Re: SCSI on a blade 100 W/IDE
[email protected] (Sandwich Maker)
| Newsgroups | gmane.os.solaris.at-home |
|---|---|
| Message-ID | <[email protected]> |
" From: Howard Huntley <[email protected]> " " I just purchased a Sun Blade 100 with a 80gig HD running Solaris " v10.00. I want to connect my Sun scsi 12 disk "Store edge disk array" " onto the sun Blade 100. The blade 100 arrived with a scsi card " installed. I connected the drive pack to the scsi card and the system " appears to accept the drive pack. When I go in to SMC to configure the " array I can never find the scsi drive configurations on the blade " system. I also attempted to put 2 tape drives on the end of the scsi " chain then all seems to fail. Can anyone tell me how to resolve this " delima?? dilemma -- i'm still tootling along on s8; dunno if s10 still needs a reconfig reboot after a hardware change. have you tried format(1m)? ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen [email protected] and think what none thought