boot from USB-Floppy to install Debian

"Herziger, Tobias" <[email protected]>
Newsgroups gmane.linux.admin.managers
Message-ID <D16E3D13E0A3D111830F00805F0DC57D05C7A9B2@EXCHANGE>
Hi everyone,

i try to boot our new Blades from USB-Floppy but nothing works. i took
the debian resucue-disk and copied a customized 2.4.20-Kernel with
configuration shown on http://www.ozetechnology.com/howtos/C1VM_floppy.shtml
onto. the system boots but the Kernel cannot find root-fs on /dev/sdX
(Kernel Panic: VFS Unable to mount root fs)

when i tell syslinux to search for root-fs on /dev/fd0 following happens:

 VFS: Insert root floppy and press ENTER
 hub.c: new USB device 00:0f-2.1, assigned address 2
 Manufacturer: TEAC
 Product: TEAC-FD05PUB
 scsi1: SCSI emulation for USB Mass Storage devices
   [...]
 Attached scsi removable disk sda at scsi1, channel0, id 0, lun 0
 SCSI device sda: 2880 512-byte hdwr sectors (1MB)
 sda: Write protect is off
 Partition check:
    sda:(7)usb-storage:queuecommand() called
    sda1 sda2 sda3 sda4

 VFS: Cannot open root device "fd0" or 02:00
 Please append a corect "root=" boot option
 Kernel Panic: VFS: Unable to mount root fs on 02:00

When it tells me to insert root-fs en then press ENTER, it automatically
goes on with "usb.c: new USB device..."


Hardware is a DELL PE1655MCs
> Serverworks ServerSet LE 3.0 Chipset
> PERC4/im (LSI Logic MPT) with 2 Seagate 72G Cheetas

best regards,
Tobias Herziger (2003-05-15, 11:43)

--
CHIP Xonio Online GmbH, Technik-Team               tel: +49 89 74642-535
Poccistrasse 11                                    fax: +49 89 74642-274
80336 M|nchen                                   mobile: +49 160 97845853
_______________________________________________
LinuxManagers mailing list - http://www.linuxmanagers.org
submissions: LinuxManagers-35TzE1X9F6582KRnZfj+bdi2O/[email protected]
subscribe/unsubscribe: http://www.linuxmanagers.org/mailman/listinfo/linuxmanagers
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.