Re: E-Scanner Plus Windows XP Serial Interface
"Harlan" <[email protected]> Thu, 05 Aug 2010 23:57:26 -0000
| Newsgroups | gmane.recreation.radio.hardware.uniden.bc245xlt |
|---|---|
| Message-ID | <[email protected]> |
Just working locally. Want to download freqs/groups onto computer, edit then upload back to scanner. --- In [email protected], Jeff Milges <arsonlt@...> wrote: > > IF you can communicate with the scanner thru the program, its most likely not the comm port. They don't start to fail, its usually a compatibility issue either soft or hardware. >  > Are you trying to download freqs from the internet right into the e-scanner program? > > > Jeff Milges, VP > MotorSports Rescue Association > SFI Drag Incident Response Instructor > > > > > > > > > 10500 Ulmerton Road > Suite 726-130 > Largo FL 33771 >  > (727) 515-9958 (Cell Phone) >  > www.MotorsportsRescue.org/rescue for Training or Event Coverage > > --- On Thu, 8/5/10, Keith <kilowattradio@...> wrote: > > > From: Keith <kilowattradio@...> > Subject: Re: [BC245XLT] E-Scanner Plus Windows XP Serial Interface > To: [email protected], harlan.lassiter@... > Date: Thursday, August 5, 2010, 6:52 PM > > >  > > > > Most likely the communication port is failing. What type of communication > port are you using? Real serial port or USB virtual serial port? What > model if USB? > > [posted to <BC245XLT.yahoogroups.com> & emailed] > On Thu, 05 Aug 2010 15:27:54 -0000, "Harlan" > <harlan.lassiter@...> wrote: > > > Got BC245XLT out of retirement and want to update frequencies and trunk groups. I bought E-Scanner Plus 2.1 long ago and found the registration key. Re-installed on new laptop. > > > > After putting 245 into Remote mode I can control the unit with the software control panel and all looks well, it is communicating fine with the laptop. > > > > However, when I try to download frequencies/talkgroups to E-Scanner the program hang immediately with a message something "correct radio connection". I have to close the window which is Not Responding. > > > > I have tried slowing the baud rate down, adding timeout delays, checking and unchecking the Windows 2000/ME/XP box and it always fails. > > > > Any suggestions greatly appreciated! > > > > (great group by the way) > > > > -- > > Best Regards, Keith > > http://home.comcast.net/~kilowattradio/ > > > > > > > > > > > > [Non-text portions of this message have been removed] > ------------------------------------ Enjoy the list ! No flames please! Please Keep it on topic! Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BC245XLT/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BC245XLT/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/