gmane.os.freebsd.devel.arm archive

7702 archived articles, newest first (page 49 of 78). Latest articles →

Re: sys/arm/broadcom/bcm2835/bcm2838_xhci.c:184:21: error: variable 'sc' set but not used [-Werror,-Wunused-but-set-variable]
Thu, 28 Apr 2022 20:39:55 -0700
Mark Millard <[email protected]> • #25124
sys/arm/broadcom/bcm2835/bcm2838_xhci.c:184:21: error: variable 'sc' set but not used [-Werror,-Wunused-but-set-variable]
Thu, 28 Apr 2022 20:33:54 -0700
Mark Millard <[email protected]> • #25123
Re: uart1
Thu, 28 Apr 2022 17:16:56 +0200
Milan Obuch <[email protected]> • #25122
uart1
Thu, 28 Apr 2022 18:11:42 +0300
Nick Kostirya <[email protected]> • #25121
FYI: RPi* firmware tagged 1.20210727 appears to be the last to be bootable by FreeBSD via fdt use for both RPI3B and RPI4B
Thu, 28 Apr 2022 00:14:15 -0700
Mark Millard <[email protected]> • #25120
Re: FYI: RPi* firmware tagged 1.20210805 appears to be the last to be bootable by FreeBSD via fdt use; sequence of 2 failure modes after that
Wed, 27 Apr 2022 23:47:37 -0700
Mark Millard <[email protected]> • #25119
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Wed, 27 Apr 2022 22:42:57 -0700
Mark Millard <[email protected]> • #25118
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Wed, 27 Apr 2022 22:04:27 -0700
Mark Millard <[email protected]> • #25117
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Wed, 27 Apr 2022 19:32:26 -0700
bob prohaska <[email protected]> • #25116
[Bug 263607] [panic] [arm64] [13.1-RC4] very early panic after Release APs
Wed, 27 Apr 2022 12:50:04 +0000
[email protected] • #25115
Re: _Unwind_complete
Mon, 25 Apr 2022 05:00:42 -0700
Mark Millard <[email protected]> • #25114
_Unwind_complete
Mon, 25 Apr 2022 11:47:39 +0200
Robert Clausecker <[email protected]> • #25113
Re: Raspberry Pi 3B USB Printing Issue
Mon, 25 Apr 2022 12:31:18 +0800
Archimedes Gaviola <[email protected]> • #25112
[Bug 222062] unknown file system -> mountroot when booting aarm64 from ZFS
Mon, 25 Apr 2022 03:07:19 +0000
[email protected] • #25111
Problem reports for [email protected] that need special attention
Sun, 24 Apr 2022 21:00:57 +0000
[email protected] • #25110
Re: FYI: RPi* firmware tagged 1.20210805 appears to be the last to be bootable by FreeBSD via fdt use; sequence of 2 failure modes after that
Sun, 24 Apr 2022 05:36:56 -0700
Mark Millard <[email protected]> • #25109
Re: FYI: RPi* firmware tagged 1.20210805 appears to be the last to be bootable by FreeBSD via fdt use; sequence of 2 failure modes after that
Sun, 24 Apr 2022 04:37:09 -0700
Mark Millard <[email protected]> • #25108
Re: USB-OTG on BananaPi M1
Sun, 24 Apr 2022 12:01:26 +0200
Hans Petter Selasky <[email protected]> • #25107
Re: USB-OTG on BananaPi M1
Sun, 24 Apr 2022 11:58:00 +0200
Hans Petter Selasky <[email protected]> • #25106
Re: USB-OTG on BananaPi M1
Sun, 24 Apr 2022 11:50:44 +0200
Hans Petter Selasky <[email protected]> • #25105
FYI: RPi* firmware tagged 1.20210805 appears to be the last to be bootable by FreeBSD via fdt use; sequence of 2 failure modes after that
Sat, 23 Apr 2022 23:45:35 -0700
Mark Millard <[email protected]> • #25104
USB-OTG on BananaPi M1
Sun, 24 Apr 2022 11:31:34 +1000
Peter Jeremy <[email protected]> • #25103
Looks like U-Boot 2022.04 may be fairly useful
Sat, 23 Apr 2022 02:42:27 -0700
Mark Millard <[email protected]> • #25102
Re: Raspberry Pi 3B USB Printing Issue
Sat, 23 Apr 2022 13:01:30 +0800
Archimedes Gaviola <[email protected]> • #25101
devel/aarch64-none-elf-gcc and devel/arm-none-eabi-gcc include-fixed/... handling ?
Fri, 22 Apr 2022 14:39:23 -0700
Mark Millard <[email protected]> • #25100
Re: It looks like devel/aarch64-none-elf-gcc and other aarch64 */gcc* 's suffer from https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101723
Thu, 21 Apr 2022 18:31:43 -0700
Mark Millard <[email protected]> • #25099
[Bug 215691] head -r310854: lldb.full gets various "relocation truncated to fit: R_ARM_CALL against symbol ... defined in .plt section in ..." failure messages
Wed, 20 Apr 2022 14:28:55 +0000
[email protected] • #25098
What was sufficient to get sysutils/u-boot-tools to build a 2022.04 vintage
Mon, 18 Apr 2022 19:32:06 -0700
Mark Millard <[email protected]> • #25097
Re: It looks like devel/aarch64-none-elf-gcc and other aarch64 */gcc* 's suffer from https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101723
Mon, 18 Apr 2022 14:10:08 -0700
Mark Millard <[email protected]> • #25096
[Bug 262417] armv7 build fails for ARMADAXP
Mon, 18 Apr 2022 19:37:20 +0000
[email protected] • #25095
It looks like devel/aarch64-none-elf-gcc and other aarch64 */gcc* 's suffer from https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101723
Mon, 18 Apr 2022 12:36:01 -0700
Mark Millard <[email protected]> • #25094
Re: A FreeBSD port to build a RPI_EFI.fd matching https://github.com/pftf/RPi4 versioning?
Sun, 17 Apr 2022 15:14:55 -0700
Mark Millard <[email protected]> • #25093
Problem reports for [email protected] that need special attention
Sun, 17 Apr 2022 21:00:01 +0000
[email protected] • #25092
Re: A FreeBSD port to build a RPI_EFI.fd matching https://github.com/pftf/RPi4 versioning?
Sun, 17 Apr 2022 10:28:42 -0700
Mark Millard <[email protected]> • #25091
A FreeBSD port to build a RPI_EFI.fd matching https://github.com/pftf/RPi4 versioning?
Sun, 17 Apr 2022 04:41:07 -0700
Mark Millard <[email protected]> • #25090
Re: [armv7] 13.1-BETA2 boots on beaglebone, 14-CURRENT snapshot panics
Sat, 16 Apr 2022 17:14:09 -0400
Matteo Riondato <[email protected]> • #25089
[Bug 263348] Kernel cannot detect second ethernet interface
Sat, 16 Apr 2022 17:37:57 +0000
[email protected] • #25088
Re: [armv7] 13.1-BETA2 boots on beaglebone, 14-CURRENT snapshot panics
Wed, 13 Apr 2022 08:58:23 -0400
Matteo Riondato <[email protected]> • #25087
Re: .clear_stall
Wed, 13 Apr 2022 11:17:40 +0200
Hans Petter Selasky <[email protected]> • #25086
.clear_stall
Wed, 13 Apr 2022 12:28:46 +0530
"Kamal R. Prasad" <[email protected]> • #25085
Re: [armv7] 13.1-BETA2 boots on beaglebone, 14-CURRENT snapshot panics
Wed, 13 Apr 2022 00:09:59 +0200
Oskar Holmlund <[email protected]> • #25084
[armv7] 13.1-BETA2 boots on beaglebone, 14-CURRENT snapshot panics
Tue, 12 Apr 2022 09:48:14 -0400
Matteo Riondato <[email protected]> • #25083
Re: Raspberry Pi 3B Over-current USB
Tue, 12 Apr 2022 17:16:02 +0800
Archimedes Gaviola <[email protected]> • #25082
Re: Raspberry Pi 3B Over-current USB
Mon, 11 Apr 2022 15:59:10 +0200
Hans Petter Selasky <[email protected]> • #25081
Re: Raspberry Pi 3B Over-current USB
Mon, 11 Apr 2022 21:59:08 +0800
Archimedes Gaviola <[email protected]> • #25080
Re: Raspberry Pi 3B Over-current USB
Mon, 11 Apr 2022 11:10:02 +0200
Hans Petter Selasky <[email protected]> • #25079
Problem reports for [email protected] that need special attention
Sun, 10 Apr 2022 21:01:01 +0000
[email protected] • #25078
Re: [armv7] dtb specified with FDT_DTS_FILE in kernconf not built when using release.sh
Sun, 10 Apr 2022 16:22:44 -0400
Matteo Riondato <[email protected]> • #25077
Re: [armv7] dtb specified with FDT_DTS_FILE in kernconf not built when using release.sh
Sun, 10 Apr 2022 17:15:30 -0300
Mitchell Horne <[email protected]> • #25076
[armv7] dtb specified with FDT_DTS_FILE in kernconf not built when using release.sh
Sun, 10 Apr 2022 15:58:16 -0400
Matteo Riondato <[email protected]> • #25075
Re: Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sun, 10 Apr 2022 11:35:09 -0700
Mark Millard <[email protected]> • #25074
Re: Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sun, 10 Apr 2022 01:02:15 -0700
Mark Millard <[email protected]> • #25073
Re: Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 20:39:06 -0700
bob prohaska <[email protected]> • #25072
Re: Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 17:22:49 -0700
Mark Millard <[email protected]> • #25071
Re: Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 16:54:23 -0700
Mark Millard <[email protected]> • #25070
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 15:26:48 -0700
Mark Millard <[email protected]> • #25069
Updating RPi boot materials, was Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 15:17:42 -0700
bob prohaska <[email protected]> • #25068
Re: RPI4 panic on boot with -current
Sat, 09 Apr 2022 16:41:53 -0500
Mike Karels <[email protected]> • #25067
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 13:59:10 -0700
Mark Millard <[email protected]> • #25066
Re: Rpi3 panic, data abort with spinlock held on -current
Sat, 9 Apr 2022 13:37:24 -0700
Mark Millard <[email protected]> • #25065
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 21:29:00 +0100
Andrew Turner <[email protected]> • #25064
Raspberry Pi 3B Over-current USB
Sun, 10 Apr 2022 02:04:24 +0800
Archimedes Gaviola <[email protected]> • #25063
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 09:56:28 -0700
bob prohaska <[email protected]> • #25062
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 08:44:33 -0700
bob prohaska <[email protected]> • #25061
Re: Rpi3 panic, data abort with spinlock held on -current
Sat, 9 Apr 2022 08:02:42 -0700
bob prohaska <[email protected]> • #25060
Re: RPI4 panic on boot with -current
Sat, 09 Apr 2022 09:00:36 -0500
Mike Karels <[email protected]> • #25059
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 12:46:36 +0100
Andrew Turner <[email protected]> • #25058
Re: RPI4 panic on boot with -current
Sat, 9 Apr 2022 13:00:47 +0200
Ronald Klop <[email protected]> • #25057
Re: Rpi3 panic, data abort with spinlock held on -current
Sat, 9 Apr 2022 01:22:47 -0700
Mark Millard <[email protected]> • #25056
Re: Rpi3 panic, data abort with spinlock held on -current
Sat, 9 Apr 2022 09:47:34 +0200
Hans Petter Selasky <[email protected]> • #25055
[Bug 263170] RPi3B+ U-Boot Saveenv fails
Sat, 09 Apr 2022 05:57:30 +0000
[email protected] • #25054
Re: RPI4 panic on boot with -current
Fri, 8 Apr 2022 19:46:57 -0700
Mark Millard <[email protected]> • #25053
RPI4 panic on boot with -current
Fri, 8 Apr 2022 18:53:21 -0700
bob prohaska <[email protected]> • #25052
Re: Rpi3 panic, data abort with spinlock held on -current
Fri, 8 Apr 2022 17:15:48 -0700
Mark Millard <[email protected]> • #25051
Rpi3 panic, data abort with spinlock held on -current
Fri, 8 Apr 2022 16:08:53 -0700
bob prohaska <[email protected]> • #25050
Rock64 eMMC not working
Wed, 6 Apr 2022 21:08:10 -0700
John-Mark Gurney <[email protected]> • #25049
Re: https://github.com/pftf/RPi3 UEFI/ACPI based booting: gic_acpi_identify crashes dereferencing a NULL pointer value
Wed, 6 Apr 2022 16:37:45 -0700
Mark Millard <[email protected]> • #25048
Installing Freebsd on RPI 4
Wed, 6 Apr 2022 16:10:55 +0200
Luciano Mannucci <[email protected]> • #25047
https://github.com/pftf/RPi3 UEFI/ACPI based booting: gic_acpi_identify crashes dereferencing a NULL pointer value
Wed, 6 Apr 2022 01:01:31 -0700
Mark Millard <[email protected]> • #25046
[Bug 263063] [if_ure] ure0: attaching PHYs failed
Tue, 05 Apr 2022 17:31:53 +0000
[email protected] • #25045
[Bug 263063] [if_ure] ure0: attaching PHYs failed
Tue, 05 Apr 2022 14:56:10 +0000
[email protected] • #25044
Re: RPi4B's got a PMIC replacement, so now there are Rev 1.5 variants with matching firmware requirements; more
Mon, 4 Apr 2022 04:53:14 -0700
Mark Millard <[email protected]> • #25043
RPi4B's got a PMIC replacement, so now there are Rev 1.5 variants with matching firmware requirements; more
Sun, 3 Apr 2022 23:44:29 -0700
Mark Millard <[email protected]> • #25042
Problem reports for [email protected] that need special attention
Sun, 3 Apr 2022 21:00:41 +0000
[email protected] • #25041
[Bug 216062] linker command failed in function `numa_setaffinity'
Sun, 03 Apr 2022 15:03:36 +0000
[email protected] • #25040
Extra uarts to Rpi4b 8Gb do not work
Sun, 03 Apr 2022 16:39:18 +0400
Alexander Mishin <[email protected]> • #25039
Re: Raspberry Pi 3B USB Printing Issue
Sat, 2 Apr 2022 09:10:25 +0800
Archimedes Gaviola <[email protected]> • #25038
Re: Raspberry Pi 3B USB Printing Issue
Sat, 2 Apr 2022 02:30:25 +0200
Hans Petter Selasky <[email protected]> • #25037
Re: Raspberry Pi 3B USB Printing Issue
Sat, 2 Apr 2022 06:56:39 +0800
Archimedes Gaviola <[email protected]> • #25036
Re: Booting rock64 from USB SSD
Sat, 2 Apr 2022 00:39:29 +0200
Łukasz Moskała <[email protected]> • #25035
Re: Booting rock64 from USB SSD
Fri, 1 Apr 2022 13:52:34 -0700
Mark Millard <[email protected]> • #25034
Booting rock64 from USB SSD
Fri, 1 Apr 2022 15:51:12 +0200
Łukasz Moskała <[email protected]> • #25033
Re: Raspberry Pi 3B USB Printing Issue
Thu, 31 Mar 2022 18:01:13 +0200
Hans Petter Selasky <[email protected]> • #25032
Re: Raspberry Pi 3B USB Printing Issue
Thu, 31 Mar 2022 21:52:59 +0800
Archimedes Gaviola <[email protected]> • #25031
Re: Raspberry Pi 3B USB Printing Issue
Thu, 31 Mar 2022 15:22:15 +0200
Hans Petter Selasky <[email protected]> • #25030
Re: Raspberry Pi 3B USB Printing Issue
Thu, 31 Mar 2022 20:03:23 +0800
Archimedes Gaviola <[email protected]> • #25029
Re: Raspberry Pi 3B USB Printing Issue
Thu, 31 Mar 2022 19:52:58 +0800
Archimedes Gaviola <[email protected]> • #25028
[Bug 262910] immintrin.h fails on arm64: error: use of undeclared identifier '__builtin_ia32_emms'; did you mean '__builtin_isless'?
Tue, 29 Mar 2022 21:02:43 +0000
[email protected] • #25027
[Bug 262910] immintrin.h fails on arm64: error: use of undeclared identifier '__builtin_ia32_emms'; did you mean '__builtin_isless'?
Tue, 29 Mar 2022 19:17:55 +0000
[email protected] • #25026
Problem reports for [email protected] that need special attention
Sun, 27 Mar 2022 21:00:15 +0000
[email protected] • #25025
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.