Re: Support for Radeon 9100 IGP-integrated 3c920?

disregard that last e-mail, found a pre-compiled one:
And the results are:

vortex-diag.c:v2.05 5/15/2001 Donald Becker ([email protected])
 http://www.scyld.com/diag/index.html
Assuming a 3Com Generic Vortex/Boomerag/Cyclone adapter at 0xd480.
 Indication enable is 0000, interrupt enable is 0000.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  MII.
Transceiver type in use:  MII.
 MAC settings: half-duplex.
 Station address set to 00:0e:a6:11:f3:92.
 Configuration options 0052.
Saved EEPROM settings of a 3Com Vortex/Boomerang:
 3Com Node Address 00:0E:A6:11:F3:92 (used as a unique ID only).
 OEM Station address 00:0E:A6:11:F3:92 (used as the ethernet address).
 Manufacture date (MM/DD/YYYY) 0/4/2002, division 2, product
 Options: negotiated duplex, link beat required.
  Vortex format checksum is incorrect (0055 vs. 1043).
  Cyclone format checksum is incorrect (0xcf vs. 0xe4).
  Hurricane format checksum is correct (0xe4 vs. 0xe4).
 MII PHY found at address 1, status 786d.
 MII PHY 0 at #1 transceiver registers:
   3100 786d 0000 8201 01e1 45e1 0001 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   000c 0080 0000 0023 0c59 0406 0200 8560
   8a7b 01f9 0000 0000 0000 0000 0000 0000.


_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex