heartbeat problem???

Jiang <[email protected]>
Newsgroups gmane.linux.highavailability.ultramonkey
Message-ID <[email protected]>
Hi,

I am not sure if this is the right place to post this message...
anyway... I hv posted it at HA and LVS' mailing list, but seems no
body could answer me...

In short, I hv two linux machines used to do LVS with HA (all
necessary packages were downloaded from ultramonkey). I have enslaved
eth0 and eth2 for data connections, eth1 and eth3 are for heartbeat,
they are connecting to the other machine
through cross cables. I attached ifconfig result at the end of this email.

in ha.cf, I have:
***********************************************************************************************
ucast eth1 172.16.1.1
ucast eth3 172.16.2.1
***********************************************************************************************
In my test, when disconnected both heartbeat cables, the two nodes
became two masters, but the problem happened when I connected
heartbeat cables back, none of the masters were willing to shudown,
which resulted two master running. And I also noticed that data began
to flush the ports(eth0/eth2), which slowed down the network speed
dramaticaly.

If anybody experienced the same problem or if I have missed something?
I have encounted the problem at least twice in my tests, and I have to
restart my server each time.

Thanks!

ifconfig -a:
***********************************************************************************************
bond0     Link encap:Ethernet  HWaddr 00:17:A4:3B:79:6C
         inet addr:10.226.200.211  Bcast:10.226.200.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
         RX packets:10919145 errors:5348955 dropped:0 overruns:0 frame:2
         TX packets:5445539 errors:2071 dropped:0 overruns:0 carrier:2071
         collisions:252799 txqueuelen:0
         RX bytes:720982816 (687.5 Mb)  TX bytes:359657582 (342.9 Mb)

eth0      Link encap:Ethernet  HWaddr 00:17:A4:3B:79:6C
         inet addr:10.226.200.211  Bcast:10.226.200.255  Mask:255.255.255.0
         UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
         RX packets:5459572 errors:5348954 dropped:0 overruns:0 frame:1
         TX packets:2577877 errors:0 dropped:0 overruns:0 carrier:0
         collisions:123370 txqueuelen:1000
         RX bytes:360491466 (343.7 Mb)  TX bytes:170263908 (162.3 Mb)
         Interrupt:28

eth1      Link encap:Ethernet  HWaddr 00:17:A4:3B:79:6B
         inet addr:172.16.1.1  Bcast:172.16.1.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:1030 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1286 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:194654 (190.0 Kb)  TX bytes:215134 (210.0 Kb)
         Interrupt:29

eth2      Link encap:Ethernet  HWaddr 00:17:A4:3B:79:6C
         inet addr:10.226.200.211  Bcast:10.226.200.255  Mask:255.255.255.0
         UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
         RX packets:5459573 errors:1 dropped:0 overruns:0 frame:1
         TX packets:2867662 errors:2071 dropped:0 overruns:0 carrier:2071
         collisions:129429 txqueuelen:1000
         RX bytes:360491350 (343.7 Mb)  TX bytes:189393674 (180.6 Mb)
         Base address:0x6000 Memory:f7fe0000-f8000000

eth3      Link encap:Ethernet  HWaddr 00:11:0A:5E:2C:A9
         inet addr:172.16.2.1  Bcast:172.16.2.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:1367 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1419 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:253011 (247.0 Kb)  TX bytes:254905 (248.9 Kb)
         Base address:0x6040 Memory:f7f60000-f7f80000
***********************************************************************************************

Best regards,
- Jiang -


-- 
Ultra Monkey - http://www.ultramonkey.org/
To UNSUBSCRIBE, email to [email protected], with a body:
unsubscribe ultramonkey-users [email protected]
where "[email protected]" is YOUR email address.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.