RE: FTP-installation on XL 266 - from where?

Never mind... I loaded the "NCR 53c7, 8xx" instead of the similar one
with "(old driver)". At least it now reports a 122MB swap and a 877MB
root on /dev/sdb

Still waiting forever for "Evaluating Package Selection" however...

-Stefan



> -----Ursprungligt meddelande-----
> Fr=E5n: Stefan Frick [mailto:[email protected]]=20
> Skickat: den 25 november 2003 23:55
> Till: [email protected]
> =C4mne: RE: [suse-axp] FTP-installation on XL 266 - from where?
>=20
>=20
> Hmm...  If I choose "Show loaded modules" it reports the "NCR=20
> 53c7, 8xx (old driver)" as being loaded. All the=20
> kernel-messages indicates that the SCSI-controller actually=20
> is the NCR-chip. Still, YaST says: "No hard disks found!=20
> Check your hardware", and then it hungs in "Evaluating=20
> Package Selection" for some 5-10 minutes before it dumps me=20
> back to the main menu of "Linuxrc v. 1.4"
> =20
> Should I unload the NCR-module, and what am I supposed to=20
> load instead?
> =20
> -Stefan (puzzled...)
>=20
> -----Ursprungligt meddelande-----
> Fr=E5n: Erwin de Beer [mailto:[email protected]]=20
> Skickat: den 25 november 2003 19:53
> Till: [email protected]
> =C4mne: RE: [suse-axp] FTP-installation on XL 266 - from where?
>=20
>=20
>=20
> Stephan,=20
>=20
> You have to load the appropriate driver for the controller on=20
> which your hd's reside. This should be done in the first=20
> setup screen (Main Menu) under Kernel modules (hardware drivers).
>=20
> Grtz,=20
> Erwin=20
>=20
>=20