Re: syncing carbies!

Beth wrote:

> if you have a stock pipe, stick with the stock air cleaner, stock main
> jet size (Mikuni round 137.5, iirc), stock pilot jet size (Mikuni 15),
> fuel screws out 2.5 turns (unless you're living in a high altitude
> area) and stock needles. if you experience midrange surging, then put
> a .5mm shim under each needle.
>

I'd suggest the shim under all circumstances. I never experienced surging with
the stock jetting, but the needle shim gave me more midrange power. It was quite
noticeable.

-js

--
Jim Stewart
http://www.strappe.com

-------------------------------------------------
For all your SV needs: http://www.svrider.com

To change your list settings or leave SV650-L, please visit http://www.hawkgt.com/sv650/lists.asp