Re: ID Search of EDACS system.

Clark,
Yes, I have the scanner programmed in the correct LCN order, when I program talkgroups and do an ID SCAN it works perfect.  Signal strength is excellent on the control channel as well. 

Oh, I just discovered the problem! I didn't realize, I had iCall set to iCall Only!

Thanks
George


--- In [email protected], Clark Rennie <c.rennie1@...> wrote:
>
> Are the LCNs in the correct order and is the control channel receiving 
> a  signal ?
> Hold on the control channel and do you hear the control channel noise ?
> 
> Clark
> 
> At 10:51 AM 5/4/2013, you wrote:
> 
> >I just programmed an EDACS system into my BC785. However when I try an ID 
> >SEARCH it never stops on any talk-group.  I know there are talk-groups 
> >active because I have a BC780XLT also in ID SEARCH and its finding & 
> >stopping on every talk-group that's active.
> >
> >What am I doing wrong on the BC785 while trying ID SEARCH on an EDACS system.
> >
> >Thanks
> >George
> >http://www.MilAirComms.com
>




------------------------------------

If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..