049161] reserve RAM buffer: 00000000c746f000 - 00000000c7ffffff <BR> [ 2.049165] reserve RAM buffer: 00000000c7717000 - 00000000c7ffffff <BR> [ 2.049168] reserve RAM buffer: 00000000c7782000 - 00000000c7ffffff <BR> [ 2.049170] reserve RAM buffer: 00000000c77e3000 - 00000000c7ffffff <BR> [ 2.049173] reserve RAM buffer: 00000000c7800000 - 00000000c7ffffff <BR> [ 2.049252] NetLabel: Initializing<BR> [ 2.049253] NetLabel: domain hash size = 128<BR> [ 2.049255] NetLabel: protocols = UNLABELED CIPSOv4<BR> [ 2.049266] NetLabel: unlabeled traffic allowed by default<BR> [ 2.049299] alloc irq_desc for 40 on node -1<BR> [ 2.049300] alloc kstat_irqs on node -1<BR> [ 2.049307] alloc irq_desc for 41 on node -1<BR> [ 2.049309] alloc kstat_irqs on node -1<BR> [ 2.049313] alloc irq_desc for 42 on node -1<BR> [ 2.049315] alloc kstat_irqs on node -1<BR> [ 2.049318] alloc irq_desc for 43 on node -1<BR> [ 2.049320] alloc kstat_irqs on node -1<BR> [ 2.049323] alloc irq_desc for 44 on node -1<BR> [ 2.049325] alloc kstat_irqs on node -1<BR> [ 2.049328] HPET: 8 timers in total, 5 timers will be used for per-cpu timer<BR> [ 2.049335] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0<BR> [ 2.049342] hpet0: 8 comparators, 64-bit 14.318180 MHz counter<BR> [ 2.055806] hpet: hpet2 irq 40 for MSI<BR> [ 2.055867] hpet: hpet3 irq 41 for MSI<BR> [ 2.065871] hpet: hpet4 irq 42 for MSI<BR> [ 2.075867] hpet: hpet5 irq 43 for MSI<BR> [ 2.085878] hpet: hpet6 irq 44 for MSI<BR> [ 2.105822] Switching to clocksource tsc<BR> [ 2.113437] AppArmor: AppArmor Filesystem Enabled<BR> [ 2.113445] pnp: PnP ACPI init<BR> [ 2.113455] ACPI: bus type pnp registered<BR> [ 2.147922] pnp: PnP ACPI: found 11 devices<BR> [ 2.147924] ACPI: ACPI bus type pnp unregistered<BR> [ 2.147934] system 00:05: [io 0x0680-0x069f] has been reserved<BR> [ 2.147940] system 00:05: [io 0x0500-0x050f] has been reserved<BR> [ 2.147942] system 00:05: [io 0x0600-0x0603] has been reserved<BR> [ 2.147945] system 00:05: [io 0xffff] has been reserved<BR> [ 2.147947] system 00:05: [io 0x0400-0x047f] has been reserved<BR> [ 2.147950] system 00:05: [io 0x1180-0x11ff] has been reserved<BR> [ 2.147952] system 00:05: [io 0x164e-0x164f] has been reserved<BR> [ 2.147955] system 00:05: [io 0xfe00] has been reserved<BR> [ 2.147961] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved<BR> [ 2.147965] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved<BR> [ 2.147968] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved<BR> [ 2.147971] system 00:09: [mem 0xf0e04000-0xf0e04fff] has been reserved<BR> [ 2.147973] system 00:09: [mem 0xc8000000-0xc8000fff] has been reserved<BR> [ 2.147976] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved<BR> [ 2.147979] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved<BR> [ 2.147981] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved<BR> [ 2.147984] system 00:09: [mem 0xff000000-0xffffffff] has been reserved<BR> [ 2.147987] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved<BR> [ 2.153713] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)<BR> [ 2.153716] pci 0000:00:03.0: PCI bridge to [bus 02-02]<BR> [ 2.153719] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]<BR> [ 2.153723] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff]<BR> [ 2.153726] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]<BR> [ 2.153732] pci 0000:00:1c.0: PCI bridge to [bus 03-04]<BR> [ 2.153734] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]<BR> [ 2.153739] pci 0000:00:1c.0: bridge window [mem 0xf0900000-0xf09fffff]<BR> [ 2.153743] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]<BR> [ 2.153749] pci 0000:00:1c.1: PCI bridge to [bus 05-06]<BR> [ 2.153752] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]<BR> [ 2.153756] pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf08fffff]<BR> [ 2.153760] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]<BR> [ 2.153767] pci 0000:07:00.0: BAR 6: assigned [mem 0xf0420000-0xf043ffff pref]<BR> [ 2.153769] pci 0000:00:1c.3: PCI bridge to [bus 07-08]<BR> [ 2.153772] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]<BR> [ 2.153777] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]<BR> [ 2.153781] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]<BR> [ 2.153787] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]<BR> [ 2.153790] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]<BR> [ 2.153795] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0bfffff]<BR> [ 2.153799] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]<BR> [ 2.153804] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]<BR> [ 2.153806] pci 0000:00:1e.0: bridge window [io disabled]<BR> [ 2.153810] pci 0000:00:1e.0: bridge window [mem disabled]<BR> [ 2.153814] pci 0000:00:1e.0: bridge window [mem pref disabled]<BR> [ 2.153825] alloc irq_desc for 16 on node -1<BR> [ 2.153827] alloc kstat_irqs on node -1<BR> [ 2.153832] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 2.153836] pci 0000:00:03.0: setting latency timer to 64<BR> [ 2.153844] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 2.153848] pci 0000:00:1c.0: setting latency timer to 64<BR> [ 2.153858] alloc irq_desc for 17 on node -1<BR> [ 2.153859] alloc kstat_irqs on node -1<BR> [ 2.153863] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17<BR> [ 2.153867] pci 0000:00:1c.1: setting latency timer to 64<BR> [ 2.153874] alloc irq_desc for 19 on node -1<BR> [ 2.153875] alloc kstat_irqs on node -1<BR> [ 2.153879] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19<BR> [ 2.153883] pci 0000:00:1c.3: setting latency timer to 64<BR> [ 2.153890] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 2.153894] pci 0000:00:1c.4: setting latency timer to 64<BR> [ 2.153900] pci 0000:00:1e.0: setting latency timer to 64<BR> [ 2.153904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]<BR> [ 2.153906] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]<BR> [ 2.153908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]<BR> [ 2.153910] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]<BR> [ 2.153913] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]<BR> [ 2.153915] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]<BR> [ 2.153917] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]<BR> [ 2.153919] pci_bus 0000:00: resource 11 [mem 0xc8000000-0xfeafffff]<BR> [ 2.153921] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]<BR> [ 2.153923] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xceffffff]<BR> [ 2.153926] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]<BR> [ 2.153928] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]<BR> [ 2.153930] pci_bus 0000:03: resource 1 [mem 0xf0900000-0xf09fffff]<BR> [ 2.153932] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]<BR> [ 2.153935] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]<BR> [ 2.153937] pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf08fffff]<BR> [ 2.153939] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]<BR> [ 2.153941] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]<BR> [ 2.153943] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]<BR> [ 2.153945] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]<BR> [ 2.153948] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]<BR> [ 2.153950] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0bfffff]<BR> [ 2.153952] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]<BR> [ 2.153954] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]<BR> [ 2.153956] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]<BR> [ 2.153958] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]<BR> [ 2.153961] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000d3fff]<BR> [ 2.153963] pci_bus 0000:0b: resource 8 [mem 0x000d4000-0x000d7fff]<BR> [ 2.153965] pci_bus 0000:0b: resource 9 [mem 0x000d8000-0x000dbfff]<BR> [ 2.153967] pci_bus 0000:0b: resource 10 [mem 0x000dc000-0x000dffff]<BR> [ 2.153969] pci_bus 0000:0b: resource 11 [mem 0xc8000000-0xfeafffff]<BR> [ 2.153997] NET: Registered protocol family 2<BR> [ 2.154144] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)<BR> [ 2.155178] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)<BR> [ 2.158264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)<BR> [ 2.158634] TCP: Hash tables configured (established 524288 bind 65536)<BR> [ 2.158637] TCP reno registered<BR> [ 2.158648] UDP hash table entries: 2048 (order: 4, 65536 bytes)<BR> [ 2.158690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)<BR> [ 2.158801] NET: Registered protocol family 1<BR> [ 2.158908] pci 0000:02:00.0: Boot video device<BR> [ 2.158952] PCI: CLS 64 bytes, default 64<BR> [ 2.158954] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)<BR> [ 2.158957] Placing 64MB software IO TLB between ffff880001fde000 - ffff880005fde000<BR> [ 2.158959] software IO TLB at phys 0x1fde000 - 0x5fde000<BR> [ 2.159403] Scanning for low memory corruption every 60 seconds<BR> [ 2.159509] audit: initializing netlink socket (disabled)<BR> [ 2.159516] type=2000 audit(1300149859.980:1): initialized<BR> [ 2.175509] HugeTLB registered 2 MB page size, pre-allocated 0 pages<BR> [ 2.176961] VFS: Disk quotas dquot_6.5.2<BR> [ 2.177017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)<BR> [ 2.177569] fuse init (API version 7.14)<BR> [ 2.177658] msgmni has been set to 7895<BR> [ 2.179739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)<BR> [ 2.179741] io scheduler noop registered<BR> [ 2.179743] io scheduler deadline registered<BR> [ 2.179780] io scheduler cfq registered (default)<BR> [ 2.179891] pcieport 0000:00:03.0: setting latency timer to 64<BR> [ 2.179916] alloc irq_desc for 45 on node -1<BR> [ 2.179918] alloc kstat_irqs on node -1<BR> [ 2.179926] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X<BR> [ 2.179984] pcieport 0000:00:1c.0: setting latency timer to 64<BR> [ 2.180013] alloc irq_desc for 46 on node -1<BR> [ 2.180017] alloc kstat_irqs on node -1<BR> [ 2.180024] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X<BR> [ 2.180086] pcieport 0000:00:1c.1: setting latency timer to 64<BR> [ 2.180115] alloc irq_desc for 47 on node -1<BR> [ 2.180117] alloc kstat_irqs on node -1<BR> [ 2.180124] pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X<BR> [ 2.180189] pcieport 0000:00:1c.3: setting latency timer to 64<BR> [ 2.180219] alloc irq_desc for 48 on node -1<BR> [ 2.180220] alloc kstat_irqs on node -1<BR> [ 2.180227] pcieport 0000:00:1c.3: irq 48 for MSI/MSI-X<BR> [ 2.180289] pcieport 0000:00:1c.4: setting latency timer to 64<BR> [ 2.180319] alloc irq_desc for 49 on node -1<BR> [ 2.180320] alloc kstat_irqs on node -1<BR> [ 2.180327] pcieport 0000:00:1c.4: irq 49 for MSI/MSI-X<BR> [ 2.180517] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180519] _OSC request data:1 0 1f <BR> [ 2.180523] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed<BR> [ 2.180543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5<BR> [ 2.180642] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180644] _OSC request data:1 0 1f <BR> [ 2.180753] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180755] _OSC request data:1 0 1f <BR> [ 2.180863] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180864] _OSC request data:1 0 1f <BR> [ 2.180972] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.180974] _OSC request data:1 0 1f <BR> [ 2.181095] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181097] _OSC request data:1 0 1f <BR> [ 2.181204] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181206] _OSC request data:1 0 1f <BR> [ 2.181313] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181315] _OSC request data:1 0 1f <BR> [ 2.181422] \_SB_.PCI0:_OSC invalid UUID<BR> [ 2.181423] _OSC request data:1 0 1f <BR> [ 2.181445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4<BR> [ 2.181514] intel_idle: MWAIT substates: 0x1120<BR> [ 2.181516] intel_idle: v0.4 model 0x1E<BR> [ 2.181517] intel_idle: lapic_timer_reliable_states 0x2<BR> [ 2.215821] ACPI: AC Adapter [AC] (on-line)<BR> [ 2.215897] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0<BR> [ 2.215904] ACPI: Power Button [PWRB]<BR> [ 2.215937] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1<BR> [ 2.215941] ACPI: Sleep Button [SLPB]<BR> [ 2.215975] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2<BR> [ 2.285709] ACPI: Lid Switch [LID0]<BR> [ 2.285753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3<BR> [ 2.285757] ACPI: Power Button [PWRF]<BR> [ 2.286414] ACPI: acpi_idle yielding to intel_idle<BR> [ 4.962489] thermal LNXTHERM:01: registered as thermal_zone0<BR> [ 4.962499] ACPI: Thermal Zone [TZ0] (52 C)<BR> [ 4.962564] ERST: Table is not found!<BR> [ 5.002577] Linux agpgart interface v0.103<BR> [ 5.002597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled<BR> [ 5.003761] brd: module loaded<BR> [ 5.004191] loop: module loaded<BR> [ 5.004583] Fixed MDIO Bus: probed<BR> [ 5.004609] PPP generic driver version 2.4.2<BR> [ 5.004638] tun: Universal TUN/TAP device driver, 1.6<BR> [ 5.004640] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><BR> [ 5.004703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<BR> [ 5.004722] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 5.004739] ehci_hcd 0000:00:1a.0: setting latency timer to 64<BR> [ 5.004742] ehci_hcd 0000:00:1a.0: EHCI Host Controller<BR> [ 5.004772] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1<BR> [ 5.004798] ehci_hcd 0000:00:1a.0: debug port 2<BR> [ 5.008717] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported<BR> [ 5.008732] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0e06000<BR> [ 5.024218] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00<BR> [ 5.024343] hub 1-0:1.0: USB hub found<BR> [ 5.024347] hub 1-0:1.0: 3 ports detected<BR> [ 5.024407] alloc irq_desc for 23 on node -1<BR> [ 5.024409] alloc kstat_irqs on node -1<BR> [ 5.024414] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23<BR> [ 5.024427] ehci_hcd 0000:00:1d.0: setting latency timer to 64<BR> [ 5.024430] ehci_hcd 0000:00:1d.0: EHCI Host Controller<BR> [ 5.024462] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2<BR> [ 5.024485] ehci_hcd 0000:00:1d.0: debug port 2<BR> [ 5.028419] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported<BR> [ 5.028432] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0e06400<BR> [ 5.044194] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00<BR> [ 5.044310] hub 2-0:1.0: USB hub found<BR> [ 5.044314] hub 2-0:1.0: 3 ports detected<BR> [ 5.044374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<BR> [ 5.044386] uhci_hcd: USB Universal Host Controller Interface driver<BR> [ 5.044473] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12<BR> [ 5.048199] i8042.c: Detected active multiplexing controller, rev 1.1.<BR> [ 5.050663] serio: i8042 KBD port at 0x60,0x64 irq 1<BR> [ 5.050669] serio: i8042 AUX0 port at 0x60,0x64 irq 12<BR> [ 5.050671] serio: i8042 AUX1 port at 0x60,0x64 irq 12<BR> [ 5.050674] serio: i8042 AUX2 port at 0x60,0x64 irq 12<BR> [ 5.050677] serio: i8042 AUX3 port at 0x60,0x64 irq 12<BR> [ 5.050731] mice: PS/2 mouse device common for all mice<BR> [ 5.050869] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0<BR> [ 5.050894] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs<BR> [ 5.050980] device-mapper: uevent: version 1.0.3<BR> [ 5.051049] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]<BR> [ 5.051190] device-mapper: multipath: version 1.1.1 loaded<BR> [ 5.051192] device-mapper: multipath round-robin: version 1.0.0 loaded<BR> [ 5.051663] cpuidle: using governor ladder<BR> [ 5.051951] cpuidle: using governor menu<BR> [ 5.052201] TCP cubic registered<BR> [ 5.052316] NET: Registered protocol family 10<BR> [ 5.052845] lo: Disabled Privacy Extensions<BR> [ 5.053161] NET: Registered protocol family 17<BR> [ 5.088241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4<BR> [ 5.342085] usb 1-1: new high speed USB device using ehci_hcd and address 2<BR> [ 5.492734] hub 1-1:1.0: USB hub found<BR> [ 5.492937] hub 1-1:1.0: 6 ports detected<BR> [ 5.611747] usb 2-1: new high speed USB device using ehci_hcd and address 2<BR> [ 5.763501] hub 2-1:1.0: USB hub found<BR> [ 5.763720] hub 2-1:1.0: 8 ports detected<BR> [ 5.841735] usb 1-1.1: new high speed USB device using ehci_hcd and address 3<BR> [ 6.114587] PM: Resume from disk failed.<BR> [ 6.114592] registered taskstats version 1<BR> [ 6.114890] Magic number: 3:787:708<BR> [ 6.115045] rtc_cmos 00:06: setting system clock to 2011-03-15 00:44:24 UTC (1300149864)<BR> [ 6.115050] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found<BR> [ 6.115053] EDD information not available.<BR> [ 6.115135] Freeing unused kernel memory: 912k freed<BR> [ 6.115261] Write protecting the kernel read-only data: 10240k<BR> [ 6.115503] Freeing unused kernel memory: 408k freed<BR> [ 6.115781] Freeing unused kernel memory: 1644k freed<BR> [ 6.131219] udev[147]: starting version 163<BR> [ 6.192431] usb 1-1.3: new full speed USB device using ehci_hcd and address 4<BR> [ 6.371075] usb 2-1.4: new low speed USB device using ehci_hcd and address 3<BR> [ 6.497621] usbcore: registered new interface driver hiddev<BR> [ 6.500435] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5<BR> [ 6.500489] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0<BR> [ 6.502774] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1<BR> [ 6.502800] usbcore: registered new interface driver usbhid<BR> [ 6.502803] usbhid: USB HID core driver<BR> [ 6.730813] ACPI: Battery Slot [BAT] (battery present)<BR> [ 7.420989] ahci 0000:00:1f.2: version 3.0<BR> [ 7.421006] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19<BR> [ 7.421062] alloc irq_desc for 50 on node -1<BR> [ 7.421065] alloc kstat_irqs on node -1<BR> [ 7.421077] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X<BR> [ 7.421113] ahci: SSS flag set, parallel bus scan disabled<BR> [ 7.423493] sdhci: Secure Digital Host Controller Interface driver<BR> [ 7.423497] sdhci: Copyright(c) Pierre Ossman<BR> [ 7.425733] sdhci-pci 0000:09:00.1: SDHCI controller found [197b:2382] (rev 0)<BR> [ 7.425754] sdhci-pci 0000:09:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.425837] sdhci-pci 0000:09:00.1: setting latency timer to 64<BR> [ 7.425876] Registered led device: mmc0::<BR> [ 7.425913] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA<BR> [ 7.425927] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 0)<BR> [ 7.425946] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.425954] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.<BR> [ 7.425962] sdhci-pci 0000:09:00.2: PCI INT A disabled<BR> [ 7.432588] firewire_ohci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 7.432596] firewire_ohci 0000:09:00.0: setting latency timer to 64<BR> [ 7.432916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded<BR> [ 7.432933] r8169 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19<BR> [ 7.432979] r8169 0000:07:00.0: setting latency timer to 64<BR> [ 7.433024] alloc irq_desc for 51 on node -1<BR> [ 7.433027] alloc kstat_irqs on node -1<BR> [ 7.433040] r8169 0000:07:00.0: irq 51 for MSI/MSI-X<BR> [ 7.433421] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc90000678000, 00:90:f5:9f:c4:46, XID 081000c0 IRQ 51<BR> [ 7.433958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode<BR> [ 7.433964] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst <BR> [ 7.433967] ahci 0000:00:1f.2: setting latency timer to 64<BR> [ 7.514200] scsi0 : ahci<BR> [ 7.514560] scsi1 : ahci<BR> [ 7.514814] scsi2 : ahci<BR> [ 7.515071] scsi3 : ahci<BR> [ 7.515289] scsi4 : ahci<BR> [ 7.515507] scsi5 : ahci<BR> [ 7.515603] ata1: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05100 irq 50<BR> [ 7.515608] ata2: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05180 irq 50<BR> [ 7.515613] ata3: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05200 irq 50<BR> [ 7.515617] ata4: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05280 irq 50<BR> [ 7.515622] ata5: SATA max UDMA/133 abar m2048@0xf0e05000 port 0xf0e05300 irq 50<BR> [ 7.515625] ata6: DUMMY<BR> [ 7.574237] firewire_ohci: isochronous cycle inconsistent<BR> [ 7.589422] firewire_ohci: Added fw-ohci device 0000:09:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x0<BR> [ 7.859077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)<BR> [ 7.861164] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133<BR> [ 7.861170] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)<BR> [ 7.863729] ata1.00: configured for UDMA/133<BR> [ 7.879220] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5<BR> [ 7.879389] sd 0:0:0:0: Attached scsi generic sg0 type 0<BR> [ 7.879480] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)<BR> [ 7.879567] sd 0:0:0:0: [sda] Write Protect is off<BR> [ 7.879573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<BR> [ 7.879627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA<BR> [ 7.879931] sda: sda1 sda2 < sda5 ><BR> [ 7.938345] sd 0:0:0:0: [sda] Attached SCSI disk<BR> [ 8.068832] firewire_core: created device fw0: GUID ffe473fffffffffe, S400<BR> [ 8.077935] firewire_core: created device fw1: GUID 00804580112bc4b8, S100<BR> [ 8.077941] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 8.090971] firewire_core: skipped bus generations, destroying all nodes<BR> [ 8.588178] firewire_core: rediscovered device fw0<BR> [ 8.628143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<BR> [ 8.640929] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100<BR> [ 8.656222] ata2.00: configured for UDMA/100<BR> [ 8.670535] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5<BR> [ 8.686834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<BR> [ 8.686839] Uniform CD-ROM driver Revision: 3.20<BR> [ 8.686968] sr 1:0:0:0: Attached scsi CD-ROM sr0<BR> [ 8.687031] sr 1:0:0:0: Attached scsi generic sg1 type 5<BR> [ 9.038855] ata3: SATA link down (SStatus 0 SControl 300)<BR> [ 9.407224] ata4: SATA link down (SStatus 0 SControl 300)<BR> [ 9.779888] ata5: SATA link down (SStatus 0 SControl 300)<BR> [ 10.261803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)<BR> [ 18.336349] Adding 11852796k swap on /dev/sda5. Priority:-1 extents:1 across:11852796k <BR> [ 18.430763] udev[514]: starting version 163<BR> [ 18.439616] lp: driver loaded but no devices found<BR> [ 18.451867] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS<BR> [ 18.452242] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function<BR> [ 18.608848] acpi device:48: registered as cooling_device8<BR> [ 18.609343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input6<BR> [ 18.609388] ACPI: Video Device [MXM3] (multi-head: yes rom: no post: no)<BR> [ 18.870991] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro<BR> [ 19.100275] type=1400 audit(1300149877.496:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=678 comm="apparmor_parser"<BR> [ 19.100633] type=1400 audit(1300149877.496:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"<BR> [ 19.100828] type=1400 audit(1300149877.496:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"<BR> [ 19.157456] r8169 0000:07:00.0: eth0: link down<BR> [ 19.157830] ADDRCONF(NETDEV_UP): eth0: link is not ready<BR> [ 19.287371] EDAC MC: Ver: 2.1.0 Feb 22 2011<BR> [ 19.304523] cfg80211: Calling CRDA to update world regulatory domain<BR> [ 19.308610] nvidia: module license 'NVIDIA' taints kernel.<BR> [ 19.308613] Disabling lock debugging due to kernel taint<BR> [ 19.308626] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50<BR> [ 19.309779] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.309787] jmb38x_ms 0000:09:00.3: setting latency timer to 64<BR> [ 19.329597] cfg80211: World regulatory domain updated:<BR> [ 19.329599] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)<BR> [ 19.329602] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329605] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329607] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329609] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.329611] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)<BR> [ 19.356230] Linux video capture interface: v2.00<BR> [ 19.364467] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0343)<BR> [ 19.367023] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7<BR> [ 19.367094] usbcore: registered new interface driver uvcvideo<BR> [ 19.367097] USB Video Class driver (v0.1.0)<BR> [ 19.393734] type=1400 audit(1300149877.786:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1122 comm="apparmor_parser"<BR> [ 19.394904] type=1400 audit(1300149877.786:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1116 comm="apparmor_parser"<BR> [ 19.394969] type=1400 audit(1300149877.786:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser"<BR> [ 19.395466] type=1400 audit(1300149877.786:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser"<BR> [ 19.395530] type=1400 audit(1300149877.786:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1120 comm="apparmor_parser"<BR> [ 19.395769] type=1400 audit(1300149877.786:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1116 comm="apparmor_parser"<BR> [ 19.413938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:<BR> [ 19.413941] iwlagn: Copyright(c) 2003-2010 Intel Corporation<BR> [ 19.413992] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.414000] iwlagn 0000:03:00.0: setting latency timer to 64<BR> [ 19.414046] iwlagn 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24<BR> [ 19.435222] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels<BR> [ 19.435274] alloc irq_desc for 52 on node -1<BR> [ 19.435276] alloc kstat_irqs on node -1<BR> [ 19.435293] iwlagn 0000:03:00.0: irq 52 for MSI/MSI-X<BR> [ 19.448365] alloc irq_desc for 22 on node -1<BR> [ 19.448367] alloc kstat_irqs on node -1<BR> [ 19.448373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22<BR> [ 19.448486] alloc irq_desc for 53 on node -1<BR> [ 19.448488] alloc kstat_irqs on node -1<BR> [ 19.448497] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X<BR> [ 19.448517] HDA Intel 0000:00:1b.0: setting latency timer to 64<BR> [ 19.493459] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12<BR> [ 19.499857] phy0: Selected rate control algorithm 'iwl-agn-rs'<BR> [ 19.676282] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<BR> [ 19.676288] nvidia 0000:02:00.0: setting latency timer to 64<BR> [ 19.676292] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem<BR> [ 19.676415] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010<BR> [ 19.747338] ADDRCONF(NETDEV_UP): wlan0: link is not ready<BR> [ 19.773233] Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 2<BR> [ 19.828348] ppdev: user-space parallel port driver<BR> [ 20.190409] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio4/input/input8<BR> [ 21.237792] vboxdrv: Found 8 processor cores.<BR> [ 21.237839] VBoxDrv: dbg - g_abExecMemory=ffffffffa0de05e0<BR> [ 21.238190] vboxdrv: fAsync=0 offMin=0x1bb offMax=0xbaf4<BR> [ 21.238224] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.<BR> [ 21.238226] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).<BR> [ 23.375210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0<BR> [ 25.530241] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0<BR> [ 39.840376] firewire_core: giving up on config rom for node id ffc1<BR> [ 39.840384] firewire_core: phy config: card 0, new root=ffc0, gap_count=5<BR> [ 39.864710] firewire_core: skipped bus generations, destroying all nodes<BR> [ 40.363665] firewire_core: rediscovered device fw0<BR> [ 40.459771] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 40.484001] firewire_core: skipped bus generations, destroying all nodes<BR> [ 40.979176] firewire_core: rediscovered device fw0<BR> [ 40.990075] firewire_core: created device fw1: GUID 00804580112bc4b8, S100<BR> [ 40.990080] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 41.013281] firewire_core: skipped bus generations, destroying all nodes<BR> [ 41.508513] firewire_core: rediscovered device fw0<BR> [ 41.608378] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 41.628887] firewire_core: skipped bus generations, destroying all nodes<BR> [ 42.127785] firewire_core: rediscovered device fw0<BR> [ 42.227641] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 42.251858] firewire_core: skipped bus generations, destroying all nodes<BR> [ 42.746973] firewire_core: rediscovered device fw0<BR> [ 42.846850] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 42.868590] firewire_core: skipped bus generations, destroying all nodes<BR> [ 43.366305] firewire_core: rediscovered device fw0<BR> [ 43.466171] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 43.490404] firewire_core: skipped bus generations, destroying all nodes<BR> [ 43.509859] firewire_core: giving up on config rom for node id ffc0<BR> [ 43.985543] firewire_core: rediscovered device fw0<BR> [ 44.085402] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 44.109636] firewire_core: skipped bus generations, destroying all nodes<BR> [ 44.604784] firewire_core: rediscovered device fw0<BR> [ 44.614784] firewire_core: giving up on config rom for node id ffc0<BR> [ 44.704648] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 44.728901] firewire_core: skipped bus generations, destroying all nodes<BR> [ 45.224039] firewire_core: rediscovered device fw0<BR> [ 45.323910] firewire_core: phy config: card 0, new root=ffc1, gap_count=5<BR> [ 45.348161] firewire_core: skipped bus generations, destroying all nodes<BR> [ 45.367636] firewire_core: giving up on config rom for node id ffc0<BR> [ 45.843316] firewire_core: rediscovered device fw0<BR> [ 45.851031] firewire_core: rediscovered device fw1<BR> [ 45.857031] firewire_core: giving up on config rom for node id ffc0<BR> [ 46.472533] firewire_core: giving up on config rom for node id ffc0<BR> [ 47.091801] firewire_core: giving up on config rom for node id ffc0<BR> [ 47.711022] firewire_core: giving up on config rom for node id ffc0<BR> [ 48.330300] firewire_core: giving up on config rom for node id ffc0<BR> [ 110.108578] wlan0: authenticate with 00:14:bf:46:34:dc (try 1)<BR> [ 110.111652] wlan0: authenticated<BR> [ 110.111696] wlan0: associate with 00:14:bf:46:34:dc (try 1)<BR> [ 110.114056] wlan0: RX AssocResp from 00:14:bf:46:34:dc (capab=0x411 status=0 aid=2)<BR> [ 110.114062] wlan0: associated<BR> [ 110.117318] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<BR> [ 111.147459] Intel AES-NI instructions are not detected.<BR> [ 111.230736] padlock: VIA PadLock not detected.<BR> [ 120.816438] wlan0: no IPv6 routers present<BR> <A HREF="mailto:reid@rsv-linux">reid@rsv-linux</A>:~$ <BR> <BR> <BR> <BR> </BODY> </HTML> --=-xdVI6roPTa8PGoOza9uz-- --===============3456009896198750014== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d --===============3456009896198750014== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Kino-dev mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kino-dev --===============3456009896198750014==--