[PATCH u-boot v3 2/2] ARM: dts: aspeed: Add dts for ASUS Kommando IPMI card

Add dts for Asus Kommando IPMI card, an ast2600 based pcie bmc card.
This DT has networking working in rgmii-id mode.

Signed-off-by: Anirudh Srinivasan <[email protected]>
---
 arch/arm/dts/Makefile                            |  1 +
 arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts | 92 ++++++++++++++++++++++++
 2 files changed, 93 insertions(+)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5141c3dc3aa025e2f5c9b2bb98216ee5c72cdf70..fa6837be747da4fbe102ac27e60ee3d81e230cb7 100755
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -682,6 +682,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2500-genesis3.dtb \
 	ast2500-romulus.dtb \
 	ast2600-ampere.dtb \
+	ast2600-asus-kommando-ipmi-card.dtb \
 	ast2600-bletchley.dtb \
 	ast2600-dcscm.dtb \
 	ast2600-evb-ecc.dtb \
diff --git a/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts b/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts
new file mode 100644
index 0000000000000000000000000000000000000000..bad3b011bae63c058fecd4790e3243bb0df4b770
--- /dev/null
+++ b/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "ast2600-u-boot.dtsi"
+
+/ {
+	model = "ASUS Kommando IPMI Card";
+	compatible = "asus,kommando-ipmi-card", "aspeed,ast2600";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	aliases {
+		spi0 = &fmc;
+		eth0 = &mac2;
+	};
+
+	cpus {
+		cpu@0 {
+			clock-frequency = <800000000>;
+		};
+		cpu@1 {
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fmcquad_default>;
+
+	flash@0 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&hace {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio3_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethphy2: ethernet-phy@2 {
+		reg = <0>;
+	};
+};
+
+&sdrammc {
+	clock-frequency = <400000000>;
+};
+
+&uart5 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&wdt3 {
+	status = "okay";
+};

-- 
2.52.0