Re: kernel errors and unknown SMART properties

Thank you Robert for this tip. Indeed there was a time when I had faulty 
hardware (see article), but I changed both the external enclosure and 
the cable since then.
As you may know, the counter is never reset. But I'll be sure to check 
the value in case I see it change.

Le 2014-11-13 16:35, [email protected] a écrit :
> I can't address your main question, but I did notice this:
> 
>> 199 UDMA_CRC_Error_Count    -O--CK   200   001   ---    -    819
> 
> UDMA_CRC_ErrorCount should be 0. That it is 819 indicates a problem. 
> Often
> it's the cable.
> 
>> Hi!
>> My issue is a bit complex. Please bear with me.
>> I wrote a lenghty article on the subject a year ago:
>> http://yalis.fr/cms/index.php/post/2013/12/14/“If-it-ain’t-broken,-don’t-fix-it�…-or-should-you

I see the URL is a bit damaged :D Here it is without "special" 
characters:
http://yalis.fr/cms/index.php/post/2013/12/14/%E2%80%9CIf-it-ain%E2%80%99t-broken,-don%E2%80%99t-fix-it%E2%80%9D%E2%80%A6-or-should-you

Yves.

------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support