RE: RH S/390 7.2 install

>
>As I recommend to just about everyone, try running dasdfmt and mke2fs
>manually.  To do this, you'll have to start up rhsetup and get to the point
>where the DASD devices get defined.  (The Red Hat installation process
>dynamically creates the entries in /dev after you tell it what volumes
>you're using.)  When you get to that point, telnet in with a second session,
>and do the "dasdfmt -b 4096 -f /dev/dasda" etc.
You can ofcourse make your own ones, like
  mknod /dev/dasda b 94 0
  mknod /dev/dasda1 b 94 1
and then run dasdfmt and 'fdasd -a' against them. I found that in some
situations the RedHat installer does not recognize the disks after it
has formatted them, and it helped to simply reboot after formatting. 


_______________________________________________
Redhat-s390-list mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/redhat-s390-list