Re: [ACPI-sppt] Can't Load Modules -- second attempt REALLY NEED HELP

Don't compile the acpi has modules
say Y 


On Wed, 2003-07-23 at 06:36, Vladimir Vanyukov wrote:
> Hey if anyone can offer me ANY help that would be AWESOME, I really 
> don't know what to do and really need to get this working.
> 
>    I recompiled my kernel with ACPI support, relaxed AML checking, and 
> debug statements compiled in the everything else as a module. I 
> recompiled the kernel and booted it, i get the following ACPI related 
> messages at boot up
> 
> bash# dmesg | grep ACPI
> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
> ACPI: have wakeup address 0xc0001000
> ACPI: RSDP (v000 PTLTD                      ) @ 0x000f7ed0
> ACPI: RSDT (v001 PTLTD    RSDT   01540.00000) @ 0x1fefb023
> ACPI: FADT (v001 ALI    M1533    01540.00000) @ 0x1fefee4c
> ACPI: BOOT (v001 PTLTD  $SBFTBL$ 01540.00000) @ 0x1fefeec0
> ACPI: SSDT (v001 PTLTD  POWERNOW 01540.00000) @ 0x1fefeee8
> ACPI: DSDT (v001 COMPAL      736 01540.00000) @ 0x00000000
> ACPI: BIOS passes blacklist
> ACPI: MADT not present
> ACPI: Subsystem revision 20030509
> tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
> ACPI Namespace successfully loaded at root c013c69c
> evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode 
> successful
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
> ACPI: PCI Root Bridge [PCI0] (00:00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11, disabled)
> ACPI: PCI Interrupt Link [LNKU] (IRQs *9)
> ACPI: Embedded Controller [EC0] (gpe 25)
> ACPI: Power Resource [PFAN] (off)
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> PCI: Using ACPI for IRQ routing
> 
> however when i try to lead the modules that I compiled i get a bunch of 
> errors for example here is the output of what happens when i try to load 
> the battery modules
> 
> bash# modprobe battery
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_bus_generate_event
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_ut_debug_print
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_ut_value_exit
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_os_free
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_bus_get_device
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_root_dir
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_install_notify_handler
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_ut_exit
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_extract_package
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_evaluate_object
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_bus_register_driver
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_ut_trace
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_bus_unregister_driver
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_get_handle
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_remove_notify_handler
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> unresolved symbol acpi_bus_get_status
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> insmod 
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o failed
> /lib/modules/2.4.20-wolk4.3s_withACPI/kernel/drivers/acpi/battery.o: 
> insmod battery failed
> 
> 
> Any help would be appriciated thanx.
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> _______________________________________________
> ACPI-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/acpi-support
-- 
Sérgio Basto




-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0