| Newsgroups |
gmane.music.equipment.midi-guitar |
| Message-ID |
<[email protected]> |
--------------47D2623ECA9FADFBFFA0E9E7
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Tried it. Their claims are correct.
I just built a dedicated PC to run Jam Origin. I'm now running my
PG380's midi to one Roland synth and its straight pickup output through
the computer running Jam Origin to another Roland synth and Jam Origin
is almost perfect. So much so that my GK's and Axons and Roland
converters, and everything else will be up for sale soon. I've even run
the PG380 through my POG down one octave into Jam Origin's Bass Guitar
Midi and it's almost perfect too. The setup's kind of bulky but I built
the computer into a rack case and it just flits into my rack. I've
modified the computer's operating system to only run necessary processes
and it's not connected to the internet. The input is a Tascam 2X2 and
the midi out is via M-Audio MIDISPORT straight into a Roland JV-1010.
Being a computer engineer, I plan to build it all into one portable box
but for now, and just at home, it works just fine the way it is. I've
never had anything better.
BTW, the software is $100 and the license is for as many computers as
you want as long as they belong to you. You can even run the program
more than once on the same computer. So I could have a friend plugged
into channel two of everything and both channels would work.
This is only a semi-commercial product. Its money comes from the Danish
Ministry of Science which funds worthy projects. The lead programmer is
an artificial intelligence researcher and an expert is Digital Signal
Processing. This setup reminds me of the old Bell Labs.
The one caveat is, it doesn't work well with slinky strings. In fact
I'm up to using 13-54's but that doesn't seem to be any improvement over
11's and not much improvement over 10's but you can't get away with
8's. And you want to use the bridge pickup only. It works better, the
purest tone you can give it.
On 3/16/2018 12:04 PM, JAMES HARRISON [email protected] [midiguitar]
wrote:
>
>
> It's not exactly what you're looking for but you might have a look at
> the videos for MIDI GUITAR 2 by JAM ORIGIN [I think]. It's 100%
> software though. It claims to convert all six guitar strings to midi
> with VERY low latency using only the standard guitar cord from a
> standard guitar output. The specifically state that you DO NOT need any
> kind of hex pickup.
>
> The demo's are very impressive; but I haven't personally tried it.
>
> Anybody here tried it?
>
> Thanks,
> James L. Harrison
> ..
> ..
>
> > Thu Mar 15, 2018 2:44 am (PDT) . Posted by:
> >
> >
> > "Benoit Bouchez" benoitdmx
> > <mailto:[email protected]?subject=Re%3A%20Audio-2-Midi%3F>
> >
> > Hello Michael,
> >
> > what you are looking for does not exist.
> >
> > It's technically impossible to recognize chords and polyphony from a
> > single audio source and generate the corresponding MIDI stream.
> > If such a thing would exist, there would be no need for a multiple
> > dedicated microphone for MIDI guitars
> >
> > Benoit
> >
> > Le 15/03/2018 09:19, 'Michael Peters' [email protected] [midiguitar] a
> �crit :
> > >
> > > does anyone know if there is a fast, hardware based, polyphonic
> > > audio-2-midi converter? not for guitar, and I'm not interested in the
> > > new Roland guitar synths - I want a small dedicated box that does just
> > > that - input = audio, output = midi, with any kind of audio input.
> > >
> > > -Michael
>
>
--------------47D2623ECA9FADFBFFA0E9E7
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit
<head>
<style type="text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<!-- |**|begin egp html banner|**| -->
<br><br>
<!-- |**|end egp html banner|**| -->
Tried it. Their claims are correct. <br>
<br>
I just built a dedicated PC to run Jam Origin. I'm now running my
PG380's midi to one Roland synth and its straight pickup output
through the computer running Jam Origin to another Roland synth and
Jam Origin is almost perfect. So much so that my GK's and Axons and
Roland converters, and everything else will be up for sale soon.
I've even run the PG380 through my POG down one octave into Jam
Origin's Bass Guitar Midi and it's almost perfect too. The setup's
kind of bulky but I built the computer into a rack case and it just
flits into my rack. I've modified the computer's operating system
to only run necessary processes and it's not connected to the
internet. The input is a Tascam 2X2 and the midi out is via M-Audio
MIDISPORT straight into a Roland JV-1010. Being a computer
engineer, I plan to build it all into one portable box but for now,
and just at home, it works just fine the way it is. I've never had
anything better.<br>
<br>
BTW, the software is $100 and the license is for as many computers
as you want as long as they belong to you. You can even run the
program more than once on the same computer. So I could have a
friend plugged into channel two of everything and both channels
would work.<br>
<br>
This is only a semi-commercial product. Its money comes from the
Danish Ministry of Science which funds worthy projects. The lead
programmer is an artificial intelligence researcher and an expert is
Digital Signal Processing. This setup reminds me of the old Bell
Labs.<br>
<br>
The one caveat is, it doesn't work well with slinky strings. In
fact I'm up to using 13-54's but that doesn't seem to be any
improvement over 11's and not much improvement over 10's but you
can't get away with 8's. And you want to use the bridge pickup
only. It works better, the purest tone you can give it. <br>
<br>
<br>
<br>
<div class="moz-cite-prefix">On 3/16/2018 12:04 PM, JAMES HARRISON
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a> [midiguitar] wrote:<br>
</div>
<blockquote type="cite"
cite="mid:[email protected]"> <span
style="display:none"> </span>
<div id="ygrp-text">
<p><br>
It's not exactly what you're looking for but you might
have a look at <br>
the videos for MIDI GUITAR 2 by JAM ORIGIN [I think]. It's
100% <br>
software though. It claims to convert all six guitar
strings to midi <br>
with VERY low latency using only the standard guitar cord
from a <br>
standard guitar output. The specifically state that you DO
NOT need any <br>
kind of hex pickup.<br>
<br>
The demo's are very impressive; but I haven't personally
tried it.<br>
<br>
Anybody here tried it?<br>
<br>
Thanks,<br>
James L. Harrison<br>
..<br>
..<br>
<br>
> Thu Mar 15, 2018 2:44 am (PDT) . Posted by:<br>
><br>
><br>
> "Benoit Bouchez" benoitdmx<br>
>
<a class="moz-txt-link-rfc2396E" href="mailto:[email protected]?subject=Re%3A%20Audio-2-Midi%3F"><mailto:[email protected]?subject=Re%3A%20Audio-2-Midi%3F></a><br>
><br>
> Hello Michael,<br>
><br>
> what you are looking for does not exist.<br>
><br>
> It's technically impossible to recognize chords and
polyphony from a<br>
> single audio source and generate the corresponding
MIDI stream.<br>
> If such a thing would exist, there would be no need
for a multiple<br>
> dedicated microphone for MIDI guitars<br>
><br>
> Benoit<br>
><br>
> Le 15/03/2018 09:19, 'Michael Peters' <a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
[midiguitar] a �crit :<br>
> ><br>
> > does anyone know if there is a fast, hardware
based, polyphonic<br>
> > audio-2-midi converter? not for guitar, and I'm
not interested in the<br>
> > new Roland guitar synths - I want a small
dedicated box that does just<br>
> > that - input = audio, output = midi, with any
kind of audio input.<br>
> ><br>
> > -Michael<br>
<br>
</p>
</div>
<!-- end group email -->
</blockquote>
<br>
<!-- |**|begin egp html banner|**| -->
<br>
<br>
<!-- |**|end egp html banner|**| -->
<div width="1" style="color: white; clear: both;"/>__._,_.___</div>
<div id="fromDMARC" style="clear:both; margin-top: 10px;">
<hr style="height:2px ; border-width:0; color:#E3E3E3; background-color:#E3E3E3;">
Posted by: John Abrams <[email protected]> <hr style="height:2px ; border-width:0; color:#E3E3E3; background-color:#E3E3E3;">
</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- |**|begin egp html banner|**| -->
<br><br>
<tt>
--to unsubscribe send a blank message to [email protected]</tt>
<br><br>
<!-- |**|end egp html banner|**| -->
<!-- |**|begin egp html banner|**| -->
<img src="http://geo.yahoo.com/serv?s=97476590/grpId=1007803/grpspId=1705032047/msgId=36197/stime=1521228113" width="1" height="1"> <br>
<!-- |**|end egp html banner|**| -->
<!-- |**|begin egp html banner|**| -->
<br>
<!-- |**|begin egp html banner|**| -->
<div id="ygrp-vital" style="background-color: #f2f2f2; font-family: Verdana; font-size: 10px; margin-bottom: 10px; padding: 10px;">
<span id="vithd" style="font-weight: bold; color: #333; text-transform: uppercase; "><a href="https://groups.yahoo.com/neo/groups/midiguitar/info;_ylc=X3oDMTJlMzJ0bnFiBF9TAzk3MzU5NzE0BGdycElkAzEwMDc4MDMEZ3Jwc3BJZAMxNzA1MDMyMDQ3BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTUyMTIyODExMw--" style="text-decoration: none;">Visit Your Group</a></span>
<ul style="list-style-type: none; margin: 0; padding: 0; display: inline;">
</ul>
</div>
<div id="ft" style="font-family: Arial; font-size: 11px; margin-top: 5px; padding: 0 2px 0 0; clear: both;">
<a href="https://groups.yahoo.com/neo;_ylc=X3oDMTJkN24zcjF1BF9TAzk3NDc2NTkwBGdycElkAzEwMDc4MDMEZ3Jwc3BJZAMxNzA1MDMyMDQ3BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxNTIxMjI4MTEz" style="float: left;"><img src="http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png" height="15" width="137" alt="Yahoo! Groups" style="border: 0;"/></a>
<div style="color: #747575; float: right;"> • <a href="https://info.yahoo.com/privacy/us/yahoo/groups/details.html" style="text-decoration: none;">Privacy</a> • <a href="mailto:[email protected]?subject=Unsubscribe" style="text-decoration: none;">Unsubscribe</a> • <a href="https://info.yahoo.com/legal/us/yahoo/utos/terms/" style="text-decoration: none;">Terms of Use</a> </div>
</div>
<!-- |**|end egp html banner|**| -->
</div> <!-- ygrp-msg -->
<br>
<!-- |**|end egp html banner|**| -->
<div style="color: white; clear: both;"/>__,_._,___</div>
</body>
</html>
--------------47D2623ECA9FADFBFFA0E9E7--