Re: Center pin solder joint repair (for SMA jack)
"Ubbe" <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.icomr2 |
|---|---|
| Message-ID | <[email protected]> |
No problem as long as you don't try and remove the antenna connector. If you do, it is sure to come loose and create never ending problems if you don't have the proper Icom tools for it. Ubbe. -----Original Message----- From: "al_wilkes" <[email protected]> I noticed tonight that I had to push on the side of my R2's duck antenna to improve the signal strength. Knowing this was not normal, I took the R2 apart and re-soldered the center-pin's solder joint. Fortunately for me this solved my problem.Has anyone else had to do this? ------------------------ Yahoo! Groups Sponsor ---------------------~--> Your own Online Store Selling our Overstock. http://us.click.yahoo.com/rZll0B/4ftFAA/46VHAA/ELTolB/TM ---------------------------------------------------------------------~-> Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/