gmane.os.freebsd.devel.arm archive

7702 archived articles, newest first (page 50 of 78). Latest articles →

Re: Raspberry Pi 3B USB Printing Issue
Sun, 27 Mar 2022 22:28:07 +0800
Archimedes Gaviola <[email protected]> • #25024
Re: Raspberry Pi 3B USB Printing Issue
Sun, 27 Mar 2022 10:04:52 +0200
Hans Petter Selasky <[email protected]> • #25023
Re: Raspberry Pi 3B USB Printing Issue
Sun, 27 Mar 2022 13:55:18 +0800
Archimedes Gaviola <[email protected]> • #25022
[Bug 262836] [arm64] cacheline flush instruction (dc cvau) causes SIGSEGV from userland
Sat, 26 Mar 2022 16:12:27 +0000
[email protected] • #25021
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 11:24:46 -0700
bob prohaska <[email protected]> • #25020
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 11:11:54 -0700
Mark Millard <[email protected]> • #25019
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 10:43:27 -0700
Mark Millard <[email protected]> • #25018
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 17:51:18 +0100
Kristof Provost <[email protected]> • #25017
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 08:59:47 -0700
bob prohaska <[email protected]> • #25016
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 08:34:31 -0700
Mark Millard <[email protected]> • #25015
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Wed, 23 Mar 2022 11:51:17 +0100
Kristof Provost <[email protected]> • #25014
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Tue, 22 Mar 2022 20:23:09 -0700
Mark Millard <[email protected]> • #25013
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Tue, 22 Mar 2022 20:16:42 -0700
Mark Millard <[email protected]> • #25012
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Tue, 22 Mar 2022 20:12:21 -0700
Mark Millard <[email protected]> • #25011
Re: /usr/src/sys/net/if_epair.c:181:6: error: ...
Tue, 22 Mar 2022 20:06:46 -0700
Mark Millard <[email protected]> • #25010
/usr/src/sys/net/if_epair.c:181:6: error: ...
Tue, 22 Mar 2022 18:26:57 -0700
bob prohaska <[email protected]> • #25009
[Bug 262700] pmu0: Cannot find CPU with MPIDR: 0x00000002
Mon, 21 Mar 2022 14:27:16 +0000
[email protected] • #25008
Problem reports for [email protected] that need special attention
Sun, 20 Mar 2022 21:00:13 +0000
[email protected] • #25007
[Bug 262691] [patch] Save only callee-saved registers in pcb
Sun, 20 Mar 2022 20:58:03 +0000
[email protected] • #25006
Re: Raspberry Pi 3B USB Printing Issue
Sun, 20 Mar 2022 20:02:22 +0800
Archimedes Gaviola <[email protected]> • #25005
[armv7] 13.1-BETA1-GENERICSD panic at boot on beaglebone enhanced
Fri, 18 Mar 2022 21:42:48 -0400
Matteo Riondato <[email protected]> • #25004
Re: Raspberry Pi 3B USB Printing Issue
Thu, 17 Mar 2022 22:35:24 +0800
Archimedes Gaviola <[email protected]> • #25003
Re: Raspberry Pi 3B USB Printing Issue
Thu, 17 Mar 2022 15:32:00 +0100
Hans Petter Selasky <[email protected]> • #25002
Re: Raspberry Pi 3B USB Printing Issue
Thu, 17 Mar 2022 21:54:47 +0800
Archimedes Gaviola <[email protected]> • #25001
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Thu, 17 Mar 2022 07:17:21 +0200
Stefan Parvu <[email protected]> • #25000
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 13:49:51 -0500
Matthew Grooms <[email protected]> • #24999
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 20:04:53 +0200
Stefan Parvu <[email protected]> • #24998
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 12:25:46 -0500
Matthew Grooms <[email protected]> • #24997
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 19:02:29 +0200
Stefan Parvu <[email protected]> • #24996
Re: USB regression on Overdrive 1000
Wed, 16 Mar 2022 17:54:06 +0100
Hans Petter Selasky <[email protected]> • #24995
Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 11:49:00 -0500
Matthew Grooms <[email protected]> • #24994
RBPI4B+ 2GB using FreeBSD 13.1 RC1
Wed, 16 Mar 2022 18:32:13 +0200
Stefan Parvu <[email protected]> • #24993
Re: USB regression on Overdrive 1000
Wed, 16 Mar 2022 16:52:43 +0100
Emmanuel Vadot <[email protected]> • #24992
Re: USB regression on Overdrive 1000
Wed, 16 Mar 2022 16:50:59 +0100
Hans Petter Selasky <[email protected]> • #24991
Re: USB regression on Overdrive 1000
Wed, 16 Mar 2022 15:43:10 +0000
John F Carr <[email protected]> • #24990
Re: USB regression on Overdrive 1000
Wed, 16 Mar 2022 15:51:35 +0100
Hans Petter Selasky <[email protected]> • #24989
Re: Raspberry Pi 3B USB Printing Issue
Wed, 16 Mar 2022 22:17:58 +0800
Archimedes Gaviola <[email protected]> • #24988
USB regression on Overdrive 1000
Wed, 16 Mar 2022 13:46:06 +0000
John F Carr <[email protected]> • #24987
Re: Raspberry Pi 3B USB Printing Issue
Wed, 16 Mar 2022 14:31:45 +0100
Hans Petter Selasky <[email protected]> • #24986
Re: Raspberry Pi 3B USB Printing Issue
Wed, 16 Mar 2022 20:02:57 +0800
Archimedes Gaviola <[email protected]> • #24985
[Bug 262554] [armv7][GENERICSD][patch] release.sh fails due to wrong argument to gpart add
Wed, 16 Mar 2022 04:12:45 +0000
[email protected] • #24984
[Bug 262570] How to fix Mincraft LAN Not Working Issue?
Wed, 16 Mar 2022 02:10:14 +0000
[email protected] • #24983
aarch64 contexts: devel/libunwind builds broken --"error: no member named 'regs' in 'struct __mcontext'" (and more)
Tue, 15 Mar 2022 13:53:39 -0700
Mark Millard <[email protected]> • #24982
Re: Raspberry Pi 3B USB Printing Issue
Tue, 15 Mar 2022 22:34:14 +0800
Archimedes Gaviola <[email protected]> • #24981
[Bug 262570] How to fix Mincraft LAN Not Working Issue?
Tue, 15 Mar 2022 13:13:17 +0000
[email protected] • #24980
Re: Raspberry Pi 3B USB Printing Issue
Tue, 15 Mar 2022 16:54:30 +0800
Archimedes Gaviola <[email protected]> • #24979
Re: Raspberry Pi 3B USB Printing Issue
Tue, 15 Mar 2022 08:59:03 +0100
Hans Petter Selasky <[email protected]> • #24978
Re: Raspberry Pi 3B Slow Boot-up
Tue, 15 Mar 2022 13:00:37 +0800
Archimedes Gaviola <[email protected]> • #24977
Re: Raspberry Pi 3B USB Printing Issue
Tue, 15 Mar 2022 12:57:26 +0800
Archimedes Gaviola <[email protected]> • #24976
[Bug 262554] [armv7] [GENERICSD] release.sh fails
Mon, 14 Mar 2022 15:37:46 +0000
[email protected] • #24975
Re: Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 10:24:09 -0500
Kyle Evans <[email protected]> • #24974
Re: Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 08:10:01 -0700
Mark Millard <[email protected]> • #24973
Re: Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 22:12:49 +0800
Archimedes Gaviola <[email protected]> • #24972
Re: Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 21:50:05 +0800
Archimedes Gaviola <[email protected]> • #24971
Re: Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 05:01:16 -0700
Mark Millard <[email protected]> • #24970
Re: Raspberry Pi 3B USB Printing Issue
Mon, 14 Mar 2022 18:12:40 +0800
Archimedes Gaviola <[email protected]> • #24969
Raspberry Pi 3B Slow Boot-up
Mon, 14 Mar 2022 17:55:35 +0800
Archimedes Gaviola <[email protected]> • #24968
Re: Raspberry Pi 3B USB Printing Issue
Mon, 14 Mar 2022 10:31:20 +0100
Hans Petter Selasky <[email protected]> • #24967
Re: Raspberry Pi 3B USB Printing Issue
Mon, 14 Mar 2022 17:20:30 +0800
Archimedes Gaviola <[email protected]> • #24966
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Sun, 13 Mar 2022 15:00:24 -0700
Mark Millard <[email protected]> • #24965
Problem reports for [email protected] that need special attention
Sun, 13 Mar 2022 21:00:54 +0000
[email protected] • #24964
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Sun, 13 Mar 2022 13:46:17 -0700
Mark Millard <[email protected]> • #24963
Re: Erratic ping behavior, was Re: Pi3 answers ssh only if outbound ping is running on -current
Sun, 13 Mar 2022 12:34:06 -0700
bob prohaska <[email protected]> • #24962
Re: Raspberry Pi 3B USB Printing Issue
Sun, 13 Mar 2022 23:25:39 +0800
Archimedes Gaviola <[email protected]> • #24961
Re: Raspberry Pi 3B USB Printing Issue
Sun, 13 Mar 2022 14:27:09 +0800
Archimedes Gaviola <[email protected]> • #24960
Re: Raspberry Pi 3B USB Printing Issue
Sat, 12 Mar 2022 17:38:34 +0100
Hans Petter Selasky <[email protected]> • #24959
Re: Raspberry Pi 3B USB Printing Issue
Sat, 12 Mar 2022 23:31:26 +0800
Archimedes Gaviola <[email protected]> • #24958
Re: Raspberry Pi 3B USB Printing Issue
Sat, 12 Mar 2022 17:33:07 +0800
Archimedes Gaviola <[email protected]> • #24957
Re: Raspberry Pi 3B USB Printing Issue
Sat, 12 Mar 2022 09:41:19 +0100
Hans Petter Selasky <[email protected]> • #24956
Re: Raspberry Pi 3B Distorted U-boot Display
Sat, 12 Mar 2022 16:27:53 +0800
Archimedes Gaviola <[email protected]> • #24955
Re: Raspberry Pi 3B USB Printing Issue
Sat, 12 Mar 2022 15:07:22 +0800
Archimedes Gaviola <[email protected]> • #24954
Re: Raspberry Pi 3B USB Printing Issue
Fri, 11 Mar 2022 17:20:21 +0100
Hans Petter Selasky <[email protected]> • #24953
Re: Raspberry Pi 3B USB Printing Issue
Fri, 11 Mar 2022 23:36:43 +0800
Archimedes Gaviola <[email protected]> • #24952
Booting MOCHAbin-5g Marvell board from GlobalscaleTech
Fri, 11 Mar 2022 00:02:13 -0500
Tom Pusateri <[email protected]> • #24951
Re: Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 21:09:58 +0800
Archimedes Gaviola <[email protected]> • #24950
Re: Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 13:52:53 +0100
Hans Petter Selasky <[email protected]> • #24949
Re: Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 20:37:08 +0800
Archimedes Gaviola <[email protected]> • #24948
Re: Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 08:47:42 +0100
Hans Petter Selasky <[email protected]> • #24947
Re: Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 07:24:58 +0800
Archimedes Gaviola <[email protected]> • #24946
Re: Pi4 via Crochet?
Wed, 9 Mar 2022 16:49:47 -0500
Karl Denninger <[email protected]> • #24945
Re: Pi4 via Crochet?
Wed, 9 Mar 2022 13:21:22 -0800
Mark Millard <[email protected]> • #24944
Re: Raspberry Pi 3B USB Printing Issue
Wed, 9 Mar 2022 21:13:56 +0100
Hans Petter Selasky <[email protected]> • #24943
Pi4 via Crochet?
Wed, 9 Mar 2022 14:56:35 -0500
Karl Denninger <[email protected]> • #24942
Raspberry Pi 3B USB Printing Issue
Thu, 10 Mar 2022 01:55:44 +0800
Archimedes Gaviola <[email protected]> • #24941
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Tue, 8 Mar 2022 07:42:04 -0800
bob prohaska <[email protected]> • #24940
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Tue, 8 Mar 2022 12:26:05 +0000
Andrew Turner <[email protected]> • #24939
[Bug 262417] armv7 build fails for ARMADAXP
Tue, 08 Mar 2022 11:13:59 +0000
[email protected] • #24938
'Translation Fault (L1) on read' error
Tue, 8 Mar 2022 11:06:48 +0100 (CET)
Lee MATTHEWS <[email protected]> • #24937
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 16:42:54 -0500
Mark Johnston <[email protected]> • #24936
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 13:17:56 -0800
Mark Millard <[email protected]> • #24935
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 21:54:26 +0100 (CET)
Ronald Klop <[email protected]> • #24934
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 14:04:09 -0500
Mark Johnston <[email protected]> • #24933
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 10:03:51 -0800
Mark Millard <[email protected]> • #24932
Re: PCF8574 I2C configuration for 14.0-CURRENT on a RPi2B
Mon, 7 Mar 2022 09:25:38 -0800
Mark Millard <[email protected]> • #24931
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 11:45:02 -0500
Mark Johnston <[email protected]> • #24930
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 16:25:22 +0000
Andrew Turner <[email protected]> • #24929
Re: PCF8574 I2C configuration for 14.0-CURRENT on a RPi2B
07 Mar 2022 16:10:12 UTC
Don Kuenz <[email protected]> • #24928
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 10:13:37 -0500
Mark Johnston <[email protected]> • #24927
Re: PCF8574 I2C configuration for 14.0-CURRENT on a RPi2B
07 Mar 2022 14:48:15 UTC
Don Kuenz <[email protected]> • #24926
Re: panic: data abort in critical section or under mutex (was: Re: panic: Unknown kernel exception 0 esr_el1 2000000 (on 14-CURRENT/aarch64 Feb 28))
Mon, 7 Mar 2022 06:37:46 -0800
Mark Millard <[email protected]> • #24925
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.