Re: [ACPI-sppt] Problem with Presario S3200NX

Hi

you saw the same thing in dmesg with pci=noacpi 
if so look like pci=noacpi doesn't has really been active .

you can try to see if DSDT has problems.
Get last iasl (ACPI CA - Unix Build Environment )in
http://developer.intel.com/technology/iapc/acpi/downloads.htm
 cd compiler;make
after this
cat /proc/acpi/dsdt > acpi_dsdt.dat
./iasl  -d acpi_dsdt.dat
./iasl -tc acpi_dsdt.dsl

and see your dsdt in bios are ok or not.
if not tell me an will try to fix it.

what is ACPI sub system date?
this seems an old bug.

bye

On Sat, 2003-06-28 at 16:26, Corbeil Luc wrote:
> Hi Sergio and Stefan,
> 
> Sorry for the later answer, I finally found some time to experiment your 
> suggestions.
> The usb support in kernel config is set to M, it loads properly when 
> acpi=off .
> I tried loading it manually after it failed when acpi=on, but then 
> usb-uhci would
> not load afterwhile...
> 
> It looks like my PCI bus is screwed since USB doesn't load and furthermore,
> the ethernet interface doesn't start either. Weird...
> 
> I saw this using dmesg:
> 
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin A 
> of device 00:10.0 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin B 
> of device 00:10.1 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin C 
> of device 00:10.2 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin D 
> of device 00:10.3 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin A 
> of device 00:11.1 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin C 
> of device 00:11.5 - using IRQ 255
> Jun 28 10:06:19 localhost kernel: PCI: No IRQ known for interrupt pin A 
> of device 00:12.0
> Jun 28 10:06:19 localhost kernel: PCI: Using ACPI for IRQ routing
> Jun 28 10:06:19 localhost kernel: PCI: if you experience problems, try 
> using option 'pci=noacpi' or even 'acpi=off'
> 
> I tried with pci=noacpi but still got the problem with my PCI bus. For 
> the moment,
> I have to stick with acpi=off ;-(
> 
> I would gladly include the full result of dmesg or boot.log if that is 
> needed to gather more
> information.
> 
> Many thanks,
> 
> Luc.
> 
> 
> Sérgio Monteiro Basto wrote:
> 
> >Can be usb support in kernel configuration
> >fisrt item (support for usb) should be Y 
> >if you compile with M
> >you can try first:
> >insmod usbcore
> >and after insmod usb-uhci
> >
> >  
> >
> 
-- 
SérgioMB
email: [email protected]

Who gives me one shell, give me everything.



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01