gmane.os.freebsd.devel.mobile archive

17567 archived articles, newest first (page 32 of 176). Latest articles →

Re: Re: Re: Re: bge and wpi do not function on aspire 5920
Wed, 14 May 2008 08:59:15 +0300 (EEST)
Mario Pavlov <[email protected]> • #14538
alienware m15x network problem (duplicate sorry)
Wed, 14 May 2008 02:40:30 +0000
Alex mallais <[email protected]> • #14537
Re: Re: Re: bge and wpi do not function on aspire 5920
Wed, 14 May 2008 10:02:41 +0800
"Sepherosa Ziehau" <[email protected]> • #14536
Re: Re: Re: bge and wpi do not function on aspire 5920
Tue, 13 May 2008 22:07:47 +0300 (EEST)
Mario Pavlov <[email protected]> • #14535
Re: I would appreciate an opinion from someone with internal network wireless voice and data experience
Tue, 13 May 2008 05:53:12 -0500
eculp <[email protected]> • #14534
Re: Re: bge and wpi do not function on aspire 5920
Tue, 13 May 2008 08:11:05 +0300 (EEST)
Mario Pavlov <[email protected]> • #14533
Re: I would appreciate an opinion from someone with internal network wireless voice and data experience
Tue, 13 May 2008 00:01:16 +0200
Rainer Duffner <[email protected]> • #14532
Re: bge and wpi do not function on aspire 5920
Mon, 12 May 2008 23:28:04 +0200
Mel <[email protected]> • #14531
bge and wpi do not function on aspire 5920
Mon, 12 May 2008 23:33:06 +0300 (EEST)
Mario Pavlov <[email protected]> • #14530
I would appreciate an opinion from someone with internal network wireless voice and data experience
Mon, 12 May 2008 10:39:44 -0500
eculp <[email protected]> • #14529
Re: "International" channels on a CM9
Tue, 06 May 2008 01:06:50 +0930
Benjamin Close <[email protected]> • #14528
Re: nozomi driver (was: Vodafone Mobile Connect HSDPA/UMTS/EDGE datacard supported?)
Mon, 5 May 2008 11:40:29 +0200
Matthias Apitz <[email protected]> • #14527
Re: nozomi driver (was: Vodafone Mobile Connect HSDPA/UMTS/EDGE datacard supported?)
Mon, 5 May 2008 08:35:30 +0200
Matthias Apitz <[email protected]> • #14526
Re: nozomi driver (was: Vodafone Mobile Connect HSDPA/UMTS/EDGE datacard supported?)
Sun, 4 May 2008 16:37:05 +0200
Matthias Apitz <[email protected]> • #14525
Re: nozomi driver (was: Vodafone Mobile Connect HSDPA/UMTS/EDGE datacard supported?)
Sat, 03 May 2008 15:35:57 +0200
Volker <[email protected]> • #14524
Vodafone Mobile Connect HSDPA/UMTS/EDGE datacard supported?
Sat, 3 May 2008 08:41:35 +0200
Matthias Apitz <[email protected]> • #14523
Photos and Presentation Materials from HITBSecConf2008 - Dubai Released
Sat, 03 May 2008 09:48:55 +0800
Praburaajan <[email protected]> • #14522
measure traffic caused by pppd (UMTS)
Fri, 2 May 2008 11:46:46 +0200
Matthias Apitz <[email protected]> • #14521
Re: battery monitor with KDE 64 bit
Tue, 29 Apr 2008 21:22:45 +0200
martinko <[email protected]> • #14520
Re: Dial-up Networking with Verizon and Treo
Sun, 27 Apr 2008 13:16:23 -0400 (EDT)
"Tuc at T-B-O-H.NET" <[email protected]> • #14519
Re: Dial-up Networking with Verison and Treo
Sun, 27 Apr 2008 16:08:58 +0200
Zoran Kolic <[email protected]> • #14518
Re: Dial-up Networking with Verizon and Treo
Sat, 26 Apr 2008 20:35:29 -0700
"Kevin Oberman" <[email protected]> • #14517
Re: Dial-up Networking with Verizon and Treo
Fri, 25 Apr 2008 22:43:09 -0400 (EDT)
"Tuc at T-B-O-H.NET" <[email protected]> • #14516
Re: "International" channels on a CM9
Fri, 25 Apr 2008 17:52:09 -0400
Jordan Coleman <[email protected]> • #14515
Re: Dial-up Networking with Verizon and Treo
Fri, 25 Apr 2008 13:28:54 -0700
"Kevin Oberman" <[email protected]> • #14514
Re: Dial-up Networking with Verizon and Treo
Fri, 25 Apr 2008 14:58:14 -0400
"Yuri Lukin" <[email protected]> • #14513
Dial-up Networking with Verizon and Treo
Fri, 25 Apr 2008 10:35:33 -0700
"Kevin Oberman" <[email protected]> • #14512
Status on Asus Eee support?
Thu, 24 Apr 2008 00:32:04 -0700
Jack Twilley <[email protected]> • #14511
Re: "International" channels on a CM9
Wed, 23 Apr 2008 19:51:30 -0400
Jordan Coleman <[email protected]> • #14510
Re: "International" channels on a CM9
Thu, 24 Apr 2008 08:46:52 +0930
Benjamin Close <[email protected]> • #14509
"International" channels on a CM9
Wed, 23 Apr 2008 15:54:47 -0400
Jordan Coleman <[email protected]> • #14508
Re: battery monitor with KDE 64 bit
Wed, 23 Apr 2008 13:45:59 +1000 (EST)
Ian Smith <[email protected]> • #14507
Re: battery monitor with KDE 64 bit
Tue, 22 Apr 2008 21:56:46 +0200
mato <[email protected]> • #14506
Re: battery monitor with KDE 64 bit
Tue, 22 Apr 2008 21:52:27 +0200
mato <[email protected]> • #14505
Re: battery monitor with KDE 64 bit
Tue, 22 Apr 2008 11:49:43 +0200
Lars Engels <[email protected]> • #14504
Re: pciconf -w
Mon, 21 Apr 2008 12:07:40 +0900
Takashi Inoue <[email protected]> • #14502
Re: pciconf -w
Thu, 17 Apr 2008 10:07:14 -0600 (MDT)
"M. Warner Losh" <[email protected]> • #14501
Re: pciconf -w
Thu, 17 Apr 2008 17:56:56 +0200
Dirk-Willem van Gulik <[email protected]> • #14500
Re: pciconf -w
Thu, 17 Apr 2008 08:47:57 -0700
Sam Leffler <[email protected]> • #14499
Re: pciconf -w
Thu, 17 Apr 2008 09:47:32 -0600 (MDT)
"M. Warner Losh" <[email protected]> • #14498
Re: fprint (finger print sensor framework) port ready for testing
Thu, 17 Apr 2008 21:31:36 +0700
"Outback Dingo" <[email protected]> • #14497
Re: pciconf -w
Thu, 17 Apr 2008 09:14:23 -0400
Dan Langille <[email protected]> • #14496
Re: pciconf -w
Thu, 17 Apr 2008 11:39:41 +0200
Dirk-Willem van Gulik <[email protected]> • #14495
Re: pciconf -w
Thu, 17 Apr 2008 17:24:25 +0900
Takashi Inoue <[email protected]> • #14494
Re: setting dev.acpi_ibm.0.events at boot time
Thu, 17 Apr 2008 18:10:33 +1000
Norberto Meijome <[email protected]> • #14493
Re: setting dev.acpi_ibm.0.events at boot time
Thu, 17 Apr 2008 16:43:53 +0900
Takashi Inoue <[email protected]> • #14492
Re: pciconf -w
Thu, 17 Apr 2008 16:32:45 +0900
Takashi Inoue <[email protected]> • #14491
Re: pciconf -w
Thu, 17 Apr 2008 16:12:57 +0900
Takashi Inoue <[email protected]> • #14490
Re: setting dev.acpi_ibm.0.events at boot time
Thu, 17 Apr 2008 15:30:06 +1000 (EST)
Ian Smith <[email protected]> • #14489
Re: pciconf -w
Wed, 16 Apr 2008 18:36:06 -0600 (MDT)
"M. Warner Losh" <[email protected]> • #14488
Re: pciconf -w
Wed, 16 Apr 2008 18:35:54 -0600 (MDT)
"M. Warner Losh" <[email protected]> • #14487
Re: pciconf -w
Wed, 16 Apr 2008 09:03:44 -0700
Sam Leffler <[email protected]> • #14486
Re: pciconf -w
Wed, 16 Apr 2008 11:15:09 -0400
"Alexandre \"Sunny\" Kovalenko" <[email protected]> • #14485
Re: pciconf -w
Wed, 16 Apr 2008 10:37:26 -0400
John Baldwin <[email protected]> • #14484
Re: setting dev.acpi_ibm.0.events at boot time
Thu, 17 Apr 2008 00:23:15 +1000
Norberto Meijome <[email protected]> • #14483
Re: setting dev.acpi_ibm.0.events at boot time
Wed, 16 Apr 2008 20:49:49 +0900
Takashi Inoue <[email protected]> • #14482
pciconf -w
Wed, 16 Apr 2008 20:40:18 +0900
Takashi Inoue <[email protected]> • #14481
Re: setting dev.acpi_ibm.0.events at boot time
Wed, 16 Apr 2008 18:27:30 +0900
Takashi Inoue <[email protected]> • #14480
Re: setting dev.acpi_ibm.0.events at boot time
Wed, 16 Apr 2008 10:05:43 +0200
Alberto Rizzi <[email protected]> • #14479
Re: fprint (finger print sensor framework) port ready for testing
Wed, 16 Apr 2008 10:01:53 +0300
Andrey <[email protected]> • #14478
Re: fprint (finger print sensor framework) port ready for testing
Wed, 16 Apr 2008 13:06:42 +0700
"Outback Dingo" <[email protected]> • #14477
Re: battery monitor with KDE 64 bit
Wed, 16 Apr 2008 15:19:40 +1000 (EST)
Ian Smith <[email protected]> • #14476
Re: fprint (finger print sensor framework) port ready for testing
Wed, 16 Apr 2008 07:36:49 +0200
Simon Barner <[email protected]> • #14475
Re: setting dev.acpi_ibm.0.events at boot time
Wed, 16 Apr 2008 12:48:03 +0900
Takashi Inoue <[email protected]> • #14474
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 21:57:55 +0200
Fredrik Lindberg <[email protected]> • #14473
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 21:43:47 +0200
Simon Barner <[email protected]> • #14472
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 21:38:36 +0200
Simon Barner <[email protected]> • #14471
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 21:51:13 +0700
"Outback Dingo" <[email protected]> • #14470
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 23:57:32 +1000
Norberto Meijome <[email protected]> • #14469
Re: setting dev.acpi_ibm.0.events at boot time
Tue, 15 Apr 2008 23:29:22 +1000
Norberto Meijome <[email protected]> • #14468
Re: setting dev.acpi_ibm.0.events at boot time
Tue, 15 Apr 2008 09:01:45 -0400
Dan Langille <[email protected]> • #14467
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 14:46:23 +0400
Vladimir Grebenschikov <[email protected]> • #14466
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 11:40:11 +0200
Dirk-Willem van Gulik <[email protected]> • #14465
Re: fprint (finger print sensor framework) port ready for testing
Tue, 15 Apr 2008 09:56:53 +0100
Tom Evans <[email protected]> • #14464
Re: setting dev.acpi_ibm.0.events at boot time
Tue, 15 Apr 2008 16:38:43 +1000
Norberto Meijome <[email protected]> • #14463
Re: battery monitor with KDE 64 bit
Tue, 15 Apr 2008 00:06:41 +0200
Lars Engels <[email protected]> • #14462
Re: fprint (finger print sensor framework) port ready for testing
Mon, 14 Apr 2008 16:45:52 -0400
Anish Mistry <[email protected]> • #14461
fprint (finger print sensor framework) port ready for testing
Mon, 14 Apr 2008 20:07:40 +0200
Simon Barner <[email protected]> • #14460
Re: battery monitor with KDE 64 bit
Mon, 14 Apr 2008 10:18:00 +0200
mato <[email protected]> • #14459
Re: ThinkPad X61s functions keys
Mon, 14 Apr 2008 14:20:26 +1000 (EST)
Ian Smith <[email protected]> • #14458
setting dev.acpi_ibm.0.events at boot time
Sun, 13 Apr 2008 13:19:39 -0400
Dan Langille <[email protected]> • #14457
Re: ThinkPad X61s functions keys
Sun, 13 Apr 2008 11:45:19 -0400
Dan Langille <[email protected]> • #14456
Re: ThinkPad X61s functions keys
Sun, 13 Apr 2008 12:30:16 +0200
Alberto Rizzi <[email protected]> • #14455
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 21:35:27 -0700 (PDT)
besideinfo <[email protected]> • #14454
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 14:08:14 -0700 (PDT)
besideinfo <[email protected]> • #14453
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 22:35:21 +0300
Andrey <[email protected]> • #14452
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 12:09:03 -0700 (PDT)
besideinfo <[email protected]> • #14451
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 10:30:59 +0300
Andrey <[email protected]> • #14450
Re: Wireless on hp 6710b
Thu, 10 Apr 2008 16:35:10 -0700 (PDT)
besideinfo <[email protected]> • #14449
Re: Wireless on hp 6710b
Fri, 11 Apr 2008 08:14:46 +0930
Benjamin Close <[email protected]> • #14448
Re: [OT, sorry] Mail delivery failed: returning message to sender (fwd)
Thu, 10 Apr 2008 14:14:38 -0400
Dan Langille <[email protected]> • #14447
Re: [OT, sorry] Mail delivery failed: returning message to sender (fwd)
Fri, 11 Apr 2008 03:25:50 +1000 (EST)
Ian Smith <[email protected]> • #14446
Re: [OT, sorry] Mail delivery failed: returning message to sender (fwd)
Thu, 10 Apr 2008 13:24:55 -0400
Dan Langille <[email protected]> • #14445
Re: Wireless on hp 6710b
Thu, 10 Apr 2008 09:39:19 -0700 (PDT)
besideinfo <[email protected]> • #14444
Re: [OT, sorry] Mail delivery failed: returning message to sender (fwd)
Thu, 10 Apr 2008 10:21:33 -0600
Brad Davis <[email protected]> • #14443
[OT, sorry] Mail delivery failed: returning message to sender (fwd)
Thu, 10 Apr 2008 19:41:12 +1000 (EST)
Ian Smith <[email protected]> • #14442
Re: Wireless on hp 6710b
Thu, 10 Apr 2008 15:34:57 +1000 (EST)
Ian Smith <[email protected]> • #14441
Re: Wireless on hp 6710b
Wed, 9 Apr 2008 14:50:40 -0700 (PDT)
besideinfo <[email protected]> • #14440
Re: Wireless on hp 6710b
Wed, 9 Apr 2008 13:54:52 -0700 (PDT)
besideinfo <[email protected]> • #14439
S3 suspend/resume on T43p works like a charm with RELENG_7
Wed, 09 Apr 2008 19:04:58 +0200
Tobias Roth <[email protected]> • #14438
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.