Re: Help in getting high resolution in using Debian Sarge

u can set ur  SubSection "Display" as default 24(if it supports) and
resolution as Modes         "1024x768"  "800x600" "640x480"
but need to know ur card and monitor first.ur monitor should be
detected correctly.below is for my 915 GAV card on Sarge 3.1r1:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xtt"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	" Intel Corp. 82915G Express Chipset Family Graphics
Controller (rev 04)"
	Driver		"i810"
EndSection

Section "Monitor"
	Identifier	"S/T 57/56E/V"
	HorizSync	30-55
	VertRefresh	50-120
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		" Intel Corp. 82915G Express Chipset Family Graphics
Controller (rev 04)"
	Monitor		"S/T 57/56E/V"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection


On 4/6/06, Shiv Shankar <[email protected]> wrote:
>
> Hi,
>   I'm using Debian sarge in my computer . I cant get the resolution 1024*768
> in my system . My graphics card was detected successfully during the
> installation ... Please help ...
>
> Shiv
> --
> ~
> http://www.cultdeadcow.com/
> Communication is transcendence,
> Liberty and creativity are the only wealth,
> From beyond the blue earth and starry heaven,
> The cow shall watch over us !!!
> This is our new genesis gospel ...
> Cult of the dead cow ....
> _______________________________________________
> FSUG-Kochi-Discuss mailing list
> FSUG-Kochi-Discuss-8H24Gfgyrqprzt3WPRo2bV6hYfS7NtTn@public.gmane.org
> http://puggy.symonds.net/cgi-bin/mailman/listinfo/fsug-kochi-discuss
>
>
>