Re: chrootless on 18.04

Alkis Georgopoulos <[email protected]> Fri, 22 Feb 2019 09:08:50 +0200
Newsgroups gmane.linux.terminal-server.general
Message-ID <[email protected]>
At that point in busybox, try:

nbd-client 192.168.67.1 -N /opt/ltsp/i386 /dev/nbd0

Change 192.168.67.1 to your server IP,
and i386 to amd64, if your installation is 64bit.

If this command works, it's a problem with your DHCP configuration.
If it doesn't, it's a problem with your NBD configuration.

Alkis

Στις 21/2/19 11:16 μ.μ., ο Mark Pengelly έγραψε:
> In response to my need to create re-freshed logins on each boot for my 
> public ltsp lab ( see this discussion: 
> https://sourceforge.net/p/ltsp/mailman/message/36534036/)
> 
> I am attempting to setup a new (xubuntu) ltsp 18.04 server as a 
> chrootless machine: My subnet (192.168.12.x) has DHCP provided by a 
> pfSense router and the client can see the LTSP server to PXE boot from 
> no problem. The DHCP for the client os provided by the pfsense DHCP 
> server Ok, but  upon booting clients hangs at this point:
> Begin: mounting root file system ...
> Begin: Running /scripts/local-top ...
> Begin: Setting up ndb-client ... error socket failed: Connection timed out
> 
> At this point it gets stuck and goes to BusyBox
> 
> I tried to follow the instructions for setting up the server as per 
> here: http://wiki.ltsp.org/wiki/Installation/Ubuntu
> 
> Suggestions appreciated... :-)
> 
> 


_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net