External Iomega Ditto

ok

did an apt-get uprade yesterday on my debian system & now the tape
support has stopped working 

i'm using the same kernel & modules as before 

it worked fine until yesterday

the modules are insisting again on looking for irq -1

why cant i *tell* the module when i insmod it that i want it to use irq
7 ?

will this stuff ever make it to the kernel tree ?


very confused

James S


here's my output....

ftape v4.05 03/17/2002

(c) 1993-1996 Bas Laarhoven
(c) 1995-1996 Kai Harrekilde-Petersen
(c) 1996-2000 Claus-Justus Heine <[email protected])

QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX floppy tape drives.
Compiled for Linux version 2.4.19 (UP).
installing QIC-117 floppy tape driver ... 
ftape_init @ 0xc8838254.
[000]   ftape-init.c (ftape_build_driver_list) - Found driver bpck-fdc
for device 0.
zftape for ftape v4.05 03/17/2002
(c) 1996-2000 Claus-Justus Heine <[email protected]>
vfs interface for ftape floppy tape driver.
Support for QIC-113 compatible volume table.
Compiled for Linux version 2.4.19 with versioned symbols
[001]   zftape-init.c (zft_init) - zft_init @ 0xc8871ad8.
[002]   zftape-init.c (zft_init) - installing zftape VFS interface for
ftape driver ....
[003] 0   ftape-buffer.c (ftape_kmalloc_R1f9856c7) - allocated buffer @
c6b2ee00, 276 bytes.
[004] 0    ftape-buffer.c (ftape_kmalloc_R1f9856c7) - allocated buffer @
c6b2e800, 296 bytes.
[005] 0      ftape-buffer.c (ftape_kmalloc_R1f9856c7) - allocated buffer
@ c7f87c60, 244 bytes.
bpck-fdc.c: bpck_fdc_register @ 0xc887def4
[006]     fdc-io.c (fdc_driver_in_list) - Driver: bpck-fdc.
[007]    fdc-io.c (fdc_register_Ra2a900b7) - Probing for bpck-fdc tape
drive slot 0.
[008] 0       ftape-buffer.c (ftape_kmalloc_R1f9856c7) - allocated
buffer @ c250f7a0, 60 bytes.
[009] 0      bpck-fdc.c (bpck_fdc_detect) - called with ftape id 0.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
[010] 0       fdc-parport.h (ft_parport_probe) - dev: c4c3dda0.
[011] 0       fdc-parport.h (ft_parport_probe) - irq: -1.
[012] 0       fdc-parport.h (ft_parport_probe) - port: 378.
[013] 0       fdc-parport.h (ft_parport_probe) - can't find parport
interface for ftape id 0.
[014] 0       ftape-buffer.c (ftape_kfree_R02b0f34b) - released buffer @
c250f7a0, 60 bytes.
[015] 0      bpck-fdc.c (bpck_fdc_detect) - can't find bpck interface
for ftape id 0.
[016] 0      bpck-fdc.c (bpck_fdc_detect) - ft_parport_probe(fdc,
&bpck->parinfo) failed: -6.
[017] 0      fdc-io.c (fdc_destroy) - destroying fdc 0.
[018] 0       ftape-buffer.c (ftape_kfree_R02b0f34b) - released buffer @
c7f87c60, 244 bytes.
[019] 0    fdc-io.c (fdc_init) - fdc_search_driver(ftape->drive_sel)
failed: -6.
[020] 0   ftape-ctl.c (ftape_enable_R7ec0d5d4) - fdc_init(ftape) failed:
-6.
[021] 0  zftape-ctl.c (_zft_open) - ftape_enable_R7ec0d5d4(sel) failed:
-6.
[022] 0 zftape-init.c (zft_open) - _zft_open failed.



-
To unsubscribe from this list: send the line "unsubscribe linux-tape" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html