Re: DFE 570 TX not working.

Donald Becker wrote:

>On Tue, 16 Dec 2003, Rodrigo Severo wrote:
> =20
>
>>Said all this I ask, do you still would like to continue the diagnosis=20
>>process? I can send all the info you need, and I would like to help, bu=
t=20
>>as the main problem is solved and it doesn't looks like a driver relate=
d=20
>>matter, I'm not sure you want to keep spending time on this matter.
>>   =20
>>
>
>Running 'mii-diag eth0 --watch' might help diagnose the problem.
>Unplug and re-plug the network cable and see what link type is negotiate=
d.
> =20
>
Just did it.

The result - 100mbps full-duplex operation - is successfully negociated=20
with both switchs.

I can't find any different in the output from one switch to the other. I=20
won't post the results as I couldn't manage to capture the output, i.e.,=20
"mii-diag > log" and all variations I tried resulted in empty log files.

I just found some info from D-Link stating that the DFE 570TX board=20
won't work connected to a trunking-enabled port. I bet my Surecom=20
EP-816VX switch has port trunking (and I can't find how to disable it)=20
and my IMIX IM 3116+ haven't.

Any ideas?


Rodrigo Severo

--=20
----------------------------------------------------
Rodrigo Severo
F=E1brica de Id=E9ias
Fone: +55(61)321 1357
Fax: +55(61)223 1712
SBS - Quadra 2 - Ed. Empire Center - Sala 1301
Bras=EDlia/DF - Brasil
CEP: 70.070-904
----------------------------------------------------

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip